Fluoropolymer (PTFE/PFA) Heat Exchangers The Fluoropolymer Advantage -- A leader influoropolymer heat exchangers for over 50 years –now offers shell and tube heat exchangers madewith ultrahigh-purity (UHP) PFA tubing that allowschemical processors and others to conform to thehighest standards of purity.The UHP heat exchangers are single pass, countercurrent designs that incorporate PreciseHeater’s uniquehoneycomb construction. They are ideal for heatingand cooling ultrapure water, acids and othercorrosive chemicals typically used in electronics,pharmaceutical, and semiconductor manufacture.Our new XXP280 Heat exchanger is the latesttechnology for heating and cooling, corrosive and ultrapure chemicals. The heat exchanger’s100% Fluoropolymer construction and ruggeddesign will allow...
Electric Immersion coil heat exchangersImmersion coil heat exchangers are often used in a variety of applications where a fluid needs to either be heated, cooled, or maintained at a specified temperature by the end user. Immersion coils most common uses are in industrial applications for tanks that may be exposed to outside temperatures and weather, surface finishing applications where an acid is used to apply a coating to a product (this could be galvanizing, chrome plating, or nickel-plating applications), steel pickling applications, energy storage applications where a basic solution is used to harvest excess energy from a power grid, and many other applications that have heating or cooling needs.An immersion coil is a heat transfer device that is directly immersed into a tank of soluti...
High Quality Immersion Coils Heat ExchangersImmersion Coil Heat Exchangers have small tubes made out of flexible fluoropolymer that are braided into coils. Coils can be installed into almost any tank configuration. Braids are separated by spacers for optimum thermal performance.Unlike some immersion coils made of sub-quality material, PreciseHeater tubing is made of high-quality FEP, PFA or proprietary Q-Series resins. As the original manufacturer of fluoropolymer heat exchangers, PreciseHeater has the tightest quality specs and the most experience solving scale and fouling issues.PreciseHeater heat exchangers feature braided tubing bundles and unique fused ends that provide significantly better heat transfer from a smaller footprint than similar heat exchangers, allowing installation in v...
PVDF/PFA Inline Chemical Heat ExchangersPVDF/PFA heat exchangers offer a variety of solutions for heating, cooling, andtemperature trimming of fluids used in ultra-puremanufacturing processes. They are ideal for heatingand cooling deionized water, solvents, and Piranha/SC1, among other high-purity fluids. VesperTM productsare available as standalone heat exchangers, or asintegrated heaters and heat exchangers. VesperTMhousings are PP, PVDF, or PFA, and the heatexchanger tube bundles are PFA to ensure chemicalcompatibility. All models are available in various sizes. All-in-OneHeaters & Heat ExchangersPH Series are compact all-in-one heater andheat exchangers. They are ideal for heating and cooling.They offer large surface areas for heat exchange andfast temperature respo...
Immersion TypePolymer Heat Exchanger PreciseHeater all-plastic immersion-type grid coils are suitable for heating and cooling of concentrated inorganic acids, cooling of alkaline corrosive liquids, heating or cooling of high-purity media, or aggressive and scale depositing liquids in tanks or other process equipment. They are integral components in the surface finishing and the chemical process industries. PVDF grid coils can be used for steam heating of corrosive media such as inorganic acids utilized in the steel picking industry.PreciseHeater thermoplastic heating and cooling grid coils are fabricated from standardized tubular modules which allows an optimal design to meet the customers’ specifications. All fittings and support elements are also designed according to the cust...
Plastic Shell Tube Heat ExchangerPolymer heat exchangers are suitable forheating and cooling a variety of media whe-re metallic plate heat exchangers cannotbe used.The required size can be selected accordingto the desired thermal output and the con-tainer dimensions.The heat exchangers are integrated in thecontainer via either factory-fitted attach-ments, or via a mount on the frame.Alternatively, rods that protrude from theheat exchanger are available for fitting atthe customer’s site.The tube design implicates a large heattransfer area. The transfer area is even largerthan with plate heat exchangers at thesame displaced volume.This means that an adequate thermal out-put can be achieved despite the lower heattransfer properties of polymers.Polymer heat exchangers have PFA tubeswhich are w...
Immersion Heat Exchanger Coils for Corrosive/Ultrapure ChemicalsToday, Immersion Coils for heating and cooling are available in a variety of shapes, materials,designs and assemblies from various manufacturers. Polymer (Polyethylene, High Performancefluoropolymer), common and exotic metal alloys, pancake coil shapes, racetrack coils, gridstructures, spaghetti tube U bends, welded and non-welded tube terminations, and tube endsconnected to a manifold are among the many options available. Less than fully informeddecisions lead to suboptimal or wrong choices (for example, based on purchase price only).Such choices end up in faster than expected deteriorating performance or even catastrophicfailure.Among materials, fluoropolymer coils have been around for 40+ years, and have secured aunique pos...
Fluoropolymer Heat ExchangersPH heat exchanger manufacturers who make or use extremely corrosive liquids require corrosion-resistant heat exchanger materials to achieve reliable processes. These are processes that require dilution, condensation, heating, cooling, and crystallization. Fluoropolymer tubing, piping and heat exchangers are essential for industrial companies involved Making or using dilute sulfuric acid, nitric acid, hydrochloric acid, and hydrofluoric acid. 2. Acid recycling/regeneration 3.Metal finishing including galvanizing, plating, cleaning, and pickling Producing chlor-alkali or caustic soda.Thousands of customers around the world enjoy lower operational costs by using our heat exchangers day-in and day-out with flawless performance. That’s because, as ...
Teflon Tubular Coils Heat ExchangerTUBULAR HEAT/COOLING EXCHANGERTEFLON TUBECOILSPRODUCT DESCRIPTIONExcellent chemical compatibility and rugged design for your heating or cooling application.FEATURESAll wetted parts of fluoropolymer (FEP, PFA, or PTFE) construction.Heavy duty CPVC mounting bracket and 1/8-inch thick perforated guard helps protect the coil from damage.Heavy wall tubing improves circulation and minimizes pressure drop.SPECIFICATIONSStandard coils are FEP and rated up to 60 PSI steam service. PFA coils are available for steam service up to 140 PSI.5.5 square foot to 120 square foot of exchange area standard.20 PSI minimum steam pressure required for operation.Tubing sizes: 1/2 inch (12.5mm) diameter for larger coils and 1/4 inch (6.5mm) diameter for smaller coils.Inlet and Ou...
Industrial PTFE Immersion Coils Heat Exchanger:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(100...
1Mpa PTFE Immersion Coil Heat Exchanger For Heating And CoolingTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80)XC-40...
Fluoropolymer Shell and Tube Heat ExchangersThe AllroundersFluoropolymer Shell and Tube Heat Exchangers made of Moldflon® plastics are designed for external use and are almost universally resistant to acids, alkalis and corrosion.For safe heating - cooling - condensing of pure and ultra pure media. Manufactured entirely from Moldflon® PFA, PVDF, PP or PE, possible contamination from other materials is avoided.All the welded joints for the flow of inner media are fabricated based on a non-contact IR butt welding process which is particular important when using pure and high purity media. Dead spots where for example bacterial contamination may occur, are ruled out by this welding process.All the IR welds are computer controlled and the welding parameters of these jo...