Products Products

/ Products

Release Time: 2025 - 05 - 23

Ultrapure In-Line PFA Fluid HeatersPVDF/PFA ultrapure in-line fluid heaters are ideal for heating deionized water, acids, and less aggressive process chemistries use in high-purity processes of semiconductor, solar, MEMS manufacturing, and other industries using high-purity fluids. These heaters are designed for recirculation and point-of-use fluid heating applications. Their small footprints allow them to easily integrate into current systems. Available in 2-18 kW and various voltages.Features & BenefitsUltrapure design with PVDF/PFA wetted surfacesFast response with low watt densityNo nitrogen purge required, reducing operating costsCompact design of 10-30-in. heights, 4-6-in. diametersFlexible designs with many options, safety features, voltages, and power outputsSafety FeaturesLiqu...

Metal Finishing Equipment Anodizing Baskets

Release Time: 2021 - 05 - 12

Metal Finishing Equipment Anodizing BasketsPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SIZING AND STYLES:Rectangular Baskets: 2-1/2” x 6″ – Standard Stock Lengths include 18″, 24″, 30″, 36″. Other lengths are built to order.Round Baskets: 2 1/2″ Diameter x Length – Standard Stock Lengths include 18″, 24″, 30″, and 36″.Other lengths are built to order.CONSIDERATIONS FOR...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersPTFE Heat Exchangers: A Universal Solution for Corrosive EnvironmentsTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNP...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Inline PTFE Heat Exchangers are designed for Heating and Cooling highly corrosive and high purity fluidsSHELL & TUBE TYPEPTFE Tube Bundles of 30 to 1,200 TubesTube Diameters Ranging from 1/8″ to 3/8″Shell Diameters Ranging from 3″ to 14″Shell Material: Available with Carbon Steel, PTFE Lined CT and SS ShellIndustry: Semiconductor Industry, Fine chemical IndustryFluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(8...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater :SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644117(8)...

Spiral PTFE Immersion Heaters for Chemical Processing Baths

Release Time: 2016 - 07 - 19

Spiral PTFE Immersion Heaters for Chemical Processing Baths :Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(...

Products Product Details

You are here : Home → Products → Chemical pumps & Filtration systems

Chemical pumps & Filtration Systems

Spec:

Scope:

Availability: 2025 - 05 - 23

Describe:

Explain:

Chemical pumps & Filtration Systems A: FeaturesAs The Pure Nickel or Pure Copper or Pure Gold Production Plating Line, their chemical liquid has much crystal particles, if use the normal filter with magnetic pump, will make the pump burned while pumping the liquid. So Our SV Chemical Nickel Filter series can resolve this problem. It can stand with High Temp. Around 90 degree C, the pump can work without water, and will no problem while pumping any crystal particles. 1. The high precision and high quality filtering result, lead to the best plating quality. 2. The filter can resolve the crystal particles problem, to avoid any damage on pump. And it can work with above 90 degree C Temp. 3. Very easy replacement of filter cartridges. Easy install...

Catalog Download

Inquiry

Features

Chemical pumps & Filtration Systems

Filtration systems

A: Features

As The Pure Nickel or Pure Copper or Pure Gold Production Plating Line, their chemical liquid has much crystal particles, if use the normal filter with magnetic pump, will make the pump burned while pumping the liquid. So Our SV Chemical Nickel Filter series can resolve this problem. It can stand with High Temp. Around 90 degree C, the pump can work without water, and will no problem while pumping any crystal particles.

1. The high precision and high quality filtering result, lead to the best plating quality.
2. The filter can resolve the crystal particles problem, to avoid any damage on pump. And it can work with above 90 degree C Temp.
3. Very easy replacement of filter cartridges. Easy installation the filter and pump.
4. Using the configuration protection switch or use the buckle switch.

