Products Products
Products / Products
Release Time: 2012 - 04 - 20
DC Rectifiers 30V10AOutput power: max. 100 Watt DC current: max. 10A (at 10V)DC voltage: max. 30V (at 3A) Typical applications: Laboratory plating lines Precious metal plating: Reel-to-reel platingPCB lines:Manual plating lines DC power supply with switch mode technology, designed forfor installation into cabinet. Black anodized Aluminium housing, protection grade IP20DC connector pluggableMains supply pluggableControl terminal via RJ45Optionally the rectifier can also be installed in to a 3U/HE rack Characteristic valuesLinearity inaccuracy:- for amperage Ripple less than Mains supply: 230 V +/- 10 % / 50-60 Hz(other voltage on request)CoolingAir cooled, convection coolingAmbient temperature 5 - 40°C DisplayStatus-LED, Blink...
Release Time: 2008 - 05 - 28
Three phase Control PanelAll plastic design for a perfect usein surface treatment plants andchemicals storage areas DescriptionGalvabox 5T15-3 Control Panel, Three phasesCompact, simple to use, ready to plugDigital displayIP55A simple solution for regulation: this PID digital display control box (with input PT100 3 wires) controls up to 15 kW 400V three-phases, 50/60 Hz.Galvabox 5T15-3On-off switch with indicator light on the front.Five cable-glands for: box supply, immersion heater, PT100 probe, level security and thermal security.Accessories and OptionsPT100 3 WIRES PROBESCompact and ready to plug the galvabox range is simple to use.Digital display of set point temperature as well as temperature measured for an efficient control.The control box includes a plug-in terminal which cent...
Release Time: 2006 - 04 - 12
Tubular Heating & Cooling ExchangerStainless steel, titanium or zirconium, depending on the liquid to be heated or cooled.Take less space than a grid coil or serpentinecoil.Higher efficiency than serpentine or gridcoil with equal surface area.Easy to install.Can easily be custom fabricated.For use in most alkaline or acid solutionsVertical or horizontal configurationsEvery inch of coil surfaceis active exchange area1.5 inch thick, low profile design 316 stainless steel, Zirconium, Hastelloy C and Titanium5.4 square foot to 30.5 square foot of exchange area100 PSI working pressure (steam or water) One layerA x B x ThicknessSurface areaCoils435 x 920 x 35 mm0,5 m²Coils580 x 1080 x 35 mm0,95 m²Coils600 x 800 x 35 mm0,8 m²Coils600 x 1620 x 35 mm1,9 m²Coils735 ...
Release Time: 2001 - 05 - 30
Titanium Clad Copper Bar/ Tube/ WireApplications:DesalinationWater TreatmentPower GenerationChemical ProcessingOur Products of Clading Copper with Titanium and Zirconium are as follow:Titanium Clad Copper RodZirconium Clad Copper RodTitaniun Clad Copper WireTitanium(Zirconium) Clad Copper Round RodTitanium (Zirconium) Clad Copper Rectangle BarTitanium Clad Copper Tube
Release Time: 2001 - 05 - 02
Teflon Immersion Coils ExchangerFeatures & Values3⁄4  All wetted parts of fluoropolymer (FEP, PFA or PTFE)construction with a heavy duty CPVC mountingbracket.3⁄4  Heavy wall tubing improves circulation and minimizespressure drop. Larger coils constructed of 1/2 inch(13mm) tubing, smaller coils have 1/4 inch (7mm)tubing.3⁄4  Integral inlet and outlet manifolds for single pointconnections greatly reduce the potential for leaks andsimplify installation.3⁄4  Eliminates stray currents in the tank. SpecificationsSizes                     5.5 ft2 to 120 ft2 exchange areaPressure                Standard coils: FEP up to 30 PSIsteam pressurePFA (Perfluoroakoxy resin) up to 60P...
Release Time: 2001 - 04 - 13
Titanium Cartridge Filter (Bag type Filter)Many special treatments such as electroplating,chemical agents, and eelectrolysis involve corrosive materials.In response to the needs of different industries,titanium is used to make corrosion resistant filters.Pressure resistant. Suitable for filtering of various chemcial fluids.High filtration rate and durable. There have a rod inside for fixing on the filter. Filter effects guaranteed.Filter specification/entry and exit locations can be made according to the solution and installation need.For the production of pure titanium material, corrosion resistance, this kind of filter is small in size, light weight, convenient use, large filtering area, low block rate, filtering speed, no pollution, thermal dilute stability and chemical stability i...
