Products Products
  / Products
Products Metal Immersion Heaters
PTC Heaters More>>
Metal over the side Heaters PTC Immersion Heaters
LONG ELEMENT LIFE: • PTC heater element lasts longer than conventional heaters. • Will not burn out if run in air. • Will not burn out due to scale or sludge buildup. SAFE DESIGN:Heater self limits its maximum operating temperature to 250 Celsius degree. This is lower than the ignition point of most plastics. Will not melt tanks when a 1/2" (12mm) minimum distance is maintained. Overtemperature protection devices are not required. Safety is built-in, not added on. Metal-grounded construction (earth ground). Non-floating construction. SIZES: 1,000 watts (1kW) to 6,000 w...
Product Name: Metal over the side Heaters PTC Immersion Heaters
Model:
L-Shaped PTC Metal Bottom Immersion Heaters
LONG ELEMENT LIFE: • PTC heater element lasts longer than conventional heaters. • Will not burn out if run in air. • Will not burn out due to scale or sludge buildup. SAFE DESIGN:Heater self limits its maximum operating temperature to 250 Celsius degree. This is lower than the ignition point of most plastics. Will not melt tanks when a 1/2" (12mm) minimum distance is maintained. Overtemperature protection devices are not required. Safety is built-in, not added on. Metal-grounded construction (earth ground). Non-floating construction. SIZES: 1,000 watts (1kW) to 6,000 w...
Product Name: L-Shaped PTC Metal Bottom Immersion Heaters
Model:
Triple metal PTC over the side Heaters
LONG ELEMENT LIFE: • PTC heater element lasts longer than conventional heaters. • Will not burn out if run in air. • Will not burn out due to scale or sludge buildup. SAFE DESIGN:Heater self limits its maximum operating temperature to 250 Celsius degree. This is lower than the ignition point of most plastics. Will not melt tanks when a 1/2" (12mm) minimum distance is maintained. Overtemperature protection devices are not required. Safety is built-in, not added on. Metal-grounded construction (earth ground). Non-floating construction. SIZES: 2,400 watts (2.4KW) to 18,00...
Product Name: Triple metal PTC over the side Heaters
Model:
Metal Immersion Heaters More>>
Single tube metal over the side Heaters
The Single Bayonet Series offer superior performance utilizing 35 watts per square inch (5.4 w/cm2) of heating capacity. The heater head (terminal enclosure) is available in Nema 4X compliant (consult factory) or vapor tight corrosion resistant – flame retardant polypropylene, equipped with 3 foot (0.9m) corrosion resistant thermoplastic flexible conduit.  (1).Excellent CHEMICAL RESISTANCE: Single tubes Metal heaters are available for mostweak acid and alkaline solutions, plating, and phosphate solutions. (2).Heaters materials is available for Titanium and stainless steel&#...
Product Name: Single tube metal over the side Heaters
Model:
Metal L-Shaped Immersion Heaters
(1).Excellent CHEMICAL RESISTANCE: L-shaped tubes Metal heaters are available for mostweak acid and alkaline solutions, plating, and phosphate solutions. (2).Heaters materials is available for Titanium and stainless steel. (3).Watt densities:35 watts per square inch (5.4 w/cm2) of heating capacity. (4).PVC RESISTANT HEATERS HEAD. (5).Safety Thermal protection:replaceable thermal protectors is from 85°C to 150°C for solutions.(6).CERTIFICATIONS: UL and CE. (7).WATTS: FROM 1KW to 12KW.(8).VOLTAGES:120-600 volts, Sing phase and Three phase are available. (9...
Product Name: Metal L-Shaped Immersion Heaters
Model:
Triple metal over the side Heaters
(1).Excellent CHEMICAL RESISTANCE: Triple tubes Metal heaters are available for mostweak acid and alkaline solutions, plating, and phosphate solutions. (2).Heaters materials is available for Titanium and stainless steel (3).Outstanding Performance:35 watts per square inch (5.4 w/cm2) of heating capacity  (4).PVC RESISTANT HEATERS HEAD (5).Safety Thermal protection:replaceable thermal protectors is from 85°C to 150°C) for solutions. (6).CERTIFICATIONS: UL and CE. (7).WATTS: FROM 3KW to 36KW.(8).VOLTAGES:240Volts-600Volts, Sing phase and Three phase are availab...