B: Details

Model		PH-204	PH-206	PH-208	PH-212	PH-218
Filter material	B type	20' * 4	20' * 6	20' * 8	20' * 12	20' * 18
Applicable for plating bath(Ton)		0.8	1 - 2	1 - 3	2.5 - 4	4 - 6.5
Filtering capacity(L/min)		80	150	180-220	220	330 - 50
Filter area(m²)	B type	1	1.5	2	3	4.5
Outlet/Inlet Dimentions(inch)		1	1 - 1/2	1 - 1/2	2	2

C: We can do for factories, resellers,wholesale dealers or agents

1. 100% new and good quality guarantee,with 1 year guarantee of the machine;
2. Free design based on your request, non-standard design just more quantities requested ;
3. Free technical support and service ;
4. Choose the best shipping type for you, and good after-sale service

Chemical pumps & Filtration Systems

D: Quality and Raw Materials

1. 100% pre-tested on each item before shippment;
2. Through the QC inspection many times;
3. Strict production operation ;
4. Environmental protection material;
5. Made from A grade PP or PVDF or CPVC material.

Horizontal Filter Pumps 6

Release Time: 2021 - 04 - 14

Horizontal Filter Pumps Horizontal Filter Pumps18000 - 36000 L/HCartridgesTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• DOE cartridges• All PP construction, max. temperature PP 80˚C• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection, dry run protection, contact manometer• By pass with flowmeter• Single open end cartridges

Chemical pumps & Filtration Systems

Release Time: 2021 - 02 - 27

Vertical Pumps 2000 - 10000 L/H

Release Time: 2016 - 04 - 01

Chemical Vertical PumpsVertical Pumps2.000 - 10.000 l/hTypical applicationsPlating - Rinsing - FiltrationWaste treatmentFeatures• Immersion length 300mm• Environmentally safe in-tankinstallation• Free turning shaft - no seal• Self priming - can run dry• Full length motor shaft• Outlet sockets available inPP and CPVC OptionsSuction extension pipe Hose connection

Vertical Pumps 1000-10,000 L/H

Release Time: 2016 - 04 - 03

Chemical Vertical Pumps Vertical Pumps1000 - 10000 L/HTypical applications• Plating - Rinsing - FiltrationFeatures• Immersion length series D90 270mm / D120 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Hose connection

Polypropylene Cartridge Filter Chamber 1004

Release Time: 2001 - 05 - 17

Polypropylene Cartridge Filter Chamber 1004SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate960 gphQuantity of Filter Tubes in Chamber4 Size of Filter Tubes in ChamberMSC15P10P Max. Pressure at 72ºF140 psiInlet Connection1-1/2' Flange Outlet Connection1-1/2' Flange Weight225.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Horizontal Filter Pumps 5

Release Time: 2001 - 04 - 14

Horizontal Filter Pumps Horizontal Filter Pumps18000 - 34000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP construction• Max. temperature PP 80˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Dry run protection• By pass with flowmeter• Contact manometer• Si...

Vertical Filter Pumps System

Release Time: 2021 - 04 - 12

Vertical Filter Pumps SystemVertical Filter Pumps7000 - 11000 L/HTypical applicationsPlating and process industryFeaturesEnvironmentally safe in-tank installationCompact filter systemSealless pump, can run drySelf-priming OptionsCustomised mounting plateSuction extension pipeCPVC/PVDF sockets or hose connectionBag filtersSS filter systemsOut-of-tank mounting

Vertical Pumps 40000 - 100000 L/H

Release Time: 2021 - 04 - 02

Vertical Pumps 40000 - 100000 L/HVertical Pumps40000 - 100000 L/HTypical applications• Plating - Rinsing - Filtration• Waste treatment• ScrubbingFeatures• Available in PP or NPP• Immersion length 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Out-of-Tank model• Vapour lock• Strainer

Vertical Pumps 1000-12000 L/H

Release Time: 2021 - 04 - 02

Vertical Pump 1000-12000LVertical Pumps2000 - 12000 L/H Typical applications • Plating – Rinsing – Filtration • Waste treatmentFeatures • Immersion length 300mm • Environmentally safe in-tank installation • Free turning shaft – no seal • Self-priming – can run dry • Full length motor shaft • Suction strainer • Outlet sockets available in PP and CPVCOptions • Suction extension pipe • Hose connection

Vertical Filter Pumps

Release Time: 2011 - 04 - 12

Vertical Filter Pumps500 - 9000 L/HTypical applications• Plating and process industryFeatures• Environmentally safe in-tank installation• Compact filter system• Sealless pump, can run dry• Self primingOptions• Customised mounting plate• Suction extension pipe• CPVC/PVDF sockets or hose connection• Manometer for series 11