Release Time: 2001 - 04 - 02
Lead anodes for Surfaces TreatmentsGeneral descriptionPreciseHeater has a long-term experience in the manufacture of lead anodes. Our extrusion press, developed by PreciseHeater, enables the manufacturing of homogeneous, high density and fine-grained pieces while guaranteeing even wear of our products and a long service life. This machine allows us to maintain this uniformity in very long pieces. At PreciseHeater, we work continuously to improve our production process. This enables us to provide every customer with specific solutions, extremely tight deadlines and very competitive prices in products of the highest quality.ApplicationsSpecial mention should be made of those products used in the hard chrome process, but we also manufacture models that are used in aluminium anodizin...
Release Time: 1997 - 06 - 19
Titanium Anode Baskets Standard Styles and SizesRectangular—21⁄2′′×6′′×LengthRound—21⁄2′′ Diameter × LengthStandard Stock lengths include 18′′, 24′′, 30′′. Other lengths built to order.All Baskets available in Titanium, Zirconium, Stainless Steel and Monel Mesh Types & Choosing the Right OneMini-Expanded—3⁄16′′×SWD×1⁄2′′LWD............ 65%meshopenareaLarge-Expanded—1⁄2′′×SWD×11⁄4′′LWD........... 75%meshopenareaPerforated — 1⁄2′′ dia. on 11⁄16′′ staggered centers . . . . . . . 50% mesh open areaSWD = Short Width Dimension LWD = Long Width Dimensions on Diamond PatternIndustry Standard calls for 2:1 Anode to Cathode ratio when calculating anodesin a bath.Mini-Expanded Mesh is the most commonly used mesh type, offering a compromise between...
Release Time: 1997 - 05 - 16
Horizontal Disc Filtration SystemsOur smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.Designed for the filtration of nickel, copper and zinc electrolytes.Operating temperature to 180 °F (82 °C)For plating tanks from 200 to approximately 400 gallons depending on the type of process.Can be supplied with horizontal discs or cartridges depending on the application.Filter Pack Easily MaintainedAll filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.SpecificationsPrecoated Flow Rate (Filtering Capacity)600 gphOpen Pumping Capacity2,400 gphFiltration Surface Area7 ft²Number of Filter Media20...
Products DC Power Suppliers Rectifier
TiCu CladTitanium clad copperTitanium Clad Copper Bus Bar :TiCu Clad – titanium Clad bars are made by using compound extrusion presses which ensures an optimal metallurgical bond between the copper core and the titanium coating.The TiCu Clad material is generally used in electrochemistry, in chlor-alkaline electrolysis, in galvanizing lines, in chromium-plating baths and wherever high corrosion protection and high current-carrying capacities are required.ApplicationsDimensionally stable anode in chlor-alkaline-electrolysisBusbars for supplying current in elecctro-zinc coating lines for strip productsBusbars for supplying current in galvanizing lines for steel stripsBusbars for supplying current in continuous coating lines for wire, tube and strip platingBusbars for supplying current in gal...
Temperature Controls (Heating Control System)Temperature ControllersCombination ControlDual Set-Point, 20 - 125 ampsProvides precise digital control for consistent plating and etch rates in most aqueous processes. Combination control features .3 inch (7.6mm), dual LED displays. Fluoropolymer (FEP) covered 10-foot 3m), 1000-ohm platinum RTD sensor included standard with the control. NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware. Dual setpoint with heating and cooling up to 30 amps. 120-240 volts. Single phase. Adjustable temperature range from -328°F (-200°C) to 4208°F (2320°C).Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrat...
Custom Grid Coils & Heat exchangers Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solutions and rinse tanks. Custom designed to your specifications. Heavy wall, 18-20 gauge tubing available in 316 stainless steel, and titanium. Single point connections reduce the potential for leaks and simplify installation.100 PSI working pressure (steam or water).
3 Phase Over the SidePTFE Over The Side Immersion Heater/ Three Element Teflon HeaterWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg1000120240280(11)430(17)3HXP11173HXP1217   10  (4.5)1500120240480405(16)585(23)3HXP1.51233HXP1.52233HXP1.5423    11  (5)2000240480560(22)735(29)3HXP22293HXP2429   12   (5.5)3000240480735(29)890(35)3HXP32353HXP3435   14   (6.5)4000240480990(39)1195(47)3HXP42473HXP4447   17   (8)50002404801220(48)1500(59)3HXP52593HXP5459   20   (9)60002404801420(56)1725(68)3HXP62683HXP6468    23   (10.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleev...
