Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → Chemical pumps & Filtration systems > Horizontal Filter systems

Horizontal Disc Filtration Systems

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

Horizontal Disc Filtration SystemsOur smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.Designed for the filtration of nickel, copper and zinc electrolytes.Operating temperature to 180 °F (82 °C)For plating tanks from 200 to approximately 400 gallons depending on the type of process.Can be supplied with horizontal discs or cartridges depending on the application.Filter Pack Easily MaintainedAll filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.SpecificationsPrecoated Flow Rate (Filtering Capacity)600 gphOpen Pumping Capacity2,400 gphFiltration Surface Area7 ft²Number of Filter Media20...

Catalog Download

Inquiry

Features

Horizontal Disc Filtration Systems

Our smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.

Designed for the filtration of nickel, copper and zinc electrolytes.
Operating temperature to 180 °F (82 °C)
For plating tanks from 200 to approximately 400 gallons depending on the type of process.
Can be supplied with horizontal discs or cartridges depending on the application.

Filter Pack Easily Maintained
All filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.

Specifications

Precoated Flow Rate (Filtering Capacity)	600 gph
Open Pumping Capacity	2,400 gph
Filtration Surface Area	7 ft²
Number of Filter Media	20
Filter Media Diameter	8-1/8 '
Sludge Holding Capacity	123 in³
Approximate Length	40 '
Approximate Width	16 '
Approximate Height	36 '
Approximate (Crated) Net Weight	290 lbs
Hose Connection Suction	1-1/2 '
Hose Connection Discharge	1-1/4 '
Hose Length	10 ft
TEFC Motor	1 hp
Pump Options	PPM - Magnetic End Suction Pump - Standard PPQ - Magnetic Self-Priming Pump - Adder PPS - Mechanical Seal CRS-40-PP - No Extra Charge
Slurry Tank Option	NO SLURRY TANK - Standard WITH SLURRY TANK - Adder

Features and Benefits

All polypropylene construction withstands highly acidic environments
Magnetic drive pump with silicone carbide bearings is standard
'Unitized Pack'
Large sludge holding capacity
Low disposal cost (100 GPH per sq/ft of surface area)
High efficiency
Pre-coated flow rate to 600 GPH
Temperatures to 180 °F(82 °C)
Specific gravities to 1.5
Shipped ready for immediate operation

Filter

The filter chamber is constructed of all polypropylene with bottom inlet and top discharge.
Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. An air release diaphragm valve is provided.
A stainless steel pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard.
Base is polypropylene with stainless steel channel support structure and polypropylene feet. Casters are available upon request.

Unitized Pack

The disc assembly is all polypropylene. All filters discs are configured as a 'unitized pack' to allow easy removal for maintenance. The unitized pack will consist of a bottom plate, bottom gasket, media, center post, pressure plate, and locking nut with handles.
Filter media selected for the application is placed between the rigid polypropylene discs. Ten (10) micron cellulose is standard. Carbon/cellulose (10 micron) and polypropylene of various densities are available.

Magnetic Drive Pump

A polypropylene, magnetic drive pump Model PM is furnished with a 1HP TEFC motor. High purity silicon carbide bearings and viton o-rings are standard. The magnetic switch motor starter is housed in a liquid tight NEMA 4X enclosure.

Slurry Tank Specifications

The slurry tank is all polypropylene construction and is furnished with Model PPM-SY units. Slurry tanks are used to facilitate pre-coating, addition of carbon (if required), self-priming of pump and solution make-up. These are sized to store the complete capacity of the filter chamber during changing of the media or maintenance.

Piping, Valves and Connections

Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.

