Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → Immersion Coils Heat Exchangers > PTFE Immersion Coils Exchanger

Immersion Type Polymer Heat Exchanger

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

Immersion TypePolymer Heat Exchanger PreciseHeater all-plastic immersion-type grid coils are suitable for heating and cooling of concentrated inorganic acids, cooling of alkaline corrosive liquids, heating or cooling of high-purity media, or aggressive and scale depositing liquids in tanks or other process equipment. They are integral components in the surface finishing and the chemical process industries. PVDF grid coils can be used for steam heating of corrosive media such as inorganic acids utilized in the steel picking industry.PreciseHeater thermoplastic heating and cooling grid coils are fabricated from standardized tubular modules which allows an optimal design to meet the customers’ specifications. All fittings and support elements are also designed according to the cust...

Catalog Download

Inquiry

Features

Immersion Type Polymer Heat Exchanger

PreciseHeater all-plastic immersion-type grid coils are suitable for heating and cooling of concentrated inorganic acids, cooling of alkaline corrosive liquids, heating or cooling of high-purity media, or aggressive and scale depositing liquids in tanks or other process equipment. They are integral components in the surface finishing and the chemical process industries. PVDF grid coils can be used for steam heating of corrosive media such as inorganic acids utilized in the steel picking industry.

PreciseHeater thermoplastic heating and cooling grid coils are fabricated from standardized tubular modules which allows an optimal design to meet the customers’ specifications. All fittings and support elements are also designed according to the customers’ requirements.

The tube modules are produced using a unique manufacturing process, insuring minimal pressure loss, while providing high heating/cooling performance.

The modular design allows us to customize the heat exchanger fabrication to create the most efficient cooling or heating flow to meet our customers’ needs. The modules have very high surface area in a very compact space so that the Calorplast heat exchangers utilize minimum space in the tank.

Each PreciseHeater heat exchanger is calculated and optimized using a computer-aided simulation allowing us to create the most reliable configuration at a reasonable price.

Our heat exchangers are easily cleaned using pressurized water, steam or chemicals insuring a long operating life.

Immersion Type Polymer Heat Exchanger

Cooling/heating/condensing

Heating and cooling of corrosive or scale forming fluids and highly concentrated inorganic acids in open tanks

Heating, cooling, condensing or evaporation of corrosive media in vessels

Customized design from modular, pre-manufactured tube sections

10 to 375 ft2 heat transfer surface
For use with water, steam or cooling media

Immersion Type Polymer Heat Exchanger

Technical Data

Immersion Type Polymer Heat Exchanger

High cooling and heating efficiency Flexible and compact design
Fully corrosion resistant
Safe heat transfer medium

Best in class flow efficiency
Easy maintenance and cleaning More than 30 years of experience

Immersion Type Polymer Heat Exchanger

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

PTFE Coil Heat Exchangers & Immersion Heat Exchangers

Release Time: 2021 - 03 - 16

PTFE Coil Heat Exchangers & Immersion Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 F...

PTFE(Fluoropolymer) Immersion Coils

Release Time: 2021 - 03 - 01

PTFE (Fluoropolymer) Immersion CoilsTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32553/4 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771&#...

Heat Exchangers - PFA, FEP, Fluoropolymer Heat Exchangers

Release Time: 2021 - 03 - 16

Heat Exchangers - PFA, FEP, Fluoropolymer Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 F...

Fluoropolymer(PTFE) Tubing Coil Heat Exchangers

Release Time: 2021 - 03 - 16

Fluoropolymer (PTFE) Tubing Coil Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1...

High Purity Heating and Cooling Immersion Coils

Release Time: 2021 - 03 - 16

High Purity Heating and Cooling Immersion Coils of PTFE/FEP/PFA:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-3...

Immersion Coil & Shell & Tube Type Heat Exchanger

Release Time: 1992 - 03 - 24

Immersion Coil & Shell & Tube Type Heat ExchangerThe new type is different from the traditional welded heat exchanger. PreciseHeaterprovides a special joint design (one piece without welded line) with excellent chemical resistance of PFA Tube, the application of pressure and corrosion resistance has a very excellent performance.In addition, because of PFA tube excellent flatness and ultra-low metal ion precipitation characteristics, it is not easy to attach dirt when used, it can also maintain the purity of the liquid for a long time to extend the service life.It has excellent properties are widely used in high temperature, high purity, high corrosive environment, such as the semiconductor industry, panel industry, PCB and steel industry...etc.There are several types:Free TypeModul...

