Products Products
Products / Products
Release Time: 2010 - 05 - 21
Inline Fluid Heater 0.4MPA Pressure DI Water HeatersDI Fluid Water Heaters for Semiconductor Manufacturing Process ModelPWH-24iPWH-48i PWH-72iPWH-96iPWH-144iHeating methodRadiation heating with near infrared raysHeater wattage24kW48kW72kW96kW144kWStandardflowrat(e at55°C)6l/min12l/min18l/min24l/min36l/minMinimum heating flow rate2l/min5l/min10l/minTemperature setting range25 to 85°CTemperature control accuracy±1°C ※1Flow meter indication range0 to 10l/min0to50l/min(. Nottheguaranteedrangeoftemperaturecontrolaccuracy)Allowable DI-Water pressure0.4MP(a Reliefpressure:0.35MPa)HeaterHalogen lamp. Indirect heating without direct contact with waterHeating vessels materialHigh-purity transparent quartzWetted materials of the pipingFluorocarbon polymerSafety functions...
Release Time: 2006 - 04 - 28
Temperature Control PanelsTemperature Control panels are used to maintain the stability and the heat transfer efficiency of the heating system to prevent issues such as overheating and chemical disintegrations of a fluid. In order to provide the precise safety mechanism of the heating system.Temperature Control panels can also be entirely customized to meet most of the requirements of the target application. There are a variety of terminal boxes available to select depending on the protection for: moisture, explosion, waterproof, and dustproof. A NEMA 1 standard terminal box is normally suitable for non-hazardous area operation. NEMA 4 terminal boxes (weather resistant enclosure) are commonly used for outdoor operation, which requires protection against moisture and humidity. Dig...
Release Time: 2006 - 04 - 19
Finned Tubular HeatersFinned tubular heaters are custom-made to fit your application, and are designed for applications where tubular heaters are exposed to forced convection. Placing fins around tubular heaters increases their surface area and improves heat transferring capacity. Finned tubular heaters, compared to regular tubular heaters, run at lower surface temperatures for the same watt densities when placed in identical air streams. Finned tubular heaters are built to order due to individual application requirementApplicationsDryers Recirculation ovens Fan-forced heaters Heat treating and annealingGraph 1 compares watt density, outlet air temperature, and the speed of air flow for regular and finned tubular heaters. Finned tubular heaters are not recommended for applic...
Release Time: 2006 - 04 - 16
Small Tank Electric Immersion HeaterThe chemicals in your treatmentliquids demand the utmost of thechemical resistance of the materialsused. When choosing the materi-als the physical processes (possibleencrustment) and thermal limits(surface power density) have to betaken equally into consideration.The advantages and disadvantagesof the individual materials are il-lustrated in the chemical resistancelist. The following table gives anoverview of the standard typesavailable. The specific surface powerdensity for the immersion heatertube is stated in W / cm2 accordingto the minimum immersion depthand the rated power. Immersion Tube Material SpecificationsPS 28 Special hard porcelain, glazedTG 28 Technical glass (hydrolytic class1,acid class 1, alkaline class 2according to DIN 12111,12116...
Release Time: 2001 - 05 - 08
20' 7.5KW 48 watts per sq. inch Flange Heater20 inch, 7.5kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Release Time: 1996 - 05 - 30
Titanium Bar/RodApplication:Aircraft TurbinesChemical Processing IndustrialsAerospace FastenersEngine ComponentsAircraft Structural ComponentsHigh-Performance Automatic PartsSports EquipmentMarine ApplicationsMedical IndustryTitanium Bar:Specification and Standard for Titanium Bar and Its Alloys:Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSizeTitanium Bar, Forging Bar & Wire (Round, Square, Rectangle and Hexagon, etc.)ASTM B348, AMS 4928, AMS 6921, AMS 4975, AMS 4978, AMS 4966, ASTM F67, ASTM F136, ASME SB863, AWS A5.16, etc.H7/h7 toleranc...
Release Time: 2022 - 04 - 18
TIH In-line Chemical HeaterProcess fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The TIH offers unmatched performance and reliability with the ability to heat a variety of chemicalsup to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the mostdurable and long-lasting inline chemical heater available! FEATURESDesigned for Performance and SafetyHigh-temperature configuration available to heatchemicals up to 210°C Multiple plumbing layouts available to better facilitateinstallation into a variety of tool configurationsGrounded electric heating elementsRedundant temper...
