Products Products
Products / Products
Products Metal Immersion Heaters
Specifications for Precise Heater Ti Clad CopperRound Rod: ø 1/4"(6.35mm) - ø1 3/4"(44.5mm) Square Up to :1 1/2"(38mm) x 1 1/2"(38mm)Rectangle : Max 4"(100mm) WidthWire :0.30"(7.62mm) - 0.250"(6.35mm)Available Length Up to : 30' (10meters)Typical Ti Thickness: 0.030"(0.762mm) - 0.100"(2.54mm) We offer a line of titanium clad copper rod and bar products using our unique metallurgically bonding process. Titanium Clad Copper bus bar utilizes CP Titanium metallurgically bonded to an OFHC (Oxygen-Free High Conductivity) Copper Core.Ti Clad Copper has excellent conductivity and is fully ductile for shaping and forming. Ti Clad Copper also has great weldability for connecting, capping and joining. Our custom processing methods...
Platinum coated (Platinized) Titanium Anodes are highly conductive anodes used in electroplating, fuel cells, and other electronic applications. Platinum coated Titanium Anodes are generally immediately available in most volumes and can be fabricated in forms such as sheet, mesh, perforated plate, rod, or wire.We can produce most materials in high purity andultra high purity (up to 99.99999%) forms and follows applicable ASTM testing standards; a range of grades are available including Mil Spec (military grade), ACS, Reagent and Technical Grade, Food, Agricultural and Pharmaceutical Grade, Optical Grade,USP andEP/BP (European Pharmacopoeia/British Pharmacopoeia). We can also produce materials to custom specifications by request, in addition to custom comp...
Standard Style:Rectangular:Thick :1.38’’- 2.5’’ x Width x LengthRound type:  2 1/2" Diameter x LengthStandard Stock Length:12’’18" 24" 30"36" 42" 48"59’’Basket Material:Titanium316 Stainless SteelZirconiumTantalumPolypropyleneStandard Length of Hook:3’’ 4’’5’’6’’ 7’’ 8’’Mesh Types:Large Expanded - 1/2" SWD x 1-1/4" LWD (75% mesh open area)Mini-Expanded - 3/16" SWD x 1/2" LWD (65% mesh open area)Perforated - 1/2" dia. on 11/16" staggered centers (50% mesh open area)Perforated Polypropylene - 1/4" dia. on 3/8" staggered centers (40% mesh open area)Amperage Rating per Hook:25AMP = 1/8" x 1" Double Contact Hook or 3/8" Square Bar Hook50AMP = 1/4" x 1" Double Contact Hook...
Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrate all necessary components into a large control cabinet. Our solution – All components necessary for the safe operation of the heating system are contained in a light grey, glass fibre reinforced polyester enclosure (protection type IP 65). The control cabinet can be mounted with stainless steel mounting brackets onto a wall directly next to the container. Standard size Technical dataKTC230KTC400Dimensions(H×W×D) in mm515×415×230mm515×415×230mmWeight12,6Kg13,9KgSupply Voltage240V-50/60Hz or 480V-3P480V-3P,50/60HzRated Maximum Current16A40AMax.Total connected Load3.6KW/240V to 10.5KW/480V 3p27...
APPLICATIONS: Provides simplified and versatile installation for L-shaped electric bottom heaters in various tank depths. The flex riser system saves dollars by reducing shipping costs since a parcel carrier can ship most heaters. RUGGED CONSTRUCTION: • Stainless steel heaters: braided 304 stainless steel sheath over a fluoropolymer (PTFE) inner tube.• Titanium heaters: Fluoropolymer (FEP) tube with integral 316 stainless steel reinforcement.• Fluoropolymer (PTFE) heaters: continuous extension of tubing with inline junction box. LONG LASTING PERFORMANCE: Liquid tight fluoropolymer tube is chemically inert and is protected by either a stainless steel outer braid (stainless steel heaters) or reinforced core (titanium heaters). SAFETY FEATURES: Thermal protection standard ...
Utilized heavily in the automotive and hardware industries,Plating process tanks are ideal for coating steel parts and electroplating. With rack and barrel inserts, our plating tanks can hold the chemicals your facility uses, along with water for rinse tanks and more. We can fabricate process tanks to your exact specifications, any size, shape and capacity you require. In addition to our excellent standard industrial warranty, we can also offer extended warranties of 3 years,5 years and more on our plating process tanks. Custom Manufactured Tanks and Flexible PVC Tank Liners: ·  Process Tanks·  Sectioned Plastic Tanks·  Chemical Storage Tanks·  Vertical Storage Tanks·  Horizontal Storage Tanks...