Polypropylene Cartridge Filter Chambers 2004

Release Time: 2001 - 05 - 10

Polypropylene Cartridge Filter ChambersSpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate1,920 gphQuantity of Filter Tubes in Chamber4 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection1-1/2' Flange Outlet Connection1-1/2' Flange Weight240.0 lbsManufacturerPrecise Heater 1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Plating Chemical Filtration Unit for Nickel Electroplating

Release Time: 2021 - 04 - 14

Plating Chemical Filtration Unit for Nickel ElectroplatingA: Features As ABS or hardware electroplating production lines require very high precision and high quality for filtering equipment. Especially for acid copper and nickel processes, our latest filter series SPF is a special filter for acid and nickel processes. It uses an integrated filter barrel and a pump with a cooling system. It can be combined with an intelligent control system to ensure the best filtering effect, and to ensure that there is no leakage of chemicals. Have CE/EMC certificate support. This SPF series filter has two filter barrel materials, PP material type and the latest modified material transparent type. Integrated molding, filter housing without any welding position.Th...

Horizontal Filter Pumps 2

Release Time: 2021 - 04 - 12

Horizontal Filter Pumps SystemHorizontal Filter Pumps3000 - 6000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP construction• Max. temperature PP 80˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Contact manometer• Single open end cartridges

Horizontal Filter Pumps 1

Release Time: 2021 - 04 - 12

Horizontal Filter PumpsHorizontal Filter Pumps1000 - 3000 L/HCartridgesTypical applications• Plating and process industryFeatures• Magnetic drive pump• Filter chamber with welded bottom (no seal)• One or two filter chambers (parallel or serial)• String wound, spunbonded, pleated or carbon cartridge• All PP or PVDF construction• Max. temperature PP 80˚C / PVDF 100˚C• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, air release and drain valveOptions• Hose connection• Pressure gauge• Single phase motor• Single open end cartridges

Vertical Pumps 2000 - 40000 L/H

Release Time: 2021 - 04 - 02

Vertical Pumps 2000 - 40000 L/HVertical Pumps2000 - 40000 L/HTypical applications• Alkaline cleaners• Electroless nickelFeatures• Sealless• Self priming• Integral drive shaft• Fume protectionOptions• Suction extension pipe• Customised mounting plate• Customised immersion length• Out of tank version (OT)• MPT threaded discharge pipe (X version)

Horizontal Disc Filtration Systems

Release Time: 1997 - 05 - 16

Horizontal Disc Filtration SystemsOur smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.Designed for the filtration of nickel, copper and zinc electrolytes.Operating temperature to 180 °F (82 °C)For plating tanks from 200 to approximately 400 gallons depending on the type of process.Can be supplied with horizontal discs or cartridges depending on the application.Filter Pack Easily MaintainedAll filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.SpecificationsPrecoated Flow Rate (Filtering Capacity)600 gphOpen Pumping Capacity2,400 gphFiltration Surface Area7 ft²Number of Filter Media20...

Polypropylene Cartridge Filter Chambers 2008

Release Time: 1996 - 05 - 17

Polypropylene Cartridge Filter Chambers 2008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate3,840 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight265.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Polypropylene Cartridge Filter Chambers 3008

Release Time: 2021 - 05 - 06

Polypropylene Cartridge Filter Chambers 3008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Horizontal Pumps 1000 - 3000 L/H

Release Time: 2021 - 04 - 02

Horizontal Pumps 1000 - 3000 L/HHorizontal Pumps1000 - 3000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters

Vertical Pumps 40000 - 180000 L/H

Release Time: 2021 - 04 - 02

Vertical Pumps 40000 - 180000 L/HVertical Pumps40000 - 180000 L/HTypical applications• Designed and developed for low life cycle cost in corrosive low pressure applications• Scrubbing (fume and air)• Waste water treatment• RinsingFeatures• Low energy consumption due to high hydraulic efficiency and IE3 class Premium Efficiency Motor• Machined high grade Simona® AlphaPlus™ PP• Elastomers EPDM• Sealless pump, can run dry endlessly• Round mounting plate for easy installation• Including discharge pipe with GF union • Impeller locked (no damage with wrong rotation direction)• Oversized motor according to Hendor heavy duty specifications• Stainless steel shaft and fasteners (no metal in contact with liquid) • Motor 4...