Nine elements Stainless steel HeatersImmersion Heaters | industrial heatersTubularDurable, efficient chemical heaterOver the side, durable, efficient, 9 element, tubular chemical heater. Heavy wall metal sheaths available in 316 stainless steel. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Corrosion-resistant head. Three phase. Heats up to 180°F (82°C). Three phase. 9000-31500 watts, 208-600 volts. WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg9000240480255(10)430(17)9HSP92179HSP9417   16  (7.5)13500240480405(16)585(23)9HSP13.52239HSP13.5423  19  (9)22500240480510(20)735(29)9HSP22.52299HXP22.5429   23  (10.5)31500240480635(25)865(34)9HSP...
Over-the-Side Electric Immersion Heaters for Deep Tank: 304SS316SSTITANIUMWATTSVOLTSHotzoneMM/IN.OverallMM/IN.Model No.Model no.Ship/Wt.LBS(Kg)120003804801475(48)2440(96)SP12496TP1249637(17)120003804801475(48)3050(120)SP124120TP12412045(20)120003804801475(48)3655(144)SP124144TP12414453(24)150003804801930(76)2440(96)SP15496TP1549637(17)150003804801930(76)3050(120)SP154120TP15412045(20)150003804801930(76)3655(144)SP154144TP15414453(24)180003804802085(82)2440(96)SP18496TP1849637(17)180003804802085(82)3050(120)SP184120TP18412045(20)180003804802085(82)3655(144)SP184144TP18414453(24)Durable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 35 watts/square inch (5.4 w/cm²).Vapor resi...
Derated Triple Metal L-Shaped Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240330(13)380(15)D3LSP1.5113D3LSP1.5213D3LTP1.5113D3LTP1.5213 30 (14)3000240480430(17)940(37)D3LSP3217D3LSP3417D3LTP3217D3LTP3417 33 (15)4500240480560(22)940(37)D3LSP4.5222D3LSP4.5422D3LTP4.5222D3LTP4.5422 36(16.5)6000240480660(26)940(37)D3LSP6226D3LSP6426D3LTP6226D3LTP6426 39 (18)7500240480790(31)940(37)D3LSP7.5231D3LSP7.5431D3LTP7.5231D3LTP7.5431 42 (19)9000240480915(36)1270(50)D3LSP9236D3LSP9436D3LTP9236D3LTP9436 45 (20.5)120002404801120(44)1270(50)D3LSP12244D3LSP12444D3LTP12244D3LTP12444 54 (24.5)135002404801270(50)1270(50)D3LSP13.5250D3LSP13.5450D3LTP13.5250D3LTP13.5450 60&#...
Horizontal Pumps 2000 - 12000 L/HHorizontal Pumps2000 - 12000 L/HTypical applications• Ideal for clean or slightly contaminated acids and   alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive   solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and   expensive liquids• Standard with GF union connetions with a choice of   sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for   excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection
Anodization Treatment Jigs & RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks ...
fontQuad Barrel UnitsBarrel Units For ElectroplatingPlating barrel machines are available in single, double barrel unit (tandem barrels) or multi barrel formsThe majority of parts are manufactured from PE1000 grade polyethylene, giving extended lifeBarrel drop arm carriers are reinforced with high tensile steel rods for greater strength and stabilityAll top frames are manufactured from type 304 or 316 stainless steel with powder coated finish as an optional extraUnique self-aligning system Barrel units are supplied in integral drive or tank drive formatsFeatures of PreciseHeater Motorised Barrel UnitsOur unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the s...
Lead AnodesDESCRIPTIONLead and lead alloy anodes are used in the electroplating process to alter the chemical and physical properties of metallic surfaces, depending on the application for which they are destined. For example, these types of anodes are commonly used in the chrome plating process, increasing the hardness of an object, or piece of equipment, thereby improving resistance to corrosion and preventing premature wear.PreciseHeater offers a wide range of high quality, non-sacrificial lead and lead alloy electroplating anodes, for light and heavy duty requirements. An area of expertise for us, we custom manufacture to client specifications, using only high purity metals of consistent quality. Contact the professionals at PreciseHeater to discuss your needs.APPLICATIONSElectroplatin...
Anode BagsPrecise Heater have been making high-quality anode bags for the electroplating industry for over 30 years. During that time we have strived to provide the highest quality anode bags quickly and economically. We can help with any special requests, troubleshoot problems and provide solutions.Anodes and baskets should be fitted with bags to prevent metal fines or metal residues from entering the electroplating solution. Poly nap and Polypropylene are widely used for anode bag because of its durability. However, other fabrics including cotton and other synthetics are also used successfully. We carry a complete line of materials for quick delivery.Anode Bags that Keep sludge in the bag…not in your bath! Almost all electroplating solutions require anode bags; chances are we’ve already ...
Total219StripPage14/19HomePrev...  9101112131415161718...NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务