Products Products
Products / Products
Release Time: 2021 - 04 - 12
Vertical Filter Pumps SystemVertical Filter Pumps7000 - 11000 L/HTypical applicationsPlating and process industryFeaturesEnvironmentally safe in-tank installationCompact filter systemSealless pump, can run drySelf-priming OptionsCustomised mounting plateSuction extension pipeCPVC/PVDF sockets or hose connectionBag filtersSS filter systemsOut-of-tank mounting
Release Time: 2021 - 04 - 09
Anodization Treatment Plating RackPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks on t...
Release Time: 2021 - 04 - 08
Centrifugal Liquid RecyclingOur Centrifugal Separators are using the physical effect of phase separation in centrifugal fields for the cleaning of process fluids. Even unfilterable media are reliably cleared from particles or secondary liquid phases without use of disposables.The removed solids are dry and pure. Centrifugal Separators are relatively compact systems and easy to be integrated; they fit a wide range of applications.CoalescersPlate phase separators, for automatic separation of large quantities of coarse disperse foreign oils, working on the coalescence and gravitation principle.Microfilter Clear TubeOur Systems are automatically backflushing filtration systems with outstanding filtration efficiency: 1-3 µm (NAS 7/8)Central SystemsCentral Filtration Systems are t...
Release Time: 2021 - 04 - 02
Vertical Pumps 40000 - 100000 L/HVertical Pumps40000 - 100000 L/HTypical applications• Plating - Rinsing - Filtration• Waste treatment• ScrubbingFeatures• Available in PP or NPP• Immersion length 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Out-of-Tank model• Vapour lock• Strainer
Release Time: 2021 - 04 - 02
Vertical Pump 1000-12000LVertical Pumps2000 - 12000 L/H Typical applications • Plating – Rinsing – Filtration • Waste treatmentFeatures • Immersion length 300mm • Environmentally safe in-tank installation  • Free turning shaft – no seal • Self-priming – can run dry • Full length motor shaft • Suction strainer • Outlet sockets available in PP and CPVCOptions • Suction extension pipe • Hose connection
Release Time: 2021 - 03 - 31
Electric Immersion Heaters-Industrial HeatersElectric Immersion Heaters aremost suitable for direct heating ofnearly all process liquids and corres-ponding applications. Excellentchemical resistance is ensured bythe use of different immersion tubematerials and variable fitting optionshelp you to meet the individual re-quirements of heating installations.A long life span with optimum reli-ability is assured by using high qual-ity materials thereby ensuring fault-less operation of your system.Electric Immersion heater isconstructed on a modular basis andconsists of a tube, a long-life heat-ing cartridge, a terminal casing andthe lead.The Immersion Heater TubeWe can offer you the optimum ma-terial for every application. Theheated length (minimum immersiondepth) is marked by a ring which ...
Release Time: 2021 - 03 - 24
TITANIUM ANODE BASKETS AND ANODE HOOKS:Custom Anode BasketsIf your anode basket requirements call for other than standard configurations, consult with us for alternatives and custom basket possibilities.Our extensive history in custom anode basket manufacturing gives you the ability to work with directly with our equipment experts to create the exact configuration you’re looking for.Talk with us. Together we’ll find just the answer to your basket dilemma.Considerations for Basket Sizing:Baskets should be 2″ to 4″ shorter than the longest piece of work.Baskets should be 1″ above the solution level.Hook length is measured from the top of anode bar to 1″ above the solution level.Quantities for rectangular baskets should be three (3) 2 ½” x 6″ baskets for every two feet above the bar.Sizi...
