Products Products
Products / Products
Release Time: 2021 - 04 - 16
Electronic Temperature ControllerRelay/ControlSingle Set-Point, 30 ampsProvides precise control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Vapor tight, IP21, front panel protection, plastic enclosure with sealed tactile switches. 30 amp switching capacity for either 120 or 240 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C). ApplicationsSurface FinishingGeneral Metal Finishing (GMF)AnodizingWaste Water TreatmentAquaculture
Release Time: 2021 - 04 - 09
Jigs & Clamps for Anodizing Precise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks o...
Release Time: 2021 - 03 - 24
Anode Baskets/Plating Equipment & Supplies / Anode AccessoriesDescriptionAnode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.Baskets Construction MaterialTitaniumZirconiumNiobiumStainless SteelCarbon SteelMonelStandard Styles and sizes of Anode BasketsRectangular – 2.5″ x 6″ x LengthRound – 2.5″ diameter x LengthStandard Stock Lengths Included 18″, 24″, 30″, other lengths are built to orderAll Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, MonelTECHNICAL INFORMATION:Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes in a bathMini-Expanded / ...
Release Time: 2021 - 03 - 16
Heat Exchangers - PFA, FEP, Fluoropolymer Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 F...
Release Time: 2017 - 04 - 06
Double Plating Barrel UnitsBarrel Units For ElectroplatingPlating barrel machines are available in single, double barrel unit (tandem barrels) or multi barrel formsThe majority of parts are manufactured from PE1000 grade polyethylene, giving extended lifeBarrel drop arm carriers are reinforced with high tensile steel rods for greater strength and stabilityAll top frames are manufactured from type 304 or 316 stainless steel with powder coated finish as an optional extraUnique self-aligning system Barrel units are supplied in integral drive or tank drive formatsFeatures of PreciseHeater Barrel UnitsOur unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the standard “...
Release Time: 2016 - 07 - 27
Platinum Titanium Anodes Because of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these specif...
Release Time: 2016 - 07 - 21
Electric Immersion Heaters with Flexible RiserAPPLICATIONS: Provides simplified and versatile installation for L-shaped electric bottom heaters in various tank depths. The flex riser system saves dollars by reducing shipping costs since a parcel carrier can ship most heaters. RUGGED CONSTRUCTION: • Stainless steel heaters: braided 304 stainless steel sheath over a fluoropolymer (PTFE) inner tube.• Titanium heaters: Fluoropolymer (FEP) tube with integral 316 stainless steel reinforcement.• Fluoropolymer (PTFE) heaters: continuous extension of tubing with inline junction box. LONG LASTING PERFORMANCE: Liquid tight fluoropolymer tube is chemically inert and is protected by either a stainless steel outer braid (stainless steel heaters) or reinforced core (titanium heaters). ...
Release Time: 2016 - 07 - 21
Plating Process Tanks & Tank Liner : Utilized heavily in the automotive and hardware industries,Plating process tanks are ideal for coating steel parts and electroplating. With rack and barrel inserts, our plating tanks can hold the chemicals your facility uses, along with water for rinse tanks and more. We can fabricate process tanks to your exact specifications, any size, shape and capacity you require. In addition to our excellent standard industrial warranty, we can also offer extended warranties of  3 years, 5 years and more on our plating process tanks. Custom Manufactured Tanks and Flexible PVC Tank Liners: ·  Process Tanks·  Sectioned Plastic Tanks·  Chemical Storage Tanks·  Vertical ...
Release Time: 2016 - 07 - 21
Double C Grid Coil ExchangersThe DCG Series Exchanger is one of two NEW INNOVATIVE DESIGNS offered by PH. This dual footprint design offer superior performance for use in heating and cooling applications where space is an issue.DG (Grid) C Series CoilDurable, low-profile designDesigned for the high demands of corrosive chemical heating or cooling for larger tanks and greater efficiency. Durable, low profile design. Every inch of coil surface is active exchange area. Check solution guide or consult with your chemical supplier for proper sheath material. Heavy wall, 20-gauge metal tubing available in steel, 316 stainless steel and titanium.  These unique C-shape tube grids require a substantially smaller footprint to adequately heat or cool a given exchange area. They can...
Products Chemical Vertical Pumps
Electro Plating BarrelsWhy You Need High Quality Electro Plating BarrelsProduct entrapment can lead to plating errors, resulting in thousands of scrapped components in a 100 litre barrel. Eagle electro plating barrels eliminate any plating problems which might lead to production wastage through incorrect plating. Our design and precision engineering processes ensure excellent quality plating barrels for consistent plating results.Design: Design innovation award winners our Engineering have designed electro plating barrels for a variety of plating processes, working closely with clients and using the latest 3D cad design technology for our designs. Our unique self-aligning system, with bottom beams at 30° incline for exact positioning. This ensures good contacts for main power supply a...
