Products Products
Products / Products
Release Time: 2023 - 02 - 13
Fluoropolymer (PTFE/PFA) Heat Exchangers The Fluoropolymer Advantage -- A leader influoropolymer heat exchangers for over 50 years –now offers shell and tube heat exchangers madewith ultrahigh-purity (UHP) PFA tubing that allowschemical processors and others to conform to thehighest standards of purity.The UHP heat exchangers are single pass, countercurrent designs that incorporate PreciseHeater’s uniquehoneycomb construction. They are ideal for heatingand cooling ultrapure water, acids and othercorrosive chemicals typically used in electronics,pharmaceutical, and semiconductor manufacture.Our new XXP280 Heat exchanger is the latesttechnology for heating and cooling, corrosive and ultrapure chemicals. The heat exchanger’s100% Fluoropolymer construction and ruggeddesign will allow...
Release Time: 2016 - 08 - 02
TiCu CladTitanium clad copperTitanium Clad Copper Bus Bar :TiCu Clad – titanium Clad bars are made by using compound extrusion presses which ensures an optimal metallurgical bond between the copper core and the titanium coating.The TiCu Clad material is generally used in electrochemistry, in chlor-alkaline electrolysis, in galvanizing lines, in chromium-plating baths and wherever high corrosion protection and high current-carrying capacities are required.ApplicationsDimensionally stable anode in chlor-alkaline-electrolysisBusbars for supplying current in elecctro-zinc coating lines for strip productsBusbars for supplying current in galvanizing lines for steel stripsBusbars for supplying current in continuous coating lines for wire, tube and strip platingBusbars for supplying current in gal...
Release Time: 2016 - 07 - 21
Temperature Controls (Heating Control System)Temperature ControllersCombination ControlDual Set-Point, 20 - 125 ampsProvides precise digital control for consistent plating and etch rates in most aqueous processes. Combination control features .3 inch (7.6mm), dual LED displays. Fluoropolymer (FEP) covered 10-foot 3m), 1000-ohm platinum RTD sensor included standard with the control. NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware. Dual setpoint with heating and cooling up to 30 amps. 120-240 volts. Single phase. Adjustable temperature range from -328°F (-200°C) to 4208°F (2320°C).Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrat...
Release Time: 2016 - 07 - 13
3 Phase Over the SidePTFE Over The Side Immersion Heater/ Three Element Teflon HeaterWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg1000120240280(11)430(17)3HXP11173HXP1217   10  (4.5)1500120240480405(16)585(23)3HXP1.51233HXP1.52233HXP1.5423    11  (5)2000240480560(22)735(29)3HXP22293HXP2429   12   (5.5)3000240480735(29)890(35)3HXP32353HXP3435   14   (6.5)4000240480990(39)1195(47)3HXP42473HXP4447   17   (8)50002404801220(48)1500(59)3HXP52593HXP5459   20   (9)60002404801420(56)1725(68)3HXP62683HXP6468    23   (10.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleev...
Release Time: 2016 - 07 - 13
Nine elements Stainless steel HeatersImmersion Heaters | industrial heatersTubularDurable, efficient chemical heaterOver the side, durable, efficient, 9 element, tubular chemical heater. Heavy wall metal sheaths available in 316 stainless steel. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Corrosion-resistant head. Three phase. Heats up to 180°F (82°C). Three phase. 9000-31500 watts, 208-600 volts. WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg9000240480255(10)430(17)9HSP92179HSP9417   16  (7.5)13500240480405(16)585(23)9HSP13.52239HSP13.5423  19  (9)22500240480510(20)735(29)9HSP22.52299HXP22.5429   23  (10.5)31500240480635(25)865(34)9HSP...
Release Time: 2016 - 07 - 13
Over-the-Side Electric Immersion Heaters for Deep Tank: 304SS316SSTITANIUMWATTSVOLTSHotzoneMM/IN.OverallMM/IN.Model No.Model no.Ship/Wt.LBS(Kg)120003804801475(48)2440(96)SP12496TP1249637(17)120003804801475(48)3050(120)SP124120TP12412045(20)120003804801475(48)3655(144)SP124144TP12414453(24)150003804801930(76)2440(96)SP15496TP1549637(17)150003804801930(76)3050(120)SP154120TP15412045(20)150003804801930(76)3655(144)SP154144TP15414453(24)180003804802085(82)2440(96)SP18496TP1849637(17)180003804802085(82)3050(120)SP184120TP18412045(20)180003804802085(82)3655(144)SP184144TP18414453(24)Durable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 35 watts/square inch (5.4 w/cm²).Vapor resi...