Teflon(Fluoroplastic) Immersion Heat Exchangers

Release Time: 2016 - 07 - 21

Teflon(Fluoroplastic) Immersion Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80)XC-40-3483.51 FNPT39...

Teflon Immersion Coils Exchanger

Release Time: 2001 - 05 - 02

Teflon Immersion Coils ExchangerEliminates stray currents in tanks. Excellent chemical compatibility and rugged design for your heating or cooling application. All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction with a heavy duty CPVC/PVDF mounting bracket. Standard coils are PTFE and rated up to 80 PSI steam service. PFA coils are available for steam service up to 80 PSI. 10 PSI minimum steam pressure required for operation. Heavy wall tubing improves circulations and reduces pressure drop. Features & Values3⁄4 All wetted parts of fluoropolymer (FEP, PFA or PTFE)construction with a heavy duty CPVC mountingbracket.3⁄4 Heavy wall tubing improves circulation and minimizespressure drop. Larger coils constructed of 1/2 inch(13mm) tubing, smaller coils have 1/...

Plastic Immersion-Type Heat Exchanger

Release Time: 1995 - 02 - 13

Plastic Immersion-Type Heat ExchangerFurther details:Possible materials: PE-RT,PFA,FEP, PP and PVDFTemperature range: -22 to 284 °F (depending on the material chosen)Working pressure range: 45.5 to 232 oF (depending on the material chosen and the operating temperature)Cooling/heating/condensing Heating and cooling of corrosive or scale forming fluids and highly concentrated inorganic acids in open tanksHeating, cooling, condensing or evaporation of corrosive media in vesselsCustomized design from modular, pre-manufactured tube sections10 to 375 ft2 heat transfer surfaceFor use with water, steam or cooling media High cooling and heating efficiency Flexible and compact designFully corrosion resistantSafe heat transfer mediumBest in class flow efficiencyEasy maintenance an...

Ultra High Purity Plastic Heat Exchanger

Release Time: 2021 - 03 - 16

Ultra High Purity Plastic Heat Exchanger of FEP/PTFE/PFA:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FN...

Fluoropolymer (PTFE/PFA) Heat Exchangers

Release Time: 2023 - 02 - 13

Fluoropolymer (PTFE/PFA) Heat Exchangers The Fluoropolymer Advantage -- A leader influoropolymer heat exchangers for over 50 years –now offers shell and tube heat exchangers madewith ultrahigh-purity (UHP) PFA tubing that allowschemical processors and others to conform to thehighest standards of purity.The UHP heat exchangers are single pass, countercurrent designs that incorporate PreciseHeater’s uniquehoneycomb construction. They are ideal for heatingand cooling ultrapure water, acids and othercorrosive chemicals typically used in electronics,pharmaceutical, and semiconductor manufacture.Our new XXP280 Heat exchanger is the latesttechnology for heating and cooling, corrosive and ultrapure chemicals. The heat exchanger’s100% Fluoropolymer construction and ruggeddesign will allow...

Electric Immersion coil heat exchangers

Release Time: 2001 - 03 - 14

Electric Immersion coil heat exchangersImmersion coil heat exchangers are often used in a variety of applications where a fluid needs to either be heated, cooled, or maintained at a specified temperature by the end user. Immersion coils most common uses are in industrial applications for tanks that may be exposed to outside temperatures and weather, surface finishing applications where an acid is used to apply a coating to a product (this could be galvanizing, chrome plating, or nickel-plating applications), steel pickling applications, energy storage applications where a basic solution is used to harvest excess energy from a power grid, and many other applications that have heating or cooling needs.An immersion coil is a heat transfer device that is directly immersed into a tank of soluti...

High Quality Immersion Coils Heat Exchangers

Release Time: 2023 - 02 - 13

High Quality Immersion Coils Heat ExchangersImmersion Coil Heat Exchangers have small tubes made out of flexible fluoropolymer that are braided into coils. Coils can be installed into almost any tank configuration. Braids are separated by spacers for optimum thermal performance.Unlike some immersion coils made of sub-quality material, PreciseHeater tubing is made of high-quality FEP, PFA or proprietary Q-Series resins. As the original manufacturer of fluoropolymer heat exchangers, PreciseHeater has the tightest quality specs and the most experience solving scale and fouling issues.PreciseHeater heat exchangers feature braided tubing bundles and unique fused ends that provide significantly better heat transfer from a smaller footprint than similar heat exchangers, allowing installation in v...

