Anodising Jigs & RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks on the job w...
Horizontal Pumps 1000 - 3000 L/HHorizontal Pumps1000 - 3000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters
Vertical Pumps 40000 - 180000 L/HVertical Pumps40000 - 180000 L/HTypical applications• Designed and developed for low life cycle cost in corrosive low pressure applications• Scrubbing (fume and air)• Waste water treatment• RinsingFeatures• Low energy consumption due to high hydraulic efficiency and IE3 class Premium Efficiency Motor• Machined high grade Simona® AlphaPlus™ PP• Elastomers EPDM• Sealless pump, can run dry endlessly• Round mounting plate for easy installation• Including discharge pipe with GF union • Impeller locked (no damage with wrong rotation direction)• Oversized motor according to Hendor heavy duty specifications• Stainless steel shaft and fasteners (no metal in contact with liquid) • Motor 4...
Vertical Pumps 12000 - 43000 L/HVertical Pumps12000 - 43000 L/HTypical applications• Plating - Rinsing - Filtration• Waste treatmentFeatures• Immersion length 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self-priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Hose connection• Out of Tank model
Ultra High Purity Plastic Heat Exchanger of FEP/PTFE/PFA:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FN...
Barrel DanglersReplacement of Barrel Danglers, or the contact tips, should be part of any ongoing plating equipment maintenance programme. A damaged or worn dangler can impede the plating process and add to production costs.PreciseHeater Cathode Danglers for Plating EquipmentPolyurethane (PUR) plating cableHighly flexibleImpact and twist resistantAvailable in 16mm2 to 240mm2 (cross section)PVC options also suppliedDangler contact tips can be fixed or detachableContact tips supplied in mild steel, stainless steel, brass and copperDetachable tips can be provided and are particularly useful for copper and nickel plating where the tips can become coated, resulting in reduced plating efficiency. The screw-in tips can be replaced without the need for a new danglerEagle dangle...
Screwed Rod Electric immersion Heaters304 SS316 SSTitaniumWATTSVOLTSPipe Thread(NPT)IN.Number of ElementsLengthMM./INModel No.Model No.Ship Wt.LBS./(Kg)200024048023205(8)3S22083S24083T22083T2408 5 (2.5)300024048023305(12)3S32123S34123T32123T3412 6 (3)400024048023460(18)3S42183S44183T42183T4418 7 (3.5)600024048023635(25)3S62253S64253T62253T6425 8 (4)800024048023815(32)3S82323S84323T82323T8432 10 (4.5)10000240480231015(40)3S102403S104403T102403T10440 12 (5.5)12000240480231220(48)3S122483S124483T122483T12448 14 (6)15000240480231320(52)3S152523S154523T152523T15452 15 (7)18000240480231370(54)3S182543S184...
Teflon-Fluoropolymer-PTFE-Single Element Coil-HeaterOpen Fluid Path Single Phase HeaterTeflon-Fluoropolymer-PTFE-Single Element Coil-Heater:WATTSVOLTSWidthmm/in Pad Lengthmm/inOverallmm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg500120240125(5)155(6) 280(11)915(36)HXOP.5105-06-11HXOP.5205-06-11 6 (2.5)1000120240155(6)180(7) 280(11)915(36)HXOP1106-07-11HXOP1206-07-11 7 (3.5)2000120240480155(6)255(10) 430(17)890(35)HXOP2106-10-17HXOP2206-10-17HXOP2406-10-17 8 (4)3000240480155(6)305(12) 585(23)890(35)HXOP3206-12-23HXOP3406-12-23 13 (6)4000240480155(6)485(19) 735(29)890(35)HXOP4206-19-29HXOP4406-19-29 ...
Non Corrodible Industrial Immersion Heaters Fence PFA Fluoropolymer Immersion HeaterPFA Immersion Frame Heaters are great for heating fluid baths to a constant temperatureProduct DescriptionIndustrial Immersion Heaters - Fluoropolymer (PFA) Immersion Fence Heaters High performance, non-corrodable electric tank heaterThe Popular is manufactured from high integrity fluoropolymers to give best protection against deterioration and to give high performance in corrosive solutions. Now available - fitted to orderOTP: Protect your plant from catastrophic heater failure.Switches the heater off if the element gets too hot.HPD: Protect your heater from low level failure.Simple conductive level device built into the heater. The element has an open construction to allow free flow of liqu...
In-Line Fluid HeaterObtain the margin of safety you need in moderate cold weather temperatures with in-line fuel warmers from Precise Heater®. Installation is accomplished by simply routing fuel and coolant lines to the unit. Heat is exchanged inside through a series of stainless steel tubes to provide efficient fuel warming. By positioning the unit close to the fuel filter, you are obtaining maximum fuel warming efficiency and preventing costly fuel freezing and clogging at the filter. An advantage of in-line fuel warming is the flexibility of mounting applications.In-line fuel warming is a proven method providing ease of installation and economy. In extremely cold weather operation, in-line warmers are combined with in-tank heaters to provide the ultimate protection against sta...
Horizontal Filter Pumps Horizontal Filter Pumps35000 - 110000 L/HDiscs, cartridges, bagsTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filterchamber with welded bottom (no seal)• Thin discs (large filter area) or thick discs (large dirt holding capacity)• Filter paper (thin/thick), cloth, cartridges or bags• Discs can be removed in manageable stacks• All PP construction, max. temperature 80˚C• Wheels for portability may be removed once installed• Multifunctional large round slurry tank with sloping bottom• Unions for rigid piping (PP, CPVC sockets)• Standard with 3 phase motor, lead without plug, pressure gauge, air release and drain...
High Purity Flow Path PFA Inline Chemical Heater For Photovoltaic Wafer CleaningPreciseHeater's Inline Chemical Heaters are unlike any other heating technology on the mar- ket because of our thin film on PFA electric resistive technology. Our technology, combined with high-purity materials, a quick ramp up time, crevice-free design, and customizable configurations, creates reliable and efficient heater.Because of the design simplicity and flexibility, we can accommodate a wide range of application needs with only two models – a high temperature version and a low temperature version. These heaters are well-suited as a plug-and-play design for a variety of applications, especially with fluids that need to be heated quickly and at point-of-use.MAX FLOW28 LPM / 7 GPMMAX TEMPERATURE100 ...