Products Products
Products / Products
Release Time: 1997 - 05 - 16
Horizontal Disc Filtration SystemsOur smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.Designed for the filtration of nickel, copper and zinc electrolytes.Operating temperature to 180 °F (82 °C)For plating tanks from 200 to approximately 400 gallons depending on the type of process.Can be supplied with horizontal discs or cartridges depending on the application.Filter Pack Easily MaintainedAll filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.SpecificationsPrecoated Flow Rate (Filtering Capacity)600 gphOpen Pumping Capacity2,400 gphFiltration Surface Area7 ft²Number of Filter Media20...
Release Time: 1996 - 05 - 17
Polypropylene Cartridge Filter Chambers 2008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate3,840 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight265.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Release Time: 1995 - 02 - 16
Metal Triple Tube Style Plating Immersion Heater These heaters – the 3P, 3S, 3F, and 3T series – are built with three side-by-side elements and fit easily next to the wall of a tank. The standard wiring is three-phase, but single-phase is available. They have a watt density of 35 W/in².Select a heater below by wattage and sheath material to go to an ordering page, where you can choose voltage and other options. If you don't know what sheath material you need, you can use our Material Selector.Design Features for TMM2T1 thermal fuse protection standard; T2 bi-metal switch optionalGrounded for safetyVapor-tight polypropylene terminal enclosure with universal mounting flangeStandard 3-ft. flexible PVC liquid-tight conduit120, 240, 480 volts standard as listed...
Release Time: 1995 - 02 - 13
Plastic Immersion-Type Heat ExchangerFurther details:Possible materials: PE-RT,PFA,FEP, PP and PVDFTemperature range: -22 to 284 °F (depending on the material chosen)Working pressure range: 45.5 to 232 oF (depending on the material chosen and the operating temperature)Cooling/heating/condensing Heating and cooling of corrosive or scale forming fluids and highly concentrated inorganic acids in open tanksHeating, cooling, condensing or evaporation of corrosive media in vesselsCustomized design from modular, pre-manufactured tube sections10 to 375 ft2 heat transfer surfaceFor use with water, steam or cooling media High cooling and heating efficiency Flexible and compact designFully corrosion resistantSafe heat transfer mediumBest in class flow efficiencyEasy maintenance an...
Release Time: 1992 - 04 - 19
TUBULAR HEATERS - Titanium Over the side HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 316 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 120-240 V2 for 3 phase 120-240 V3 for 3 phase 208-600 V4 for 1 phase 208-480 V5 for 3 phase 415 V,600VWattsSurface RatingHot zoneLPTI50010+V1000 W2,1 W/cm²370 mm480 mmPTI60020+V2000 W3,0 W/cm²460 mm570 mmPTI80020+V2000 W2,3 W/cm²610 mm780 mmPTI80025+V2500 W2,9 W/cm²610 mm780 mmPTI10030+V3000 W2,6 W/cm²780 mm980 mmPTI12535+V...
Release Time: 2023 - 02 - 27
HX Series,Fluoropolymer (PTFE) Single-Element Coil HeaterTypical ApplicationsCompatible with most plating tank solutions; inert to acids,anodizing and pickling solutions up to 190°F (88°C). Checkcompatibility guide on pages 11-88 and 11-89 and withchemical supplier for proper sheath material selection. Replaces more expensive alumina or graphite heaters.Design Features✴  10 watts/in2 (1.4 watts/cm2) for long service life✴  Non-contaminating Fluoropolymer (PTFE) covered stainless steel elements✴  T1 thermal fuse protection standard; T2 bi-metal switchoptional✴  Grounded internal metal element for safety✴  UL listed for US and Canada✴  Lightweight, non-floating construction✴  Vapor-tight polypropylene terminal enclosure withuniversal mou...
Release Time: 2021 - 05 - 06
Polypropylene Cartridge Filter Chambers 3008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Release Time: 2021 - 04 - 21
Tubular HeatersTubular heating elements from PreciseHeater™ are the most versatile and the best-suited industrial heating solution for a large number of applications. Tubular elements from PreciseHeater™ are factory-configured to almost any shape or size. Custom bending diameters can be made upon request and we can manufacture a variety of industrial heating solutions such as flanged tubular heaters. Tubular heaters are typically made using steel, stainless steel, Incoloy, inconel or titanium alloys. Tubular elements are often regarded as the foundation of all heating elements. These heating elements have a strong outer sheath to help protect the process heater from physical stress and uses high quality alloys to allow efficient heat transfer from resistance coil to you...
Release Time: 2021 - 04 - 20
DC Rectifiers 1000A/DC power suppliesOutput power: max. 12000 Watt DC current: max. 1000A (at 12V) DC voltage: max. 1000V (at 10A) Typical applications: Laboratory plating lines Precious metal plating: Reel-to-reel platingPCB lines:Manual plating lines DC power supply with switch mode technology, designed for for installation into cabinet.Characteristic valuesLinearity inaccuracy:- for amperage - for voltage Ripple less than Efficiency typical 85 %Powerfactor cos φ 0,95Constant current and voltage control Soft start function Over temperature protectionPulse operation optionalMains supply: standard 3 x 380-600 V +/- 10 % / 50-60 Hz without N(other voltages on request) CoolingOptimized cooling air guiding, air consumption max....