Release Time: 2021 - 04 - 16
Flat-Type Industrial Immersion Heater:The Flat-Type immersion heaterhas been specifically designed foruse in applications where overallspace is restricted. The compact de-sign permits space-saving installa-tion in very narrow containers whilethe FEP sheath provides the highestlevels of chemical resistance.StructureGALMAFLON immersion heatersconsist of a high-compressed stain-less steel tubular heating elementdesigned for use in alkaline fluids.For use in acid fluids, the stainlesssteel tubular heating elements areprovided with a 1 mm thick FEPsheath. This sheath is also very well suitedfor use with highly aggressiveprocess fluids and extreme levelsof chemical pollution such as inchrome electrolytes or autocata-lytically (chemically) functioningelectrolytes.To avoid the risk of encrust...
Release Time: 2021 - 04 - 16
Electronic Temperature ControllerRelay/ControlSingle Set-Point, 30 ampsProvides precise control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Vapor tight, IP21, front panel protection, plastic enclosure with sealed tactile switches. 30 amp switching capacity for either 120 or 240 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C). ApplicationsSurface FinishingGeneral Metal Finishing (GMF)AnodizingWaste Water TreatmentAquaculture
Products Inline Chemical Heater
Double Plating Barrel UnitsBarrel Units For ElectroplatingPlating barrel machines are available in single, double barrel unit (tandem barrels) or multi barrel formsThe majority of parts are manufactured from PE1000 grade polyethylene, giving extended lifeBarrel drop arm carriers are reinforced with high tensile steel rods for greater strength and stabilityAll top frames are manufactured from type 304 or 316 stainless steel with powder coated finish as an optional extraUnique self-aligning system Barrel units are supplied in integral drive or tank drive formatsFeatures of PreciseHeater Barrel UnitsOur unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the standard “...
Platinum Titanium Anodes Because of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these specif...
Electric Immersion Heaters with Flexible RiserAPPLICATIONS: Provides simplified and versatile installation for L-shaped electric bottom heaters in various tank depths. The flex riser system saves dollars by reducing shipping costs since a parcel carrier can ship most heaters. RUGGED CONSTRUCTION: • Stainless steel heaters: braided 304 stainless steel sheath over a fluoropolymer (PTFE) inner tube.• Titanium heaters: Fluoropolymer (FEP) tube with integral 316 stainless steel reinforcement.• Fluoropolymer (PTFE) heaters: continuous extension of tubing with inline junction box. LONG LASTING PERFORMANCE: Liquid tight fluoropolymer tube is chemically inert and is protected by either a stainless steel outer braid (stainless steel heaters) or reinforced core (titanium heaters). ...
Plating Process Tanks & Tank Liner : Utilized heavily in the automotive and hardware industries,Plating process tanks are ideal for coating steel parts and electroplating. With rack and barrel inserts, our plating tanks can hold the chemicals your facility uses, along with water for rinse tanks and more. We can fabricate process tanks to your exact specifications, any size, shape and capacity you require. In addition to our excellent standard industrial warranty, we can also offer extended warranties of  3 years, 5 years and more on our plating process tanks. Custom Manufactured Tanks and Flexible PVC Tank Liners: ·  Process Tanks·  Sectioned Plastic Tanks·  Chemical Storage Tanks·  Vertical ...
Low Profile Bottom HeaterFluoropolymer HeaterHXFL Style TEFLON/PTFE/Fluoropolymer Bottom Heaters:Compatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Low profile, bottom design. Inert to most solutions with a corrosion reisistant head. Low watt density. Built-in thermal protector and grounded element. Corrosion-resistant head. Heats up to 212°F (100°C). 500-6000 watts, 120-600 volts.WATTSVOLTSHot zonemm/inRisermm/inMax coldzoneDiamm/inModel No.Ship WT.Lbs./Kg500120240125(5)305(12)915(36)125(5)HXFP.5105-14HXFP.5205-14   6  (2.5)1000120240155(6)305(12)915(36)155(6)HXFP1106-14HXFP1206-14   7  (3.5)2000120240480205(8)460(18)890(35)205(8)HXFP2108-17HXFP2208-17HXFP2408-17   8...