Release Time: 2016 - 07 - 13
Derated Triple Metal L-Shaped Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240330(13)380(15)D3LSP1.5113D3LSP1.5213D3LTP1.5113D3LTP1.5213 30 (14)3000240480430(17)940(37)D3LSP3217D3LSP3417D3LTP3217D3LTP3417 33 (15)4500240480560(22)940(37)D3LSP4.5222D3LSP4.5422D3LTP4.5222D3LTP4.5422 36(16.5)6000240480660(26)940(37)D3LSP6226D3LSP6426D3LTP6226D3LTP6426 39 (18)7500240480790(31)940(37)D3LSP7.5231D3LSP7.5431D3LTP7.5231D3LTP7.5431 42 (19)9000240480915(36)1270(50)D3LSP9236D3LSP9436D3LTP9236D3LTP9436 45 (20.5)120002404801120(44)1270(50)D3LSP12244D3LSP12444D3LTP12244D3LTP12444 54 (24.5)135002404801270(50)1270(50)D3LSP13.5250D3LSP13.5450D3LTP13.5250D3LTP13.5450 60&#...
Release Time: 2016 - 04 - 02
Horizontal Pumps 2000 - 12000 L/HHorizontal Pumps2000 - 12000 L/HTypical applications• Ideal for clean or slightly contaminated acids and   alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive   solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and   expensive liquids• Standard with GF union connetions with a choice of   sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for   excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection
Release Time: 2016 - 03 - 30
Anodization Treatment Jigs & RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks ...
Products Inline Chemical Heater
Polymer Heat ExchangersPolymer heat exchangers are suitable forheating and cooling a variety of media whe-re metallic plate heat exchangers cannotbe used.The required size can be selected accordingto the desired thermal output and the con-tainer dimensions.The heat exchangers are integrated in thecontainer via either factory-fitted attach-ments, or via a mount on the frame.Alternatively, rods that protrude from theheat exchanger are available for fitting atthe customer’s site.The tube design implicates a large heattransfer area. The transfer area is even largerthan with plate heat exchangers at thesame displaced volume.This means that an adequate thermal out-put can be achieved despite the lower heattransfer properties of polymers.Polymer heat exchangers have PFA tubeswhich are wound onto ...
3HXOL Series, Multi Element Fluoropolymer (PTFE) HeatersEXCELLENT CHEMICAL RESISTANCE TO AGGRESSIVE ACIDS Compatible with virtually any chemistry. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. 3 element, bottom heater, fluoropolymer (PTFE) sleeved 316 stainless elements. 3000-18000 watts, 208-600 volts.3HXOL Fluoropolymer HeaterSPECIFICATIONSWattages           3,000 Watts to 18,000 Watts                Voltages            208 Volts to 600 VoltsSafety FeaturesGrounded internal metal element.Built-in thermal protector. Replaceable PI protector sta...
HXO Series Single Tube, FLuoropolymer (PTFE) Immersion HeatersProduct Features and Benefits:SUPERIOR CHEMICAL RESISTANCE: Inert tomost aqueous acid, alkaline, anodizing and picklingsolutions up to 212°F (100°C).RUGGED CONSTRUCTION: Heavy wall fluoropoly-mer (PTFE) covered stainless steel element reducespermeation and eliminates the need for gas purgesystems. Guaranteed 100% pinhole free.OUSTANDING PERFORMANCE: Low watt densitydesign (10 watts/square inch, 1.5w/cm2) for long servicelife.CORROSION RESISTANT HEAD: Vapor tight, flameretardant polypropylene terminal enclosure with 3-foot(.9m) flexible PVC liquid tight conduit.SAFETY FEATURES:Grounded internal metal element.Thermal protector built in. Replaceable PT-I fusestandard for solutions up to 190°F (88°C).Non-floating...
Polypropylene Cartridge Filter Chambers 2018SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate8,640 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight290.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Temperature Protectors1, 2, and 3 Series ProtectorsThermal overload protectionThe Protector 1 overtemperature control system utilizes a heat sensitive fuse to detect overheat conditions. The protector, placed inside a thermowell, positioned in contact with the heater sheath, will cut power to the heater in the event of low liquid The Protector 2 and Protector 3 systems provide the same reliable overtemperature protection as Protector 1 However, the control systems feature a heat sensing thermostat. If the liquid level drops and the heater reaches a preset overheat heater can quickly be made operational by pushing the reset button on the control to restore power. Protector 3 is designed for flexible lead or high temperature fluoropolymer (PTFE) heater applications only.
