Products Products
Products / Products
Products Temperature Controls
Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrate all necessary components into a large control cabinet. Our solution – All components necessary for the safe operation of the heating system are contained in a light grey, glass fibre reinforced polyester enclosure (protection type IP 65). The control cabinet can be mounted with stainless steel mounting brackets onto a wall directly next to the container. Standard size Technical dataKTC230KTC400Dimensions(H×W×D) in mm515×415×230mm515×415×230mmWeight12,6Kg13,9KgSupply Voltage240V-50/60Hz or 480V-3P480V-3P,50/60HzRated Maximum Current16A40AMax.Total connected Load3.6KW/240V to 10.5KW/480V 3p27...
With a temperature probe and a suitable electronic unit you can regulate and control the temperature of your liquids.The temperature probes are equipped with Pt100 sensors.Particularly in surface treatment, the precise measurement and control of temperatures is of decisive importance for the subsequent quality of the treated items. To keep the temperature of the liquid in storage tanks within the desired range, also prevents negative effects on the process liquids, such as freezing, crystallisation and excessive viscosity.The following functions need to be implemented: • Control of the temperature in order to automate process steps (such as keeping the desired process temperature)• Monitoring of the temperature in order to avoid possible damage to the process, the process liquid (e.g....
The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated into one single unit.The desired controlling temperature is set using a dial in the terminal casing  The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated in a single unit. Any change in the liquid temperature causes the fluid in the measuring system (capillary tube) to expand or contract and this moves the switch diaphragm. This, in turn, actuates a changeover contact which switches the heater on or off, as applicable. The desired controlling temperature is set with a knob in the terminal casing. Voltages ...
Total3StripPage1/1HomePrev1NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务