Vertical Pumps 12000 - 43000 L/H

Release Time: 2021 - 04 - 02

Vertical Pumps 12000 - 43000 L/HVertical Pumps12000 - 43000 L/HTypical applications• Plating - Rinsing - Filtration• Waste treatmentFeatures• Immersion length 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self-priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Hose connection• Out of Tank model

Horizontal Filter Pumps 4

Release Time: 2011 - 04 - 06

Horizontal Filter Pumps Horizontal Filter Pumps35000 - 110000 L/HDiscs, cartridges, bagsTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filterchamber with welded bottom (no seal)• Thin discs (large filter area) or thick discs (large dirt holding capacity)• Filter paper (thin/thick), cloth, cartridges or bags• Discs can be removed in manageable stacks• All PP construction, max. temperature 80˚C• Wheels for portability may be removed once installed• Multifunctional large round slurry tank with sloping bottom• Unions for rigid piping (PP, CPVC sockets)• Standard with 3 phase motor, lead without plug, pressure gauge, air release and drain...

Horizontal Pumps 2000 - 12000 L/H

Release Time: 2016 - 04 - 02

Horizontal Pumps 2000 - 12000 L/HHorizontal Pumps2000 - 12000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection

Polypropylene Cartridge Filter Chambers 2012

Release Time: 2001 - 05 - 30

Polypropylene Cartridge Filter Chambers 2012SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber12 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Horizontal Filter Pumps 3

Release Time: 2021 - 04 - 12

Horizontal Filter Pumps Horizontal Filter Pumps 5000 - 18000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP or PVDF construction• Max. temperature PP 80˚C / PVDF 100˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Dry run protection• By ...

Horizontal Pumps 7500 - 30000 L/H

Release Time: 2021 - 04 - 02

Horizontal Pumps 7500 - 30000 L/HHorizontal Pumps7500 - 30000 L/HTypical applications• Ideal for abrasive solutions or those that contain ferrous particles• Suitable for most plating solutions• Not suitable for electroless nickelFeatures• Mechanical seal material depends on application• Traditionally cost effective to purchase and maintain• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection

Horizontal Pumps 10000 - 30000 L/H

Release Time: 2021 - 04 - 02

Horizontal Pumps 10000 - 30000 L/HHorizontal Pumps10000 - 30000 L/HTypical applicationsIdeal for clean or slightly contaminated acids and alkalinesSuitable for most plating solutionsNot suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeaturesMagnetic driveSealless, therefore leakfree Provide extra safety factor for agressive and expensive liquidsStandard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVCtemp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚FMotor with two component Polyurethane coating for excellent chemical resistanceOptionsHose adaptersFlangesPriming chamberDry run protection

Polypropylene Cartridge Filter Chambers 2018

Release Time: 1999 - 05 - 12

Polypropylene Cartridge Filter Chambers 2018SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate8,640 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight290.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Horizontal Pumps 10000 - 40000 L/H

Release Time: 2021 - 04 - 02

Horizontal Pumps 10000 - 40000 L/HHorizontal Pumps10000 - 40000 L/HTypical applications• Hazardous and toxic solutions• Acids, alkalines and other corrosive liquids• Plating, pre- and post-treatment solutionsFeatures• Magnetic coupled, sealless providing maximum safety• High power Neodymium rare-earth magnets • Increased efficiency by incorporated vortex chamber• Robust structure providing reliable and secure performance• Highly durable PP allowing temperatures up to 80˚C• Standard with GF union connetions with a choice of sockets• Modular design for easy and low cost maintenance• Quality fasteners out of passivated Stainless Steel• European made motor with acid resistant 70 µm 2C PU coating Options• Hose adapters or flanges• Priming chamb...

Polypropylene Cartridge Filter Chambers 2038

Release Time: 2001 - 05 - 11

Polypropylene Cartridge Filter Chambers 2038SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate12,960 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection3' Flange Weight2110.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Hot Products / Hot Products More

Ultrapure In-Line PFA Fluid Heaters

2025 - 05 - 23

Metal Finishing Equipment Anodizing Baskets

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01