Products Inline Chemical Heater
Over-the-Side Electric Immersion Heaters for Deep Tank: 304SS316SSTITANIUMWATTSVOLTSHotzoneMM/IN.OverallMM/IN.Model No.Model no.Ship/Wt.LBS(Kg)120003804801475(48)2440(96)SP12496TP1249637(17)120003804801475(48)3050(120)SP124120TP12412045(20)120003804801475(48)3655(144)SP124144TP12414453(24)150003804801930(76)2440(96)SP15496TP1549637(17)150003804801930(76)3050(120)SP154120TP15412045(20)150003804801930(76)3655(144)SP154144TP15414453(24)180003804802085(82)2440(96)SP18496TP1849637(17)180003804802085(82)3050(120)SP184120TP18412045(20)180003804802085(82)3655(144)SP184144TP18414453(24)Durable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 35 watts/square inch (5.4 w/cm²).Vapor resi...
Derated Triple Metal L-Shaped Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240330(13)380(15)D3LSP1.5113D3LSP1.5213D3LTP1.5113D3LTP1.5213 30 (14)3000240480430(17)940(37)D3LSP3217D3LSP3417D3LTP3217D3LTP3417 33 (15)4500240480560(22)940(37)D3LSP4.5222D3LSP4.5422D3LTP4.5222D3LTP4.5422 36(16.5)6000240480660(26)940(37)D3LSP6226D3LSP6426D3LTP6226D3LTP6426 39 (18)7500240480790(31)940(37)D3LSP7.5231D3LSP7.5431D3LTP7.5231D3LTP7.5431 42 (19)9000240480915(36)1270(50)D3LSP9236D3LSP9436D3LTP9236D3LTP9436 45 (20.5)120002404801120(44)1270(50)D3LSP12244D3LSP12444D3LTP12244D3LTP12444 54 (24.5)135002404801270(50)1270(50)D3LSP13.5250D3LSP13.5450D3LTP13.5250D3LTP13.5450 60&#...
Horizontal Pumps 2000 - 12000 L/HHorizontal Pumps2000 - 12000 L/HTypical applications• Ideal for clean or slightly contaminated acids and   alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive   solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and   expensive liquids• Standard with GF union connetions with a choice of   sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for   excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection
Anodization Treatment Jigs & RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks ...
fontQuad Barrel UnitsBarrel Units For ElectroplatingPlating barrel machines are available in single, double barrel unit (tandem barrels) or multi barrel formsThe majority of parts are manufactured from PE1000 grade polyethylene, giving extended lifeBarrel drop arm carriers are reinforced with high tensile steel rods for greater strength and stabilityAll top frames are manufactured from type 304 or 316 stainless steel with powder coated finish as an optional extraUnique self-aligning system Barrel units are supplied in integral drive or tank drive formatsFeatures of PreciseHeater Motorised Barrel UnitsOur unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the s...
Low Density PFA Bottom Immersion Heater 1.0kW To 30kW Chemical Solution HeaterMarketsSemiconductorLife SciencesIndustrialPFA heaters are designed specifically for use as direct electric heaters in plants and tanks where space is at a premium and high heating capacities and excellent resistance to aggressive process liquids are required. The very good chemical resistance of the heating cable is achieved by the use of a special sheath made of FEP or PFA. The surface power density is only 1 W/cm2.The PFA sheath should be selected for particularly critical operating conditions in extremely aggressive process liquids (such as mixed-acid chrome electrolyte) and for very high liquid temperatures (max. 100°C). The wide range of different shapes and designs provides simple solutions ...
Lead AnodesDESCRIPTIONLead and lead alloy anodes are used in the electroplating process to alter the chemical and physical properties of metallic surfaces, depending on the application for which they are destined. For example, these types of anodes are commonly used in the chrome plating process, increasing the hardness of an object, or piece of equipment, thereby improving resistance to corrosion and preventing premature wear.PreciseHeater offers a wide range of high quality, non-sacrificial lead and lead alloy electroplating anodes, for light and heavy duty requirements. An area of expertise for us, we custom manufacture to client specifications, using only high purity metals of consistent quality. Contact the professionals at PreciseHeater to discuss your needs.APPLICATIONSElectroplatin...
ASTM Electroplating Anodes Iridium Coated Titanium Anode Trivalent Chromium Plating AnodeTrivalent Chromium Plating Application and processCompared with hexavalent chromium plating, trivalent chromium plating is environmentally friendly, which makes the demand for trivalent chromium plating increase year by year. In the process of trivalent chromium plating, it is very important to prevent the oxidation of Cr3+ to Cr6+ and avoid pollution to bath solution. Traditional lead-base alloy anode or graphite anode is not suitable for trivalent chromium plating due to its high oxygen evolution potential. The titanium anode with iridium mixed metal oxide coating has low oxygen evolution potential, which effectively inhibits the oxidation of Cr3+ and ensures the stability of the plating solutio...
Anode BagsPrecise Heater have been making high-quality anode bags for the electroplating industry for over 30 years. During that time we have strived to provide the highest quality anode bags quickly and economically. We can help with any special requests, troubleshoot problems and provide solutions.Anodes and baskets should be fitted with bags to prevent metal fines or metal residues from entering the electroplating solution. Poly nap and Polypropylene are widely used for anode bag because of its durability. However, other fabrics including cotton and other synthetics are also used successfully. We carry a complete line of materials for quick delivery.Anode Bags that Keep sludge in the bag…not in your bath! Almost all electroplating solutions require anode bags; chances are we’ve already ...
Polypropylene Cartridge Filter Chambers 2012SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber12 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Grid Steam Immersion CoilsPreciseHeater manufactures, Heating tank coils, Grid Steam coils & Serpentine Coils in many different sizes and shape to meet your specific needs.PTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys available.Heating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on speci...
48'' 18KW 48 watts per sq. inch Flange Heater48 inch, 18kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Total254StripPage15/22HomePrev...  10111213141516171819...NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务