Product Name: Triple metal over the side Heaters
Model:
PTFE Electric Immersion Heaters More>>
HX SERIES,SPIRAL PTFE HEATERS
(1).Excellent CHEMICAL RESISTANCE: suitable for all kind of acid, alkaline, anodizing and pickling solutions (2).Heaters materials is available for PTFE(Fluoropolymer):Heavy wall fluoropolymer (PTFE) covered stainless steel element reduces permeation and eliminates the need for gas purged systems. Guaranteed 100% pinhole free. (3).Long service life: Low watt density design (10 watts/square inch, 1.5 w/cm2) for long service life. (4).PVC RESISTANT HEATERS HEAD (5).Safety Grounded and Thermal protection:replaceable thermal protectors is from 80°C to 105°C for soluti...
Product Name: HX SERIES,SPIRAL PTFE HEATERS
Model:
SPIRAL L-SHAPED PTFE HEATERS
(1).Excellent CHEMICAL RESISTANCE: suitable for all kind of acid, alkaline, anodizing and pickling solutions (2).Heaters materials is available for PTFE(Fluoropolymer):Heavy wall fluoropolymer (PTFE) covered stainless steel element reduces permeation and eliminates the need for gas purged systems. Guaranteed 100% pinhole free. (3).Long service life: Low watt density design (10 watts/square inch, 1.5 w/cm2) for long service life. (4).PVC RESISTANT HEATERS HEAD (5).Safety Grounded and Thermal protection:replaceable thermal protectors is from 80°C to 105°...
Product Name: SPIRAL L-SHAPED PTFE HEATERS
Model:
LOW PROFILE PTFE HEATERS
(1).Excellent CHEMICAL RESISTANCE: suitable for all kind of acid, alkaline, anodizing and pickling solutions (2).Heaters materials is available for PTFE(Fluoropolymer):Heavy wall fluoropolymer (PTFE) covered stainless steel element reduces permeation and eliminates the need for gas purged systems. Guaranteed 100% pinhole free. (3).Long service life: Low watt density design (10 watts/square inch, 1.5 w/cm2) for long service life. (4).PVC RESISTANT HEATERS HEAD (5).Safety Grounded and Thermal protection:replaceable thermal protectors is from 80°C to 105°C for soluti...
Product Name: LOW PROFILE PTFE HEATERS
Model:
Quartz Electric Heaters More>>
Quartz Electric Immersion Heaters
（1).Excellent CHEMICAL RESISTANCE: Quartz Electric Immersion Heaters are available for most aqueous acidic plating solutions and pickling tanks (2).Heavy wall quartz sheath with replaceable metal element and polypropylene guards (complete assembly). (3).Watt densities of 25 watts per square inch (4 w/cm2) ensure long service life. (4).PVC RESISTANT HEATERS HEAD (5).Safety Thermal protection: Replaceable thermal protectors is from 80°C to 95°C) for solutions.  (6).CERTIFICATIONS: UL and CE.(7).WATTS: FROM 0.5KW to 10KW.(8).VOLTAGES:120Volts-600V...
Product Name: Quartz Electric Immersion Heaters
Model:
Temperature Controls More>>
Temperature controls(Heating Control System)
Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrate all necessary components into a large control cabinet. Our solution – All components necessary for the safe operation of the heating system are contained in a light grey, glass fibre reinforced polyester enclosure (protection type IP 65). The control cabinet can be mounted with stainless steel mounting brackets onto a wall directly next to the container. Standard size Technical dataKTC230KTC400Dimensions(H×W×D) in...
Product Name: Temperature controls(Heating Control System)
Model:
Temperature Probes with PT100 sensor
With a temperature probe and a suitable electronic unit you can regulate and control the temperature of your liquids.The temperature probes are equipped with Pt100 sensors.Particularly in surface treatment, the precise measurement and control of temperatures is of decisive importance for the subsequent quality of the treated items. To keep the temperature of the liquid in storage tanks within the desired range, also prevents negative effects on the process liquids, such as freezing, crystallisation and excessive viscosity.The following functions need to be implemented: • Control of the te...