Horizontal Filter Pumps 6

Release Time: 2021 - 04 - 14

Horizontal Filter Pumps Horizontal Filter Pumps18000 - 36000 L/HCartridgesTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• DOE cartridges• All PP construction, max. temperature PP 80˚C• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection, dry run protection, contact manometer• By pass with flowmeter• Single open end cartridges

Chemical pumps & Filtration Systems

Release Time: 2021 - 02 - 27

Chemical pumps & Filtration Systems A: FeaturesAs The Pure Nickel or Pure Copper or Pure Gold Production Plating Line, their chemical liquid has much crystal particles, if use the normal filter with magnetic pump, will make the pump burned while pumping the liquid. So Our SV Chemical Nickel Filter series can resolve this problem. It can stand with High Temp. Around 90 degree C, the pump can work without water, and will no problem while pumping any crystal particles. 1. The high precision and high quality filtering result, lead to the best plating quality. 2. The filter can resolve the crystal particles problem, to avoid any damage on pump. And it can work with above 90 degree C Temp. 3. Very easy replacement of filter cartridges. Easy install...

Horizontal Filter Pumps 5

Release Time: 2001 - 04 - 14

Horizontal Filter Pumps Horizontal Filter Pumps18000 - 34000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP construction• Max. temperature PP 80˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Dry run protection• By pass with flowmeter• Contact manometer• Si...

Plating Chemical Filtration Unit for Nickel Electroplating

Release Time: 2021 - 04 - 14

Plating Chemical Filtration Unit for Nickel ElectroplatingA: Features As ABS or hardware electroplating production lines require very high precision and high quality for filtering equipment. Especially for acid copper and nickel processes, our latest filter series SPF is a special filter for acid and nickel processes. It uses an integrated filter barrel and a pump with a cooling system. It can be combined with an intelligent control system to ensure the best filtering effect, and to ensure that there is no leakage of chemicals. Have CE/EMC certificate support. This SPF series filter has two filter barrel materials, PP material type and the latest modified material transparent type. Integrated molding, filter housing without any welding position.Th...

Horizontal Filter Pumps 2

Release Time: 2021 - 04 - 12

Horizontal Filter Pumps SystemHorizontal Filter Pumps3000 - 6000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP construction• Max. temperature PP 80˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Contact manometer• Single open end cartridges

Horizontal Filter Pumps 1

Release Time: 2021 - 04 - 12

Horizontal Filter PumpsHorizontal Filter Pumps1000 - 3000 L/HCartridgesTypical applications• Plating and process industryFeatures• Magnetic drive pump• Filter chamber with welded bottom (no seal)• One or two filter chambers (parallel or serial)• String wound, spunbonded, pleated or carbon cartridge• All PP or PVDF construction• Max. temperature PP 80˚C / PVDF 100˚C• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, air release and drain valveOptions• Hose connection• Pressure gauge• Single phase motor• Single open end cartridges

Horizontal Disc Filtration Systems

Release Time: 1997 - 05 - 16

Horizontal Filter Pumps 4

Release Time: 2011 - 04 - 06

Horizontal Filter Pumps Horizontal Filter Pumps35000 - 110000 L/HDiscs, cartridges, bagsTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filterchamber with welded bottom (no seal)• Thin discs (large filter area) or thick discs (large dirt holding capacity)• Filter paper (thin/thick), cloth, cartridges or bags• Discs can be removed in manageable stacks• All PP construction, max. temperature 80˚C• Wheels for portability may be removed once installed• Multifunctional large round slurry tank with sloping bottom• Unions for rigid piping (PP, CPVC sockets)• Standard with 3 phase motor, lead without plug, pressure gauge, air release and drain...

Horizontal Filter Pumps 3

Release Time: 2021 - 04 - 12

Horizontal Filter Pumps Horizontal Filter Pumps 5000 - 18000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP or PVDF construction• Max. temperature PP 80˚C / PVDF 100˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Dry run protection• By ...

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16

Horizontal Disc Filtration Systems

Specifications

Precoated Flow Rate (Filtering Capacity)

Open Pumping Capacity

Filtration Surface Area

Number of Filter Media

Filter Media Diameter

Sludge Holding Capacity

Approximate Length

Approximate Width

Approximate Height

Approximate (Crated) Net Weight

Hose Connection Suction

Hose Connection Discharge

Hose Length

TEFC Motor

Pump Options

Slurry Tank Option

Features and Benefits

Features and Benefits

Filter

Filter

Unitized Pack

Unitized Pack

Magnetic Drive Pump

Magnetic Drive Pump

Slurry Tank Specifications

Slurry Tank Specifications

Piping, Valves and Connections

Piping, Valves and Connections