Teflon(Fluoroplastic) Immersion Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80)XC-40-3483.51 FNPT39...
Sepentina Metal Immersion Coils ExchangersSerpentine Series, 316 Stainless & Titanium Immersion CoilDesigned for the high demands of corrosive chemical heating or cooling.LengthIn./(mm)Model NumberCoils DepthInchSquare FeetSHIP WTLBS./(Kg)24(610)SPP4-24362.7510(4.5)36(915)SPP4-36363.7512(5.5)48(1220)SPP4-48364.7514(6.5)60(1525)SPP4-60365.7516(7.5)78(1980)SPP4-78367.2520(9)96(2440)SPP4-96368.7524(11) LengthIn./(mm)Model NumberCoils DepthInchSquare FeetSHIP WTLBS./(Kg)20(510)SPP6-20483.7512(5.5)30(760)SPP6-30485.0014(6.5)40(1015)SPP6-40486.2517(8)50(1270)SPP6-50487.5020(9)60(1525)SPP6-60488.7524(11)70(1780)SPP6-704810.0027(12.5) PRODUCT DESCRIPTIONDesigned for the high demands of corrosive chemical heating or cooling.FEATURESHeavy wall, 20-gauge metal tubing available in steel,...
SmartOne PTC Max Single Bottom Heater:SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications.WATTSVOLTSHOTZONEMM/IN.RISERMM/IN.304SS316SSTITANIUMShip Wt.Lbs./Kg1000120240330(13)381(15)S1LSP1113S1LSP1213S1LTP1113S1LTP121310(4.5)2000240480430(17)483(19)S1LSP2217S1LSP2417S1LTP2217S1LTP241711(5)3000240480585(23)635(25)S1LSP3223S1LSP3423S1LTP3223S1LTP342312(5.5)4000240480735(29)635(25)S1LSP4229S1LSP4429S1LTP4229S1LTP442913(6)5000240480890(35)940(37)S1LSP5235S1LSP5435S1LTP5235S1LTP543514(6.5)60002404801041(40)1270(50)S1LSP6240S1LSP6440S1LTP6240S1LTP64401...
3 Phase Bottom HeaterFluoropolymer PTFE Three Element L Shaped Heater:WATTSVOLTSWidthmm/in Pad Lengthmm/inRisermm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg3000240480203(8)330(13)460(18)915(36)3HXOLP3208-13-R3HXOLP3408-13-R 20 (9.1)4500240480263(10.5)280(11)460(18)890(35)3HXOLP4.5210.5-11-R3HXOLP4.5410.5-11-R 21 (9.5)6000240480263(10.5)485(19)460(18)890(35)3HXOLP6210.5-19-R3HXOLP6410.5-19-R 22 (10)9000240480263(10.5)585(23)460(18)890(35)3HXOLP9210.5-23-R3HXOLP9410.5-23-R 36 (16.3)12000240480263(10.5)760(30)460(18)890(35)3HXOLP12210.5-30-R3HXOLP12410.5-30-R 42 (19.1)15000240480263(10.5)915(36)460(18)790(31)3HXOLP15210.5-36-R3HXOLP15410.5-36-R...
L-Shaped Metal Immersion Heaters: 304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1000120240330(13)380(15)LSP1113LSP1213LTP1113LTP1213 10 (4.5)2000120240480430(17)485(19)LSP2117LSP2217LSP2417LTP2117LTP2217LTP2417 11 (5)3000240480560(22)635(25)LSP3222LSP3422LTP3222LTP3422 12 (5.5)4000240480660(26)635(25)LSP4226LSP4426LTP4226LTP4426 13 (6)5000240480790(31)940(37)LSP5231LSP5431LTP5231LTP5431 14 (6.5)6000240480915(36)1270(50)LSP6236LSP6436LTP6236LTP6436 15 (7)80002404801120(44)1270(50)LSP8244LSP8444LTP8244LTP8444 18 (8)90002404801270(50)1270(50)LSP9250LSP9450LTP9250LTP9450 20 (9)100002404801400(55)1270(50)LSP10255LSP10455LTP10255LTP10455 22 (10)12...