Immersion Heat Exchanger Coils for Corrosive/Ultrapure ChemicalsToday, Immersion Coils for heating and cooling are available in a variety of shapes, materials,designs and assemblies from various manufacturers. Polymer (Polyethylene, High Performancefluoropolymer), common and exotic metal alloys, pancake coil shapes, racetrack coils, gridstructures, spaghetti tube U bends, welded and non-welded tube terminations, and tube endsconnected to a manifold are among the many options available. Less than fully informeddecisions lead to suboptimal or wrong choices (for example, based on purchase price only).Such choices end up in faster than expected deteriorating performance or even catastrophicfailure.Among materials, fluoropolymer coils have been around for 40+ years, and have secured aunique pos...
ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTATDescriptionImmersion heater element kits which include heater enclosure and digital thermostat with temperature probe.    Immersion Heater with Digital Thermostat      Single phase power supply connectionLow heat density, ideal for heating used/waste vegetable oils.Digital temperature controller2' BSP fittingThermocouple integrated into the elementThese heating elements are specifically designed with a low heat density. This means while the output of the heater element is still 800W or 2400W the surface of the element does not get as hot as other elements. This helps prevent degradation of the fluid being heated. Having a low heat density makes these heaters ideal for heating biodiesel and vegetable oil...
Horizontal Pumps 10000 - 40000 L/HHorizontal Pumps10000 - 40000 L/HTypical applications• Hazardous and toxic solutions• Acids, alkalines and other corrosive liquids• Plating, pre- and post-treatment solutionsFeatures• Magnetic coupled, sealless providing maximum safety• High power Neodymium rare-earth magnets • Increased efficiency by incorporated vortex chamber• Robust structure providing reliable and secure   performance• Highly durable PP allowing temperatures up to 80˚C• Standard with GF union connetions with a choice of   sockets• Modular design for easy and low cost maintenance• Quality fasteners out of passivated Stainless Steel• European made motor with acid resistant 70 µm 2C PU   coating Options• Hose adapters or flanges• Priming chamb...
3 Phase Over the Side Nine Element Fluoropolymer (PTFE) Heaters: WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480230(9)430(17)9HXP32179HXP3417   28  (13)4500240480380(15)585(23)9HXP4.52239HXP4.5423    33  (15)6000240480535(21)735(29)9HXP62299HXP6429   36 (16.5)9000240480710(28)890(35)9HXP92359HXP9435    40   (18)12000240480965(38)1195(47)9HXP122479HXP12447     49   (22.5)150002404801195(47)1500(59)9HXP152599HXP15459    60   (27.5)180002404801400(55)1725(68)9HXP182689HXP18468    67   (30.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 ...
Three Elements Stainless steel Heater-Plating Immersion HeatersWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480280(11)430(17)3HSP32173HSP3417   9  (4)4500240480405(16)585(23)3HSP4.52233HSP4.5423  10  (4.5)7500240480535(21)735(29)3HSP7.52293HSP7.5429   12   (5.5)10500240480660(26)865(34)3HSP10.52343HSP10.5434   14   (6.5)PRODUCT DESCRIPTIONDurable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 40 watts/square inch (6.2 w/cm²).Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.Grounded construction and built in t...
Triple Tubes Metal Immersion Heater for Deep Tank304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)485(19)3LVSP32133LVSP34133LVTP32133LVTP3413 30 (14)6000240480430(17)940(37)3LVSP62173LVSP64173LVTP62173LVTP6417 33 (15)9000240480560(22)940(37)3LVSP92223LVSP94223LVTP92223LVTP9422 36(16.5)12000240480660(26)940(37)3LVSP122263LVSP124263LVTP122263LVTP12426 39 (18)15000240480790(31)940(37)3LVSP152313LVSP154313LVTP152313LVTP15431 42 (19)18000240480915(36)1270(50)3LVSP182363LVSP184363LVTP182363LVTP18436 45 (20.5)240002404801120(44)1270(50)3LVSP242443LVSP244443LVTP242443LVTP24444 54 (24.5)270002404801270(50)1270(50)3LVSP272503LVSP274503LVTP272503LVTP27450 60 (27.5)30000...
2KW To 18KW Baths Inline Fluid Heater PFA Immersion Frame HeatersPFA Immersion Frame Heaters are great for heating fluid baths to a constant temperatureMarketsSemiconductorLife SciencesIndustrialApplicationsFluid HeatingFluoropolymer Sleeve Heating Element Quality resistance element is sleeved in braided material for even coil separation. The entire element is given an outer sleeving of pretested and pre-extruded fluoropolymer tubing. THIS IS NOT A COATED PRODUCT.Over-temperature Thermocouple The over-temperature cutoff device protects the integrity of the fluoropolymer heater. If an opera- tor should leave the heater on while draining or aspirating a tank, when used in conjunction with a temperature control device, it will automatically shut off the heater when it is exposed to air.PRODUC...
Total254StripPage18/22HomePrev...  13141516171819202122NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务