Finned Tubular HeatersFinned tubular heaters are custom-made to fit your application, and are designed for applications where tubular heaters are exposed to forced convection. Placing fins around tubular heaters increases their surface area and improves heat transferring capacity. Finned tubular heaters, compared to regular tubular heaters, run at lower surface temperatures for the same watt densities when placed in identical air streams. Finned tubular heaters are built to order due to individual application requirementApplicationsDryers Recirculation ovens Fan-forced heaters Heat treating and annealingGraph 1 compares watt density, outlet air temperature, and the speed of air flow for regular and finned tubular heaters. Finned tubular heaters are not recommended for applic...
Small Tank Electric Immersion HeaterThe chemicals in your treatmentliquids demand the utmost of thechemical resistance of the materialsused. When choosing the materi-als the physical processes (possibleencrustment) and thermal limits(surface power density) have to betaken equally into consideration.The advantages and disadvantagesof the individual materials are il-lustrated in the chemical resistancelist. The following table gives anoverview of the standard typesavailable. The specific surface powerdensity for the immersion heatertube is stated in W / cm2 accordingto the minimum immersion depthand the rated power. Immersion Tube Material SpecificationsPS 28 Special hard porcelain, glazedTG 28 Technical glass (hydrolytic class1,acid class 1, alkaline class 2according to DIN 12111,12116...
20' 7.5KW 48 watts per sq. inch Flange Heater20 inch, 7.5kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Titanium Bar/RodApplication:Aircraft TurbinesChemical Processing IndustrialsAerospace FastenersEngine ComponentsAircraft Structural ComponentsHigh-Performance Automatic PartsSports EquipmentMarine ApplicationsMedical IndustryTitanium Bar:Specification and Standard for Titanium Bar and Its Alloys:Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSizeTitanium Bar, Forging Bar & Wire (Round, Square, Rectangle and Hexagon, etc.)ASTM B348, AMS 4928, AMS 6921, AMS 4975, AMS 4978, AMS 4966, ASTM F67, ASTM F136, ASME SB863, AWS A5.16, etc.H7/h7 toleranc...
TIH In-line Chemical HeaterProcess fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The TIH offers unmatched performance and reliability with the ability to heat a variety of chemicalsup to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the mostdurable and long-lasting inline chemical heater available! FEATURESDesigned for Performance and SafetyHigh-temperature configuration available to heatchemicals up to 210°C Multiple plumbing layouts available to better facilitateinstallation into a variety of tool configurationsGrounded electric heating elementsRedundant temper...
Flat-Type Industrial Immersion Heater:The Flat-Type immersion heaterhas been specifically designed foruse in applications where overallspace is restricted. The compact de-sign permits space-saving installa-tion in very narrow containers whilethe FEP sheath provides the highestlevels of chemical resistance.StructureGALMAFLON immersion heatersconsist of a high-compressed stain-less steel tubular heating elementdesigned for use in alkaline fluids.For use in acid fluids, the stainlesssteel tubular heating elements areprovided with a 1 mm thick FEPsheath. This sheath is also very well suitedfor use with highly aggressiveprocess fluids and extreme levelsof chemical pollution such as inchrome electrolytes or autocata-lytically (chemically) functioningelectrolytes.To avoid the risk of encrust...
Electronic Temperature ControllerRelay/ControlSingle Set-Point, 30 ampsProvides precise control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Vapor tight, IP21, front panel protection, plastic enclosure with sealed tactile switches. 30 amp switching capacity for either 120 or 240 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C). ApplicationsSurface FinishingGeneral Metal Finishing (GMF)AnodizingWaste Water TreatmentAquaculture
Temperature probe with Temperature PT100 SensorsParticularly in surface treatment, theprecise measurement and control of temperatures is of decisive im-portance for the subsequent qualityof the treated items. To keep thetemperature of the liquid in storagetanks within the desired range, also prevents negative effects onthe process liquids, such as freez-ing, crystallisation and excessiveviscosity.The following functions need to beimplemented:• Control of the temperature inorder to automate process steps(such as keeping the desiredprocess temperature)• Monitoring of the temperature in order to avoid possible damageto the process, the process liquid(e.g. damage by excessive tem-peratures) and the tank (e.g. thermal damage)With the aid of temperature sen-sors and suitable ...
Jigs & Clamps for Anodizing Precise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks o...
Anode Baskets/Plating Equipment & Supplies / Anode AccessoriesDescriptionAnode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.Baskets Construction MaterialTitaniumZirconiumNiobiumStainless SteelCarbon SteelMonelStandard Styles and sizes of Anode BasketsRectangular – 2.5″ x 6″ x LengthRound – 2.5″ diameter x LengthStandard Stock Lengths Included 18″, 24″, 30″, other lengths are built to orderAll Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, MonelTECHNICAL INFORMATION:Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes in a bathMini-Expanded / ...
Heat Exchangers - PFA, FEP, Fluoropolymer Heat Exchangers:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 F...
Double Plating Barrel UnitsBarrel Units For ElectroplatingPlating barrel machines are available in single, double barrel unit (tandem barrels) or multi barrel formsThe majority of parts are manufactured from PE1000 grade polyethylene, giving extended lifeBarrel drop arm carriers are reinforced with high tensile steel rods for greater strength and stabilityAll top frames are manufactured from type 304 or 316 stainless steel with powder coated finish as an optional extraUnique self-aligning system Barrel units are supplied in integral drive or tank drive formatsFeatures of PreciseHeater Barrel UnitsOur unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the standard “...