Product Name: Temperature Probes with PT100 sensor
Model:
Rod-type Temperature thermostat
The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated into one single unit.The desired controlling temperature is set using a dial in the terminal casing  The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated in a single unit. Any change in the liquid temperature causes the fluid in the measuring system (capillary tube) to expand or contract and this moves the swi...
Product Name: Rod-type Temperature thermostat
Model:
Heat Exchangers More>>
PTFE Heat Exchangers -Fluoropolymer Heating & Cooling Coils
For heating or cooling of most aqueous acid and alkaline solutions.All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction. Heavy duty CPVC mounting bracket.2 to 4 inch thick perforated guard helps protect the coil from damage.Heavy wall tubing improves circulation and minimizes pressure drop.All coils constructed of ½-inch (13mm) tubing Integral Flexible inlet and outlet manifolds for single point connections greatly reduce the potential for leaks and simplify installation.Standard coils are made from FEP (Fluorinated Ethylene Propylene) and rated up to 30 PSI steam servic...
Product Name: PTFE Heat Exchangers -Fluoropolymer Heating & Cooling Coils
Model:
Single Round tube Metal Heating and Cooling Grid Coils
Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solutions, and rinse tanks.Heavy wall, 20-gauge metal tubing available in 316 stainless steel, and titanium.Low profile design. Every inch of coil surface is active exchange area.Precision Integral inlet and outlet manifolds for single point connections greatly reduce the potential for leaks and simplifies installation. One inch MNPT connections standard.100 PSI working pressure (steam or water).4.6 square foot to 89.8 square foot of exchange area.Inlet and outlet connections must be siz...
Product Name: Single Round tube Metal Heating and Cooling Grid Coils
Model:
Inline Fluoropolymer Chemical Heat Exchangers
lnine chemical heat exchangers are ideal for one-pass cooling of chemicals dumping to waste stream. This product is also appropriate for heating applications. The system innovatively eliminates high costs associated with water aspiration. Utilizing PP or PVDF housing and fluoropolymer tubing, It is configured for your application with custom sizes available.Service: In-line chemical heat exchanger with all fluoropolymer wetted surfaces (tubing side) for virtually any wet chemistry application.Standard Sizes: • 60 ft2 (5.5m2) of exchange area• 108 ft2 (10m2) of exchange area• 162 ft2 (15m2...
Product Name: Inline Fluoropolymer Chemical Heat Exchangers
Model:
Anode Baskets More>>
Anode baskets with bags
Standard Style:Rectangular:Thick :1.38’’- 2.5’’ x Width x LengthRound type:  2 1/2" Diameter x LengthStandard Stock Length:12’’18" 24" 30"36" 42" 48"59’’Basket Material:Titanium316 Stainless SteelZirconiumTantalumPolypropyleneStandard Length of Hook:3’’ 4’’5’’6’’ 7’’ 8’’Mesh Types:Large Expanded - 1/2" SWD x 1-1/4" LWD (75% mesh open area)Mini-Expanded - 3/16" SWD x 1/2" LWD (65% mesh open area)Perforated - 1/2" dia. on 11/16" staggered centers (50% mesh open area)Perforated Polypropylene - 1/4" dia....
Product Name: Anode baskets with bags
Model:
Special Application Heaters More>>
Flex Risers for Electric Immersion Heaters
APPLICATIONS: Provides simplified and versatile installation for L-shaped electric bottom heaters in various tank depths. The flex riser system saves dollars by reducing shipping costs since a parcel carrier can ship most heaters. RUGGED CONSTRUCTION: • Stainless steel heaters: braided 304 stainless steel sheath over a fluoropolymer (PTFE) inner tube.• Titanium heaters: Fluoropolymer (FEP) tube with integral 316 stainless steel reinforcement.• Fluoropolymer (PTFE) heaters: continuous extension of tubing with inline junction box. LONG LASTING PERFORMANCE: Liquid tight fluoropolym...