For heating or cooling of most aqueous acid and alkaline solutions.All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction. Heavy duty CPVC mounting bracket.2 to 4 inch thick perforated guard helps protect the coil from damage.Heavy wall tubing improves circulation and minimizes pressure drop.All coils constructed of ½-inch (13mm) tubing Integral Flexible inlet and outlet manifolds for single point connections greatly reduce the potential for leaks and simplify installation.Standard coils are made from FEP (Fluorinated Ethylene Propylene) and rated up to 30 PSI steam service.PFA (Perfluoroakoxy resin) coils are available for steam service up to 60 PSI. 10 PSI minimum steam pressure required for operation. Consult factory regarding pressure reduced applications.Eliminate...
Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solutions, and rinse tanks.Heavy wall, 20-gauge metal tubing available in 316 stainless steel, and titanium.Low profile design. Every inch of coil surface is active exchange area.Precision Integral inlet and outlet manifolds for single point connections greatly reduce the potential for leaks and simplifies installation. One inch MNPT connections standard.100 PSI working pressure (steam or water).4.6 square foot to 89.8 square foot of exchange area.Inlet and outlet connections must be sized to adequately handle water and steam volume requirements. Generally, larger inlet sizes are needed for grid coils larger than 33 sq. ft. (for steam) and 25 sq. ft. (for water).Custom riser sizes av...
LONG ELEMENT LIFE: • PTC heater element lasts longer than conventional heaters. • Will not burn out if run in air. • Will not burn out due to scale or sludge buildup. SAFE DESIGN:Heater self limits its maximum operating temperature to 250 Celsius degree. This is lower than the ignition point of most plastics. Will not melt tanks when a 1/2" (12mm) minimum distance is maintained. Overtemperature protection devices are not required. Safety is built-in, not added on. Metal-grounded construction (earth ground). Non-floating construction. SIZES: 1,000 watts (1kW) to 6,000 watts (6kW).  VOLTAGES:: Three voltage ranges available: 110-120 volt, 200-240 volt, and 380-480 volt. Heater is available in single or three phase power. CORROSION RESISTANT HEADS: ...
(1).Excellent CHEMICAL RESISTANCE: suitable for all kind of acid, alkaline, anodizing and pickling solutions (2).Heaters materials is available for PTFE(Fluoropolymer):Heavy wall fluoropolymer (PTFE) covered stainless steel element reduces permeation and eliminates the need for gas purged systems. Guaranteed 100% pinhole free. (3).Long service life: Low watt density design (10 watts/square inch, 1.5 w/cm2) for long service life. (4).PVC RESISTANT HEATERS HEAD (5).Safety Grounded and Thermal protection:replaceable thermal protectors is from 80°C to 105°C for solutions. (6).CERTIFICATIONS: UL and CE. (7).WATTS: FROM 0.5KW to 9KW (8).VOLTAGES:120-600 volts, Sing phase Only (9).We have custom-built heaters and can make any Watts,voltages with t...
(1).Excellent CHEMICAL RESISTANCE: Quartz Electric Immersion Heaters are available for most aqueous acidic plating solutions and pickling tanks (2).Heavy wall quartz sheath with replaceable metal element and polypropylene guards (complete assembly). (3).Watt densities of 25 watts per square inch (4 w/cm2) ensure long service life. (4).PVC RESISTANT HEATERS HEAD (5).Safety Thermal protection: Replaceable thermal protectors is from 80°C to 95°C) for solutions.  (6).CERTIFICATIONS: UL and CE.(7).WATTS: FROM 0.5KW to 10KW.(8).VOLTAGES:120Volts-600Volts, Sing phase and Three phase are available (9).We have custom-made heaters and can make any Watts,voltages with the size according customers’ requirement (10).OPTIONS :(consult Our FACTO...
The Single Bayonet Series offer superior performance utilizing 35 watts per square inch (5.4 w/cm2) of heating capacity. The heater head (terminal enclosure) is available in Nema 4X compliant (consult factory) or vapor tight corrosion resistant – flame retardant polypropylene, equipped with 3 foot (0.9m) corrosion resistant thermoplastic flexible conduit.  (1).Excellent CHEMICAL RESISTANCE: Single tubes Metal heaters are available for mostweak acid and alkaline solutions, plating, and phosphate solutions. (2).Heaters materials is available for Titanium and stainless steel (3).Watt densities:35 watts per square inch (5.4 w/cm2) of heating capacity  (4).PVC RESISTANT HEATERS HEAD (5).Safety Thermal protection:replaceable thermal protectors is from 85°C...
Total53StripPage1/5HomePrev12345NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务