Products Products
Products / Products
Release Time: 2002 - 05 - 09
Plating Tank LinersPreciseHeater is an industry leader in the design and distribution of custom plating tanks.Plating TanksPlating tanks are constructed of a high-impact co-polymer polypropylene. Polypropylene is a rugged material that will not delaminate or embrittle when exposed to aggressive chemicals.We manufacture plastic tanks for a variety for surface finishing applications, including pickling, galvanizing, anodizing, cleaning, and electroplating tanks.Capabilities OverviewPreciseHeater has the ability to fabricate custom tanks of any size & specification. Tanks are equipped with vertical or horizontal steel encapsulated in polypropylene for external structural support.The following features are available upon request:Heat ExchangersThreaded or Flanged NozzlesInte...
Release Time: 2001 - 05 - 09
33' 12KW 48 watts per sq. inch Flange Heater33 inch, 12KW, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Release Time: 2001 - 05 - 07
Two Elements Screw Plug HeaterFeatures & Values3⁄4  For use in most aqueous alkaline solutions and rinsetanks. Check solution recommendation chart withyour chemical supplier for proper sheath materialselection 3⁄4  Heavy wall metal sheaths and screwplug in 316stainless steel and titanium 3⁄4  Watt densities up to 45-55 watts per square inch for316 Stainless steel and  3⁄4  Vapor tight, flame retardant PVC enclousre 3⁄4  Temperature and level controls sized to match the heater 3⁄4  Lower watt densities for highly viscous solutions
Release Time: 2000 - 11 - 12
Titanium Shell & Tube Heat ExchangersOur titanium heat exchangers are fully constructed with titanium shell and corrugated titanium interior tubes, ensuring adequate turbulence and avoiding inefficient laminar flows. Our titanium shell and tube heat exchangers come in a wide range of cooling and heating capacities, from 1 Ton to 25 Ton cooling and 4 Ton to 375 Ton heating! These units can be used with a boiler for heating as well as glycol chillers or geothermal systems for cooling. These units provide the best combination of affordability, reliability, and efficiency in the industry today. These heat exchangers can be installed a number of ways to provide optimal heating and/or cooling for many applications. There are few wrong answers with installation, but reaching optimal heat...
Release Time: 1996 - 05 - 16
Serpentine Immersion CoilsSerpentine Coils can be a simple “ U” shape, 4 pass, 6 pass or if need be 8 Pass Coil. These come in 316 or Titanium.  They can be made with other materials check with factory on special Applications.Heating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel andTitanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.Grid Steam CoilsTitan Industrial Heating Systems manufactures, Heating tank coils, Grid Steam coils & Serpent...
Release Time: 1996 - 05 - 13
Immersion CoilsPreciseHeater supplies immersion coils in many different configurations to meet the specific needs of the industry. Grid coils are used to achieve the maximum heat transfer area in the least amount of dimensional space. Serpentine and 'U' coils are used in situations were smaller heat transfer requirements are needed.Available Materials Of Construction:TitaniumStainless SteelZirconiumTantalumNiobiumStandard Immersion Coil Features:1' O.D. Titanium TubingVarious Mounting Options AvailableSupport Braces Between Riser Tubes for Coil StrengthAll Styles Equipped for Water or Steam ServicePressure tested at 100 PSIG100% Inert Gas Purged Welds5-Year WarrantyStandard Immersion Coil Options:Hanger StrapsAnti-Flotation ArmsSolution Level JacketsHorizontal or Vertical Orien...
Release Time: 2016 - 08 - 02
TiCu CladTitanium clad copperTitanium Clad Copper Bus Bar :TiCu Clad – titanium Clad bars are made by using compound extrusion presses which ensures an optimal metallurgical bond between the copper core and the titanium coating.The TiCu Clad material is generally used in electrochemistry, in chlor-alkaline electrolysis, in galvanizing lines, in chromium-plating baths and wherever high corrosion protection and high current-carrying capacities are required.ApplicationsDimensionally stable anode in chlor-alkaline-electrolysisBusbars for supplying current in elecctro-zinc coating lines for strip productsBusbars for supplying current in galvanizing lines for steel stripsBusbars for supplying current in continuous coating lines for wire, tube and strip platingBusbars for supplying current in gal...