Release Time: 2021 - 03 - 23
Quartz Immersion Heaters for Acidic Solutions : For acidic solutionsCompatible with many aggressive chemistries. Heavy wall metal element, quartz sheath and polypropylene guards (sold independently for assembly). For use in most aqueous acidic plating solutions and pickling tanks. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Single phase. Heats up to 180°F (82°C). 500-30000 watts, 120-600 volts.WATTSVOLTSHotzoneIN./MMOverallIN./MMModel No.With GuardShip Wt.LBS/Kg.5001202406(153)12(305)QMP.5112QMP.52129(4)10001202406(153)12(305)QMP1112QMP121210(4.5)10001202407(180)17(430)QMP1117QMP121711(5)200024048012(305)18(457)QMP2217QMP241711(5)200024048012(305)23(585)QMP2223QMP242314(6.5)300024048018(457)24(610)...
Release Time: 2021 - 03 - 16
Fluoropolymer (PTFE) Tubing Coil Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1...
Products DC Power Suppliers Rectifier
Electroless Nickel Plating Tank Systems PreciseHeater was the first seller of Electroless Nickel in China. After years of developing new procedures in Electroless Nickel Plating and its chemistry, Our team put together the ultimate “EN” plating system and named it PHISome benefits of the Preciseheater EN system are that it utilizes basic engineering and combines it with years of technical experience. We then customize our knowledge to fit your needs. Unlike our competitors, all our systems are custom built to meet YOUR facility’s requirements.Tank Size: We have designed and built tanks as small as 25 gallons up to 3000 gallons.Material: While we prefer to build our tanks with natural poly, we also have standard white poly, PVC, Titanium,PVDF and stainless...
Tanks and LinersPreciseHeater Sales offers plating tanks in Titanium,PVDF,PVC, stainless steel, polypropylene and steel, and plating tank liners in a variety of sizes and materials that prevent plating tank corrosion and provide secondary containment.Typical ApplicationsAccessories AvailablePlating TanksOverflow WeirsRinse TanksSkirtsEtching TanksStainless Steel ClipsStorage TanksSumpsConcrete SumpsDouble BottomsEarthen Pits and PondsLeak DetectorsFloor AreasPatch KitsConcrete TrenchesRigid PVCWaste Water TreatmentBatten Strips (plastic)Horizontal TanksOverflow WeirsConcrete VaultsSkirts
Detecting liquid levels with conductive Level Rod-ProbesLiquid levels in process and stor-age tanks need to be measuredand monitored, since unwantedvariations in these levels (due toevaporation or removal of the pro-cess liquids) must be corrected. Inthis respect, there are two differentgeneral tasks:• control of the level in order topermit automatic executionof process operations (such asdosing of liquids)Possible deposits of encrustationbetween the tips of the probe canbe avoided by ensuring that thedifference between the probe-rodlengths is at least 60 mm.The levels of non-conductive orpoorly conducting liquids, in whichlevel rod-probes cannot be used,can be controlled and monitored byour float switches.The level rod-probes are available inmany different versions:• with two to five rods...
Polypropylene Cartridge Filter ChambersSpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate1,920 gphQuantity of Filter Tubes in Chamber4 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection1-1/2' Flange Outlet Connection1-1/2' Flange Weight240.0 lbsManufacturerPrecise Heater 1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Quartz Immersion Heaters & Teflon (PTFE) Tank Heaters WATTSVOLTSHotzoneIN./MMOverallIN./MMModel No.With GuardShip Wt.LBS/Kg.5001202406(153)12(305)QMP.5112QMP.52129(4)10001202406(153)12(305)QMP1112QMP121210(4.5)10001202407(180)17(430)QMP1117QMP121711(5)200024048012(305)18(457)QMP2217QMP241711(5)200024048012(305)23(585)QMP2223QMP242314(6.5)300024048018(457)24(610)QMP3224QMP342414(6.5)300024048018(457)29(735)QMP3229QMP342917(8)350024048021(535)29(735)QMP3.5229QMP3.542917(8)400024048028(710)35(890)QMP4235QMP443520(9)400024048028(710)41(1040)QMP4241QMP444123(10.5)500024048033(840)41(1040)QMP5241QMP544123(10.5)500024048033(840)47(1195)QMP5247QMP544726(12)600024048039(990)47(1195)QMP6247QMP644726(12)600024048039(990)52(1320)QMP6247QMP644729(13)800024048049(1245)59(1500)QMP8259QMP845931(1...
