Products Products
Products / Products
Release Time: 2001 - 04 - 27
Ceramic Heating Elements/Porcelain Immersion HeaterCERAMIC HEATING ELEMENTSCeramic elements are used for indirect heating of liquids in electrical water heaters, boilers, oil pre-heaters and industrial baths.For these applications the ceramic element is mounted in a tube.Ceramic heating elements are preferred when the exchange of elements without emptying the tube or container is required.The elements are also used in applications with demand for reduced lime or coke formation, and when increased wall thickness of the tube due to heavy pressure stresses is required.Features of heating tube radiant tubeManufacture of seamless cold-drawn heat-resistant steel pipes (with a maximum temperature of 1200 degrees) with high-quality raw materialsInner core adopts resistance wire U-shaped axial arr...
Release Time: 1992 - 06 - 09
Titanium ForgingApart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSize   Titanium Flange   ASME B16.5  GR1, GR2, GR3,GR4, GR5, GR7, GR9, GR12, GR16, GR17, GR23, Ti-6Al-4V ELI, Ti-3-8-6-4-4, Ti-6-2-4-2, Ti-6-6-2, Ti-5-2.5, Ti-15-3-3-3, etc. Type: SORF, BLIND, RFWN, etc.Size: NPS1/2”- NPS48”Thickness: Sch5s-Sch80Pressure: CL150, CL300, CL400, CL600, CL900, CL1500, CL2500We supply titanium forging such as:Titanium ringsTitanium discsTitanium flangesTitanium shaftsTitanium Rings:Including titanium seamless ro...
Release Time: 1992 - 05 - 06
Custom Plating TankFor more than 30 years PreciseHeater has specialized in the design, fabrication, and installation of plastic tanks. Our plastic tanks are designed and built in accordance with DVS standards created by the German Welding Society.PreciseHeater has the ability to fabricate plastic tanks of any size, shape, and material. Our versatile manufacturing capabilities make it possible for us to accommodate the needs of each customer.Thermoplastic/FRP Dual-Laminate TanksFor many tank applications the corrosion resistance of thermoplastics is required along with the structural strength of fiberglass. For these applications the best solution often is to utilize a dual-laminate tank construction.Dual laminate is a hybrid system made of fiberglass FRP structure outside and speciali...
Release Time: 2021 - 04 - 12
Horizontal Filter Pumps Horizontal Filter Pumps 5000 - 18000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or   pleated bag• All PP or PVDF construction• Max. temperature PP 80˚C / PVDF 100˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing   and priming• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch,   lead without plug, pressure gauge, air release and   drain valveOptions• Hose connection• Dry run protection• By ...
Release Time: 2021 - 04 - 07
TiCu Clad anodeThe illustration shows the manufacturing process of titanium clad copper bars.The quality of clad materials can be demonstrated with a torsion test,. During this test strips of the material are taken out of the bond zone and twisted around their own axis several times. Clad materials of high quality must not demonstrate any separation of material after the test.  TiCu Clad is a metallurgical clad material of high quality where no impairment of the bonding materials will occur.Further processingThe clad material is so strong that the clad titanium can be welded with other titanium components by tungsten-inert gas welding (TIG-welding), laser or spot welding without damaging the compound.ConnectionsThe professional connection to the power supply is a constantly recurring ...
Release Time: 2021 - 04 - 02
Horizontal Pumps 7500 - 30000 L/HHorizontal Pumps7500 - 30000 L/HTypical applications• Ideal for abrasive solutions or those that contain   ferrous particles• Suitable for most plating solutions• Not suitable for electroless nickelFeatures• Mechanical seal material depends on application• Traditionally cost effective to purchase and maintain• Standard with GF union connetions with a choice of   sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F• Motor with two component Polyurethane coating for   excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection
Release Time: 2021 - 04 - 02
Horizontal Pumps 10000 - 30000 L/HHorizontal Pumps10000 - 30000 L/HTypical applicationsIdeal for clean or slightly contaminated acids and alkalinesSuitable for most plating solutionsNot suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeaturesMagnetic driveSealless, therefore leakfree Provide extra safety factor for agressive and expensive liquidsStandard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVCtemp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚FMotor with two component Polyurethane coating for excellent chemical resistanceOptionsHose adaptersFlangesPriming chamberDry run protection
Release Time: 2016 - 07 - 13
3 Phase Over the SideFluoropolymer PTFE Six Element Over the Side Heater :WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg2000120240480230(9)430(17)6HXP21176HXP22176HXP2417   10  (4.5)3000120240380(15)585(23)6HXP32236HXP3423    19  (8.5)4000240480535(21)735(29)6HXP42296HXP4429   22   (10)6000240480710(28)890(35)6HXP62356HXP6435   24   (11)8000240480965(38)1195(47)6HXP82476HXP8447   27   (12.5)100002404801195(47)1500(59)6HXP102596HXP10459   33   (15)120002404801400(55)1725(68)6HXP122686HXP12468    45   (20.5)PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 stainless el...
Release Time: 2008 - 05 - 09
Titanium Anodizing RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks on the job wil...
Products DC Power Suppliers Rectifier
Industrial Immersion Heaters - Fluoropolymer HeaterHigh performance,non-corrodable electrictank heater The Popular is manufactured from high integrityfluoropolymers to give best protection againstdeterioration and to give high performance incorrosive solutions.Now available - fitted to orderOTP: Protect your plant from catastrophic heater failure.Switches the heater off if the element gets too hot.HPD: Protect your heater from low level failure.Simple conductive level device built into the heater. The element has an open construction to allow free flow of liquid across the surface and to limit solidretention, which is particularly important when used in solutions which generate solid deposition suchas electroless nickel and copper plating processes.The heater is thin enough to fi...
PFA coated Electric Immersion HeaterOur immersion heaters consist of a stainless steel heating element encapsulated  with a MoldflonTM-PFA  tube using a unique process which minimizes air inclusion and improves thermal efficiency. The connecting harness consists of electrical cables which are wrapped together with a PTFE film and then shrouded in a PolytetraflonTM-PTFE outer shell which can be hermetically sealed to the tank using a suitable bulk-head fitting.  The combination of materials used  provide a thermally stable interconnecting system suitable for use in a wide range of applications and process temperatures.The heater head is machined from solid PolytetraflonTM-PTFE without any mechanical connections. The heater tubes and connecting harness are welded in place...
Teflon Tubular HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 304 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 230 V2 for 3 phase 230 V3 for 3 phase 400 V4 for 1 phase 240 V5 for 3 phase 415 VWattsSurface RatingHot zoneOverallPTE60010+V1000 W2,1 W/cm²460 mm570 mmPTE80018+V1800 W2,3 W/cm²610 mm780 mmPTE10022+V2200 W2,0 W/cm²780 mm980 mmPTE12528+V2800 W2,0 W/cm²900 mm1210 mmPTE15033+V3300 W2,2 W/cm²1150 mm1470 mm
Total219StripPage19/19HomePrev...  10111213141516171819NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务