Release Time: 2016 - 07 - 21
Temperature Controls (Heating Control System)Temperature ControllersCombination ControlDual Set-Point, 20 - 125 ampsProvides precise digital control for consistent plating and etch rates in most aqueous processes. Combination control features .3 inch (7.6mm), dual LED displays. Fluoropolymer (FEP) covered 10-foot 3m), 1000-ohm platinum RTD sensor included standard with the control. NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware. Dual setpoint with heating and cooling up to 30 amps. 120-240 volts. Single phase. Adjustable temperature range from -328°F (-200°C) to 4208°F (2320°C).Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrat...
Release Time: 2016 - 07 - 21
Custom Grid Coils & Heat exchangers Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solutions and rinse tanks. Custom designed to your specifications. Heavy wall, 18-20 gauge tubing available in 316 stainless steel, and titanium. Single point connections reduce the potential for leaks and simplify installation.100 PSI working pressure (steam or water).
Products Inline Chemical Heater
Temperature Protectors1, 2, and 3 Series ProtectorsThermal overload protectionThe Protector 1 overtemperature control system utilizes a heat sensitive fuse to detect overheat conditions. The protector, placed inside a thermowell, positioned in contact with the heater sheath, will cut power to the heater in the event of low liquid The Protector 2 and Protector 3 systems provide the same reliable overtemperature protection as Protector 1 However, the control systems feature a heat sensing thermostat. If the liquid level drops and the heater reaches a preset overheat heater can quickly be made operational by pushing the reset button on the control to restore power. Protector 3 is designed for flexible lead or high temperature fluoropolymer (PTFE) heater applications only.
ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTATDescriptionImmersion heater element kits which include heater enclosure and digital thermostat with temperature probe.    Immersion Heater with Digital Thermostat      Single phase power supply connectionLow heat density, ideal for heating used/waste vegetable oils.Digital temperature controller2' BSP fittingThermocouple integrated into the elementThese heating elements are specifically designed with a low heat density. This means while the output of the heater element is still 800W or 2400W the surface of the element does not get as hot as other elements. This helps prevent degradation of the fluid being heated. Having a low heat density makes these heaters ideal for heating biodiesel and vegetable oil...
Horizontal Pumps 10000 - 40000 L/HHorizontal Pumps10000 - 40000 L/HTypical applications• Hazardous and toxic solutions• Acids, alkalines and other corrosive liquids• Plating, pre- and post-treatment solutionsFeatures• Magnetic coupled, sealless providing maximum safety• High power Neodymium rare-earth magnets • Increased efficiency by incorporated vortex chamber• Robust structure providing reliable and secure   performance• Highly durable PP allowing temperatures up to 80˚C• Standard with GF union connetions with a choice of   sockets• Modular design for easy and low cost maintenance• Quality fasteners out of passivated Stainless Steel• European made motor with acid resistant 70 µm 2C PU   coating Options• Hose adapters or flanges• Priming chamb...
3 Phase Over the Side Nine Element Fluoropolymer (PTFE) Heaters: WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480230(9)430(17)9HXP32179HXP3417   28  (13)4500240480380(15)585(23)9HXP4.52239HXP4.5423    33  (15)6000240480535(21)735(29)9HXP62299HXP6429   36 (16.5)9000240480710(28)890(35)9HXP92359HXP9435    40   (18)12000240480965(38)1195(47)9HXP122479HXP12447     49   (22.5)150002404801195(47)1500(59)9HXP152599HXP15459    60   (27.5)180002404801400(55)1725(68)9HXP182689HXP18468    67   (30.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 ...