For Acidic SolutionsQuartz Electric Immersion Heaters: For acidic solutionsCompatible with many aggressive chemistries. Heavy wall metal element, quartz sheath and polypropylene guards (sold independently for assembly). For use in most aqueous acidic plating solutions and pickling tanks. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Single phase. Heats up to 180°F (82°C). 500-30000 watts, 120-600 volts.WATTSVOLTSHotzoneIN./MMOverallIN./MMModel No.With GuardShip Wt.LBS/Kg.5001202406(153)12(305)QMP.5112QMP.52129(4)10001202406(153)12(305)QMP1112QMP121210(4.5)10001202407(180)17(430)QMP1117QMP121711(5)200024048012(305)18(457)QMP2217QMP241711(5)200024048012(305)23(585)QMP2223QMP242314(6.5)300024048018(457)24(610)QMP...
Electric Immersion heaters are tubular heating elements used to directly heat liquids found in a variety of industries from process heating, power, chemical, oil and gas, pharmaceuticals, metals processing to the food & beverage industry.Precise Heater has over 40 years of experience in the application, design, and manufacture of robust immersion tank heaters and process assemblies for immersion heating applications.1 or 3 Phase Over the SideMetal Over-the-Side Immersion Heaters:304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1000120240155(6)280(11)RSP1111RSP1211RTP1111RTP1211 7(3.5)2000240480255(10)430(17)RSP2217RSP2417RTP2217RTP2417 10(4.5)3000240480405(16)585(23)RSP3223RSP3423RTP3223RTP3423 11 (5)4000240480510(20)735(29...
Derated Triple Metal Over the Side HeatersDerated Triple Metal Over-the-Side Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240155(6)280(11)D3SP1.5111D3SP1.5211D3TP1.5111D3TP1.5211 21(9.5)3000240480255(10)430(17)D3SP3217D3SP3417D3TP3217D3TP3417 30(14)4500240480405(16)585(23)D3SP4.5223D3SP4.5423D3TP4.5223D3TP4.5423 33 (15)6000240480510(20)735(29)D3SP6229D3SP6429D3TP6229D3TP6429 39 (18)7500240480635(25)890(35)D3SP7.5235D3SP7.5435D3TP7.5235D3TP7.5435 45 (20.5)9000240480762(30)1015(40)D3SP9240D3SP9440D3TP9240D3TP9440 51 (23)12000240480940(37)1195(47)D3SP12247D3SP12447D3TP12247D3TP12447 63(28.5)135002404801120(44)1370(54)D3SP13.5254D3SP13.5454D3TP13.5254D3TP13.5454 69...
Triple L Shaped Metal Bottom Heater  Triple Metal L-Shaped Immersion Heaters:FEATURESDurable, efficient chemical heaterBottom style, L-shaped MOTS heater with heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Three phase. Heats up to 180°F (82°C). Three phase. 3000-36000 watts, 120-600 volts.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid tight conduit.Temperature and level controls sized to match the heater.Lower watt densities for highly viscous solutions. 304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)...
Chemical Vertical Pumps Vertical Pumps1000 - 10000 L/HTypical applications• Plating - Rinsing - FiltrationFeatures• Immersion length series D90 270mm / D120 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Hose connection
Electro Plating BarrelsWhy You Need High Quality Electro Plating BarrelsProduct entrapment can lead to plating errors, resulting in thousands of scrapped components in a 100 litre barrel. Eagle electro plating barrels eliminate any plating problems which might lead to production wastage through incorrect plating. Our design and precision engineering processes ensure excellent quality plating barrels for consistent plating results.Design: Design innovation award winners our Engineering have designed electro plating barrels for a variety of plating processes, working closely with clients and using the latest 3D cad design technology for our designs. Our unique self-aligning system, with bottom beams at 30° incline for exact positioning. This ensures good contacts for main power supply a...
Titanium Cartridge Filter (Standard Core Type 1)Many special treatments such as electroplating,chemical agents, and eelectrolysis involve corrosive materials.In response to the needs of different industries,titanium is used to make corrosion resistant filters.Pressure resistant. Suitable for filtering of various chemcial fluids.High filtration rate and durable. There have a rod inside for fixing on the filter. Filter effects guaranteed.Filter specification/entry and exit locations can be made according to the solution and installation need.For the production of pure titanium material, corrosion resistance, this kind of filter is small in size, light weight, convenient use, large filtering area, low block rate, filtering speed, no pollution, thermal dilute stability and chemical stabil...
Total259StripPage6/22HomePrev12345678910...NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务