Product Name: Flex Risers for Electric Immersion Heaters
Model:
High Temperature Filters More>>
Plating Tanks More>>
Plating Process Tanks & Tank Liner
Utilized heavily in the automotive and hardware industries,Plating process tanks are ideal for coating steel parts and electroplating. With rack and barrel inserts, our plating tanks can hold the chemicals your facility uses, along with water for rinse tanks and more. We can fabricate process tanks to your exact specifications, any size, shape and capacity you require. In addition to our excellent standard industrial warranty, we can also offer extended warranties of 3 years,5 years and more on our plating process tanks. Custom Manufactured Tanks and Flexible PVC Tank Liners：...
Product Name: Plating Process Tanks & Tank Liner
Model:
MMO Coated Ti Anodes More>>
Platinum coated (Platinized) Titanium
Platinum coated (Platinized) Titanium Anodes are highly conductive anodes used in electroplating, fuel cells, and other electronic applications. Platinum coated Titanium Anodes are generally immediately available in most volumes and can be fabricated in forms such as sheet, mesh, perforated plate, rod, or wire.We can produce most materials in high purity andultra high purity (up to 99.99999%) forms and follows applicable ASTM testing standards; a range of grades are available including Mil Spec (military grade), ACS, Reagent and Technical Grade, Food, Agricultural and Pharm...
Product Name: Platinum coated (Platinized) Titanium
Model:
Ruthenium Iridium Titanium Anodes
Ruthenium-Iridium coated Titanium Anodes are a type of mixed-metal oxide (MMO) anode used in electroplating, water treatment, and other electronic applications. Ruthenium-Iridium coated Titanium Anodes are generally immediately available in most volumes and can be fabricated in forms such as sheet, mesh, perforated plate, rod, or wire.We can produce most materials in high purity andultra high purity (up to 99.99999%) forms and follows applicableASTM testing standards; a range of grades are available including Mil Spec (military grade), ACS, Reagent and Technical Grade, Food, Agricultural ...
Product Name: Ruthenium Iridium Titanium Anodes
Model:
Iridium-Tantalum coated Titanium Anodes
Iridium-Tantalum coated Titanium Anodes are a type of mixed-metal oxide (MMO) anode used in electroplating, water treatment, and other electronic applications. Iridium-Tantalum coated Titanium Anodes are generally immediately available in most volumes and can be fabricated in forms such as sheet, mesh, perforated plate, rod, or wire. We can produce most materials in high purity andultra high purity (up to 99.99999%) forms and follows applicableASTM testing standards; a range of grades are available including Mil Spec (military grade), ACS, Reagent and Technical Grade, Food, Agricultural a...
Product Name: Iridium-Tantalum coated Titanium Anodes
Model:
Titanium Products Series More>>
Titanium Clad Copper Bus Bar
Specifications for Precise Heater Ti Clad CopperRound Rod: ø 1/4"(6.35mm) - ø1 3/4"(44.5mm) Square Up to :1 1/2"(38mm) x 1 1/2"(38mm)Rectangle : Max 4"(100mm) WidthWire :0.30"(7.62mm) - 0.250"(6.35mm)Available Length Up to : 30' (10meters)Typical Ti Thickness: 0.030"(0.762mm) - 0.100"(2.54mm) We offer a line of titanium clad copper rod and bar products using our unique metallurgically bonding process. Titanium Clad Copper bus bar utilizes CP Titanium metallurgically bonded to an OFHC (Oxygen-Free High Conductivity) Copper C...
Product Name: Titanium Clad Copper Bus Bar
Model:
Titanium Anodising Jigs
Precise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation.Why Titanium Jigs:The answers are simple: 1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping. 2. Titanium racks are consistent from run to run. 3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks. 4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advant...
Product Name: Titanium Anodising Jigs
Model:
TITANIUM SCREWS AND FASTENERS
Titanium machine screws are on the smaller side of the fastener scale from #0 to 3/8″ diameter. The most popular styles are hex head, pan head, and flat head as-well-as socket cap screws.Titanium fasteners are essential in reducing the weight off an assembly. Typically, weight savings in using titanium fasteners is almost half and they are just about as strong as steel, depending on the grade. Fasteners can be found in standard sizes, as well as many custom sizes to fit all applications.Grade 2 Titanium:Grade 2 titanium fasteners are equivalent to the strength of grade 2 steel.Grade 5 Titanium...
Product Name: TITANIUM SCREWS AND FASTENERS
Model:
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
 
  Map
犀牛云提供企业云服务