Derated Single L Shaped Metal Bottom Heater Derated Single L Shaped Metal Bottom Heater:Durable, efficient chemical heater. Available in Steel, 304 Stainless Steel, 316 Stainless Steel, and Titanium. FEATURESFor use in most aqueous alkaline solutions, plating and phosphatetanks. Check solution recommendation chart with your chemicalsupplier for proper sheath material selection.Heavy wall metal sheaths available in: steel, 304 stainlesss steel,316 stainless steel, titanium.Watt densities up to 18 watts per square inch (2.7 w/cm2) ensurelong service life.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid tight conduit.Temperature and level controls sized to match the heater.Lower watt densities for highly viscous solutions. 304...
DC Rectifiers 30V10AOutput power: max. 100 Watt DC current: max. 10A (at 10V)DC voltage: max. 30V (at 3A) Typical applications: Laboratory plating lines Precious metal plating: Reel-to-reel platingPCB lines:Manual plating lines DC power supply with switch mode technology, designed forfor installation into cabinet. Black anodized Aluminium housing, protection grade IP20DC connector pluggableMains supply pluggableControl terminal via RJ45Optionally the rectifier can also be installed in to a 3U/HE rack Characteristic valuesLinearity inaccuracy:- for amperage Ripple less than Mains supply: 230 V +/- 10 % / 50-60 Hz(other voltage on request)CoolingAir cooled, convection coolingAmbient temperature 5 - 40°C DisplayStatus-LED, Blink...
Three phase Control PanelAll plastic design for a perfect usein surface treatment plants andchemicals storage areas DescriptionGalvabox 5T15-3 Control Panel, Three phasesCompact, simple to use, ready to plugDigital displayIP55A simple solution for regulation: this PID digital display control box (with input PT100 3 wires) controls up to 15 kW 400V three-phases, 50/60 Hz.Galvabox 5T15-3On-off switch with indicator light on the front.Five cable-glands for: box supply, immersion heater, PT100 probe, level security and thermal security.Accessories and OptionsPT100 3 WIRES PROBESCompact and ready to plug the galvabox range is simple to use.Digital display of set point temperature as well as temperature measured for an efficient control.The control box includes a plug-in terminal which cent...
PTFE & PVDF & PFA Ultra-Pure In-Line Fluid HeatersC series Heaters for Aggressive Acids & ChemicalsHC Series in-line heaters are ideal for high-temperature, ultrapure processes. They feature PFA flow paths for optimal compatibility with aggressive chemicals. Their special internal fittings eliminate O-rings seals for enhanced cleanliness. HC heaters utilize the low-mass PreciseHeater® heating element with low watt density to provide fast, powerful temperature response.Features & Benefits• Ultrapure PFA wetted surfaces for optimal chemical compatibility• Specialty fittings eliminate wetted O-rings to enhance cleanliness and reduce potential for leaks• Fast, powerful temperature response from low-mass heating element with low watt density• Up to 120°C at 60 psi• 1-1...
3HS Series, 3 Element Stainless Steel HeatersOver the side, durable, efficient, 3 element, tubular chemical heater. Available in Steel, 304 Stainless Steel, 316 Stainless Steel, and Titanium. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Three phase. Three phase. 3000-10500 watts, 200- 600 volts.FEATURESFor use in most aqueous alkaline solutions and rinse tanks. Checksolution recommendation chart with your chemical supplier forproper sheath material selection.Heavy wall metal sheaths available in: steel, 304 stainless steel,316 stainless steel, titanium.Watt densities up to 40 watts per square inch (6.2 w/cm2) ensurelong service life.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid t...
Titanium Clad Copper Bar/ Tube/ WireApplications:DesalinationWater TreatmentPower GenerationChemical ProcessingOur Products of Clading Copper with Titanium and Zirconium are as follow:Titanium Clad Copper RodZirconium Clad Copper RodTitaniun Clad Copper WireTitanium(Zirconium) Clad Copper Round RodTitanium (Zirconium) Clad Copper Rectangle BarTitanium Clad Copper Tube
Teflon Immersion Coils ExchangerFeatures & Values3⁄4 All wetted parts of fluoropolymer (FEP, PFA or PTFE)construction with a heavy duty CPVC mountingbracket.3⁄4 Heavy wall tubing improves circulation and minimizespressure drop. Larger coils constructed of 1/2 inch(13mm) tubing, smaller coils have 1/4 inch (7mm)tubing.3⁄4 Integral inlet and outlet manifolds for single pointconnections greatly reduce the potential for leaks andsimplify installation.3⁄4 Eliminates stray currents in the tank. SpecificationsSizes 5.5 ft2 to 120 ft2 exchange areaPressure Standard coils: FEP up to 30 PSIsteam pressurePFA (Perfluoroakoxy resin) up to 60P...