Three Elements Stainless steel Heater-Plating Immersion HeatersWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480280(11)430(17)3HSP32173HSP3417   9  (4)4500240480405(16)585(23)3HSP4.52233HSP4.5423  10  (4.5)7500240480535(21)735(29)3HSP7.52293HSP7.5429   12   (5.5)10500240480660(26)865(34)3HSP10.52343HSP10.5434   14   (6.5)PRODUCT DESCRIPTIONDurable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 40 watts/square inch (6.2 w/cm²).Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.Grounded construction and built in t...
Triple Tubes Metal Immersion Heater for Deep Tank304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)485(19)3LVSP32133LVSP34133LVTP32133LVTP3413 30 (14)6000240480430(17)940(37)3LVSP62173LVSP64173LVTP62173LVTP6417 33 (15)9000240480560(22)940(37)3LVSP92223LVSP94223LVTP92223LVTP9422 36(16.5)12000240480660(26)940(37)3LVSP122263LVSP124263LVTP122263LVTP12426 39 (18)15000240480790(31)940(37)3LVSP152313LVSP154313LVTP152313LVTP15431 42 (19)18000240480915(36)1270(50)3LVSP182363LVSP184363LVTP182363LVTP18436 45 (20.5)240002404801120(44)1270(50)3LVSP242443LVSP244443LVTP242443LVTP24444 54 (24.5)270002404801270(50)1270(50)3LVSP272503LVSP274503LVTP272503LVTP27450 60 (27.5)30000...
Flexible Heaters - Teflon HeaterFlexible by design - grounded and with flexible risersAn all-round heater! Resistant to most acids and alkalines. Max 100° C bath temperature as standard.Safe heating! Heating part deeply submersed or placed on  tank bottom.Efficient! Increased heating-up ability compared with conventional tubular heater.Space saver! Compact design and flexible riser makes it easy to install these heaters with maintained safety.Reliable duty! We guarantee positive contact between the heating element and the teflon layer. Heat is transferred directly to the bath without internal build-up, thus increasing element life.Easy maintenance! Shape of heater is simple and easy to overview and hence easy to clean.Valuable! The heating eleme...
Polypropylene Cartridge Filter Chambers 2038SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate12,960 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection3' Flange Weight2110.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Explosion-Proof Flanged Immersion HeatersPreciseHeater’s explosion-proof flanged immersion heaters are one of the most widely used solutions for heating fluids and gases in hazardous locations.  CSA approved for Class 1, Division 1, Group B, C and D locations and/or approved for ATEX and IECEx Zone 1 and/or Zone 21 locations.  PreciseHeater's explosion-proof flange heaters are designed for use in tanks, vessels, and in-line heating.Product HighlightsWattages up to 8.5 megawattsWatt densities up to 200 w/in2Voltages up to 600VElement sheath temperatures up to 1,500°FMultiple flange and element materialsFlange sizes up to 30' and 2500# ASME B16.5Standard Construction FeaturesANSI B16.5 150# or 300# flange 3' up to 30' (max flange size of 24' for div 1 ...
Metal-Titanium PartsDescriptions Of TitaniumCompared to other metals, titanium is a lustrous and silver transition metal with low density and high corrosion resistance to sea water, aqua regia and chlorine, etc. Titanium is alloyed with aluminum, manganese, iron, molybdenum and other metals to increase strength, to withstand high temperatures, and to lighten the resultant alloy.Advanced Refractory Metals is a leading supplier of titanium products. We offer low pricing and great lead times on all our materials, and we’re capable of supplying custom materials per any specs/drawings you provide us with.List Of Our Titanium ProductsTitanium Wire (diameter)0.050 mm0.063 mm0.080 mm0.10 mm0.125 mm0.16 mm0.20 mm0.25 mm0.32 mm0.40 mm0.50 mm0.63 mm0.80 mm1.0 mm1.60 mmTitanium Rod ...
62' 25KW 48 watts per sq. inch Flange Heater62 inch, 25kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 or 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
78' 30KW 48 watts per sq. inch Flange Heater78 inch, 30kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 or 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Total222StripPage17/19HomePrev...  10111213141516171819NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务