Titanium Cartridge Filter (Standard Core Type 1)Many special treatments such as electroplating,chemical agents, and eelectrolysis involve corrosive materials.In response to the needs of different industries,titanium is used to make corrosion resistant filters.Pressure resistant. Suitable for filtering of various chemcial fluids.High filtration rate and durable. There have a rod inside for fixing on the filter. Filter effects guaranteed.Filter specification/entry and exit locations can be made according to the solution and installation need.For the production of pure titanium material, corrosion resistance, this kind of filter is small in size, light weight, convenient use, large filtering area, low block rate, filtering speed, no pollution, thermal dilute stability and chemical stabil...
2' TUBULAR SCREW PLUG PTC HEATERSSmartOne heaters utilize Positive Temperature Coefficient (PTC) semiconductors as the heating element. Unlike traditionalheating elements, they are SELF-LIMITING. As PTC elements heat up, their resistance to electrical current increases.You may already be familiar with PTC technology as it is used in hair dryers, curling irons, and car seat heaters.FEATURES AND BENEFITSIncreased Safety   SmartOne heaters can only reach a set maximum sheath temperature which is below the  ignition point of mostcombustible materials (such as plastic tanks, see chart below).   Unlike traditional immersion heaters with external thermal protectors, the safety of thermal protection is built intothe design of the PTC chips. Therefore, it is impossible ...
IMMERSION HEAT EXCHANGERSHORIZONTAL AND VERTICAL GRID COIL EXCHANGERSApplication:Available for in tank heating and cooling applications to be used in conjunction with a boiler or chiller system for aqueous solutions. Can be used with steam/water pressures up to 100PSI.Features: Available in 20 Gauge Steel, T316 S/S and Titanium. Horizontal and vertical design. Standard 1.0' NPT connections, 1.0' diameter tubing, 2.0' headers.Special length and 'L' shaped configurations available for bottom exchange applications. Options: Riser tube length extensions, exchanger hangers, sizes up 90 sq. ft. and 720,000 BTU sizes and water connections available.Grid coil heat exchangers are designed for immersion heating and coolingapplications where coils can be installed d...
Grid Steam Immersion CoilsPreciseHeater manufactures, Heating tank coils, Grid Steam coils & Serpentine Coils in many different sizes and shape to meet your specific needs.PTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys available.Heating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on speci...
PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys are also available at PreciseHeaterHeating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel andTitanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.Grid Steam CoilsTitan Industrial Heating Systems manufactures, Heating tank coils, Grid Steam coils & Serpe...
Polypropylene Cartridge Filter Chamber 1004SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate960 gphQuantity of Filter Tubes in Chamber4 Size of Filter Tubes in ChamberMSC15P10P Max. Pressure at 72ºF140 psiInlet Connection1-1/2' Flange Outlet Connection1-1/2' Flange Weight225.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
26' 9KW 48 watts per sq. inch Flange Heater26 inch, 9kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Finned Tubular Heating ElementsFinned tubular heating elements from PreciseHeater™ are the most versatile and dependable electric heating element available today. These industrial heating solutions are among the most common heaters and are best suited for a large number of applications such as conduction, convection, and radiation. PreciseHeater™ factory-configures every tubular process heater to almost any shape or size. Custom bending diameters can be made upon request. PreciseHeater uses the finest materials in construction such as steel, stainless steel, incoloy, inconel and/or titanium alloys. PreciseHeater also uses high quality magnesium oxide to allow for efficient heat transfer from resistive coil to your heating medium whether it is air, liquid or solid.  These hea...
Horizontal Filter Pumps Horizontal Filter Pumps18000 - 34000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or   pleated bag• All PP construction• Max. temperature PP 80˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing   and priming• Unions for rigid piping (PP or CPVC sockets)• Standard with 3 phase motor, thermal overload switch,   lead without plug, pressure gauge, air release and   drain valveOptions• Hose connection• Dry run protection• By pass with flowmeter• Contact manometer• Si...
Boiler HeatersPreciseHeater offers a wide variety of process heating equipment to our customers. We manufacture boiler heaters that suit many different sizes and dimensions that customers need. If a boiler has a flanged heater that need to be replaced, PreciseHeater can replicate the model you currently have from practically any manufacturer and have your boiler system up and running in a matter of hours. Boiler heaters come in a variety of different flange sizes and lengths. The two common models are rounded flanges and square flanges. The length of the boiler heater is highly correlated to the length that is available within your boiler. If all the major variables are known (ie. Wattage, Voltage, Length and Flange size), PreciseHeater can replicate the model you have in no time.These ind...
Vertical Filter Pumps SystemVertical Filter Pumps7000 - 11000 L/HTypical applicationsPlating and process industryFeaturesEnvironmentally safe in-tank installationCompact filter systemSealless pump, can run drySelf-priming OptionsCustomised mounting plateSuction extension pipeCPVC/PVDF sockets or hose connectionBag filtersSS filter systemsOut-of-tank mounting
Total222StripPage7/19HomePrev...  234567891011...NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务