Titanium Shell & Tube Heat ExchangersOur titanium heat exchangers are fully constructed with titanium shell and corrugated titanium interior tubes, ensuring adequate turbulence and avoiding inefficient laminar flows. Our titanium shell and tube heat exchangers come in a wide range of cooling and heating capacities, from 1 Ton to 25 Ton cooling and 4 Ton to 375 Ton heating! These units can be used with a boiler for heating as well as glycol chillers or geothermal systems for cooling. These units provide the best combination of affordability, reliability, and efficiency in the industry today. These heat exchangers can be installed a number of ways to provide optimal heating and/or cooling for many applications. There are few wrong answers with installation, but reaching optimal heat...
Titanium Tube/PipeTitanium Seamless TubeSpecification and Standard for Titanium Tubes and Its Alloys:Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSize Titanium Seamless Tube, Pipe Square Seamless Tube ASME SB338, ASME SB337, ASME SB861 AMS4943, AMS 4944, AMS 4945 GR1, GR2, GR3, GR4, GR7, GR9, GR12, GR16, GR17 OD: (0.059”-24.41”) WT: (0.0158”-0.787”) Max Length: 59 feetQuality Tests for Titanium and Titanium Alloy Tubes:Inspections and tests ensure that materials meet international standard specifications ...
Flanged Immersion HeaterImmersion HeatersOur immersion heaters has long been recognised as the most versatile and widely used source of electric, commercial, industrial, scientific and domestic heat. Our immersion heaters are used for a number of applications which include fluids, including water, oils, chemicals and more.Our industrial immersion heaters are reliable, strong, adaptable and suitable for an unlimited number of applications and environments. Elmatic has the expertise, design and manufacturing facilities to meet your particular requirements, whether it’s a large quantity requirement or a special one.Depending on the application required, these immersion heaters can be made in various types of materials including incoloy, stainless steel, mild steel and titanium. Enabling tempe...
Plating & Metal Finishing Tank LinersPreciseHeater™ custom fabricates flat sheet liners, one piece primary, and secondary containment liners for all types of applications.  We utilize various methods for welding the different materials, ranging from dielectric machines, which ensure clean fast seals on PVC based materials to automated wedge welders.All inlets, outlets, weirs, skirts and sumps are custom fabricated onto the liner, keeping the liner in one solid piece.  Several different types of materials can be used for containment for each specific chemical and operating temperature requirement.EPA regulations require secondary containment for chemical operations in many states.  Precise Heater can custom fabricate any size liner to fit inside your tank, or fabrica...
Titanium Zr Stainless Steel Anode Baskets For Electroplating And PCB Industry、DescriptionAnode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.Baskets Construction MaterialTitaniumZirconiumNiobiumStainless SteelCarbon SteelMonel  Standard Styles and sizes of Anode BasketsRectangular – 2.5″ x 6″ x LengthRound – 2.5″ diameter x LengthStandard Stock Lengths Included 18″, 24″, 30″, other lengths are built to orderAll Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, MonelTECHNICAL INFORMATION:Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes i...
Inline Chemical Heater Performs Unmatched Semiconductor Process Fluid HeatingNow heat semiconductor process fluids up to 210°C!Faster heatup: Single heater chamber sizes up to 18kW.Rapid installation: Customized plumbing connectionsLong heater life for reduced cost of ownership (COO):Patented heater gas purge system continuously removes any chemical permeation and ensures long element life.Long heater life and clean operating: Patented heater gas purge system continuously removes chemical permeation and ensures exceptionally long element life. This system also protects against any potential ionic contamination of the chemistry.Rugged construction: Thick walled chamber provides long service life in the harshest high temperature applications.Exceptionally clean perfo...
41' 15KW 48 watts per sq. inch Flange Heater41 inch, 15kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Total230StripPage9/20HomePrev...  45678910111213...NextEnd
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务