PVDF/PFA Inline Heat Exchangers

Release Time: 2008 - 05 - 07

PVDF/PFA Inline Chemical Heat ExchangersPVDF/PFA heat exchangers offer a variety of solutions for heating, cooling, andtemperature trimming of fluids used in ultra-puremanufacturing processes. They are ideal for heatingand cooling deionized water, solvents, and Piranha/SC1, among other high-purity fluids. VesperTM productsare available as standalone heat exchangers, or asintegrated heaters and heat exchangers. VesperTMhousings are PP, PVDF, or PFA, and the heatexchanger tube bundles are PFA to ensure chemicalcompatibility. All models are available in various sizes. All-in-OneHeaters & Heat ExchangersPH Series are compact all-in-one heater andheat exchangers. They are ideal for heating and cooling.They offer large surface areas for heat exchange andfast temperature respo...

Immersion Type Polymer Heat Exchanger

Release Time: 2007 - 05 - 23

Polymer Heat Exchangers

Release Time: 2001 - 04 - 04

Polymer Heat ExchangersPolymer heat exchangers are suitable forheating and cooling a variety of media whe-re metallic plate heat exchangers cannotbe used.The required size can be selected accordingto the desired thermal output and the con-tainer dimensions.The heat exchangers are integrated in thecontainer via either factory-fitted attach-ments, or via a mount on the frame.Alternatively, rods that protrude from theheat exchanger are available for fitting atthe customer’s site.The tube design implicates a large heattransfer area. The transfer area is even largerthan with plate heat exchangers at thesame displaced volume.This means that an adequate thermal out-put can be achieved despite the lower heattransfer properties of polymers.Polymer heat exchangers have PFA tubeswhich are wound onto ...

Immersion Heat Exchanger Coils for Corrosive/Ultrapure Chemicals

Release Time: 2024 - 04 - 01

Immersion Heat Exchanger Coils for Corrosive/Ultrapure ChemicalsToday, Immersion Coils for heating and cooling are available in a variety of shapes, materials,designs and assemblies from various manufacturers. Polymer (Polyethylene, High Performancefluoropolymer), common and exotic metal alloys, pancake coil shapes, racetrack coils, gridstructures, spaghetti tube U bends, welded and non-welded tube terminations, and tube endsconnected to a manifold are among the many options available. Less than fully informeddecisions lead to suboptimal or wrong choices (for example, based on purchase price only).Such choices end up in faster than expected deteriorating performance or even catastrophicfailure.Among materials, fluoropolymer coils have been around for 40+ years, and have secured aunique pos...

Fluoropolymer Heat Exchangers

Release Time: 2001 - 11 - 01

Fluoropolymer Heat ExchangersPH heat exchanger manufacturers who make or use extremely corrosive liquids require corrosion-resistant heat exchanger materials to achieve reliable processes. These are processes that require dilution, condensation, heating, cooling, and crystallization. Fluoropolymer tubing, piping and heat exchangers are essential for industrial companies involved Making or using dilute sulfuric acid, nitric acid, hydrochloric acid, and hydrofluoric acid. 2. Acid recycling/regeneration 3.Metal finishing including galvanizing, plating, cleaning, and pickling Producing chlor-alkali or caustic soda.Thousands of customers around the world enjoy lower operational costs by using our heat exchangers day-in and day-out with flawless performance. That’s because, as ...

Teflon Tubular Coils Heat Exchanger

Release Time: 2016 - 03 - 27

Teflon Tubular Coils Heat ExchangerTUBULAR HEAT/COOLING EXCHANGERTEFLON TUBECOILSPRODUCT DESCRIPTIONExcellent chemical compatibility and rugged design for your heating or cooling application.FEATURESAll wetted parts of fluoropolymer (FEP, PFA, or PTFE) construction.Heavy duty CPVC mounting bracket and 1/8-inch thick perforated guard helps protect the coil from damage.Heavy wall tubing improves circulation and minimizes pressure drop.SPECIFICATIONSStandard coils are FEP and rated up to 60 PSI steam service. PFA coils are available for steam service up to 140 PSI.5.5 square foot to 120 square foot of exchange area standard.20 PSI minimum steam pressure required for operation.Tubing sizes: 1/2 inch (12.5mm) diameter for larger coils and 1/4 inch (6.5mm) diameter for smaller coils.Inlet and Ou...

Industrial PTFE Immersion Coils Heat Exchanger

Release Time: 2021 - 03 - 16

Industrial PTFE Immersion Coils Heat Exchanger:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(100...

1Mpa PTFE Immersion Coil Heat Exchanger For Heating And Cooling

Release Time: 2001 - 12 - 02

1Mpa PTFE Immersion Coil Heat Exchanger For Heating And CoolingTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80)XC-40...

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16