Products - Guangzhou Precise Heater

Products Products

Products / Products

Release Time: 2007 - 05 - 23

Immersion TypePolymer Heat Exchanger PreciseHeater all-plastic immersion-type grid coils are suitable for heating and cooling of concentrated inorganic acids, cooling of alkaline corrosive liquids, heating or cooling of high-purity media, or aggressive and scale depositing liquids in tanks or other process equipment. They are integral components in the surface finishing and the chemical process industries. PVDF grid coils can be used for steam heating of corrosive media such as inorganic acids utilized in the steel picking industry.PreciseHeater thermoplastic heating and cooling grid coils are fabricated from standardized tubular modules which allows an optimal design to meet the customers’ specifications. All fittings and support elements are also designed according to the cust...

Ceramic Cartridge Heaters

Release Time: 2001 - 05 - 18

Ceramic Cartridge Heaters DescriptionCeramic Heating CartridgeDirect heating of liquids and under certain conditions of non-aqueous and non-liquid productsModular basisFrom 0.5 kW to 9.5 kWCeramic cartridge heaters are specially suited to the direct heating of liquids. Under certain conditions they can also be used for direct heating of non- aqueous and non-liquid mediaCeramic heating cartridgeThe cartridge heaters consist of ceramic groove bodies with high electrical insulation and excellent temperature fluctuation resistance. A high temperature heating wire is fitted as a coil in order to ensure good heat radiation and a long life-span of the cartridge.Accessories and OptionsTERMINAL CASING BCMaterial red terminal casing : PP, ref. BCMaterial white terminal casing : PVDF, ref. ...

52" 20KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 09

52' 20KW 48 watts per sq. inch Flange Heater52 inch, 20kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

Polymer Heat Exchangers

Release Time: 2001 - 04 - 04

Polymer Heat ExchangersPolymer heat exchangers are suitable forheating and cooling a variety of media whe-re metallic plate heat exchangers cannotbe used.The required size can be selected accordingto the desired thermal output and the con-tainer dimensions.The heat exchangers are integrated in thecontainer via either factory-fitted attach-ments, or via a mount on the frame.Alternatively, rods that protrude from theheat exchanger are available for fitting atthe customer’s site.The tube design implicates a large heattransfer area. The transfer area is even largerthan with plate heat exchangers at thesame displaced volume.This means that an adequate thermal out-put can be achieved despite the lower heattransfer properties of polymers.Polymer heat exchangers have PFA tubeswhich are wound onto ...

Polypropylene Cartridge Filter Chambers 2018

Release Time: 1999 - 05 - 12

Polypropylene Cartridge Filter Chambers 2018SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate8,640 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight290.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Temperature Protectors

Release Time: 1999 - 04 - 01

Temperature Protectors1, 2, and 3 Series ProtectorsThermal overload protectionThe Protector 1 overtemperature control system utilizes a heat sensitive fuse to detect overheat conditions. The protector, placed inside a thermowell, positioned in contact with the heater sheath, will cut power to the heater in the event of low liquid The Protector 2 and Protector 3 systems provide the same reliable overtemperature protection as Protector 1 However, the control systems feature a heat sensing thermostat. If the liquid level drops and the heater reaches a preset overheat heater can quickly be made operational by pushing the reset button on the control to restore power. Protector 3 is designed for flexible lead or high temperature fluoropolymer (PTFE) heater applications only.

ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTAT

Release Time: 2021 - 05 - 14

ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTATDescriptionImmersion heater element kits which include heater enclosure and digital thermostat with temperature probe. Immersion Heater with Digital Thermostat Single phase power supply connectionLow heat density, ideal for heating used/waste vegetable oils.Digital temperature controller2' BSP fittingThermocouple integrated into the elementThese heating elements are specifically designed with a low heat density. This means while the output of the heater element is still 800W or 2400W the surface of the element does not get as hot as other elements. This helps prevent degradation of the fluid being heated. Having a low heat density makes these heaters ideal for heating biodiesel and vegetable oil...

Horizontal Pumps 10000 - 40000 L/H

Release Time: 2021 - 04 - 02

Horizontal Pumps 10000 - 40000 L/HHorizontal Pumps10000 - 40000 L/HTypical applications• Hazardous and toxic solutions• Acids, alkalines and other corrosive liquids• Plating, pre- and post-treatment solutionsFeatures• Magnetic coupled, sealless providing maximum safety• High power Neodymium rare-earth magnets • Increased efficiency by incorporated vortex chamber• Robust structure providing reliable and secure performance• Highly durable PP allowing temperatures up to 80˚C• Standard with GF union connetions with a choice of sockets• Modular design for easy and low cost maintenance• Quality fasteners out of passivated Stainless Steel• European made motor with acid resistant 70 µm 2C PU coating Options• Hose adapters or flanges• Priming chamb...

Nine Element Fluoropolymer (PTFE) Heaters

Release Time: 2016 - 07 - 13

3 Phase Over the Side Nine Element Fluoropolymer (PTFE) Heaters: WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480230(9)430(17)9HXP32179HXP3417 28 (13)4500240480380(15)585(23)9HXP4.52239HXP4.5423 33 (15)6000240480535(21)735(29)9HXP62299HXP6429 36 (16.5)9000240480710(28)890(35)9HXP92359HXP9435 40 (18)12000240480965(38)1195(47)9HXP122479HXP12447 49 (22.5)150002404801195(47)1500(59)9HXP152599HXP15459 60 (27.5)180002404801400(55)1725(68)9HXP182689HXP18468 67 (30.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 ...

Products DC Power Suppliers Rectifier

You are here : Home → Products →

PFA coated Electric Immersion Heater

PFA coated Electric Immersion HeaterOur immersion heaters consist of a stainless steel heating element encapsulated with a MoldflonTM-PFA tube using a unique process which minimizes air inclusion and improves thermal efficiency. The connecting harness consists of electrical cables which are wrapped together with a PTFE film and then shrouded in a PolytetraflonTM-PTFE outer shell which can be hermetically sealed to the tank using a suitable bulk-head fitting. The combination of materials used provide a thermally stable interconnecting system suitable for use in a wide range of applications and process temperatures.The heater head is machined from solid PolytetraflonTM-PTFE without any mechanical connections. The heater tubes and connecting harness are welded in place...

Learn More

Order online

Teflon Tubular Heater

Teflon Tubular HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 304 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 230 V2 for 3 phase 230 V3 for 3 phase 400 V4 for 1 phase 240 V5 for 3 phase 415 VWattsSurface RatingHot zoneOverallPTE60010+V1000 W2,1 W/cm²460 mm570 mmPTE80018+V1800 W2,3 W/cm²610 mm780 mmPTE10022+V2200 W2,0 W/cm²780 mm980 mmPTE12528+V2800 W2,0 W/cm²900 mm1210 mmPTE15033+V3300 W2,2 W/cm²1150 mm1470 mm

Learn More

Order online

Total230StripPage20/20HomePrev... 11121314151617181920NextEnd