Products Products
  / Products
Release Time: 2022 - 04 - 18
TIH In-line Chemical HeaterProcess fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The TIH offers unmatched performance and reliability with the ability to heat a variety of chemicalsup to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the mostdurable and long-lasting inline chemical heater available! FEATURESDesigned for Performance and SafetyHigh-temperature configuration available to heatchemicals up to 210°C Multiple plumbing layouts available to better facilitateinstallation into a variety of tool configurationsGrounded electric heating elementsRedundant temper...
Release Time: 2021 - 05 - 12
Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...
Release Time: 2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...
Release Time: 2021 - 03 - 16
PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...
Release Time: 2017 - 09 - 03
Highest Temperature Heating Available!PTFE Inline Chemical Heater - Electric Inline HeaterBest-in-class chemical heaterThe Inline Chemical Heater offers unmatched performance and reliability with the ability to heat a variety of chemicals. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the most durable and long-lasting inline chemical heater available! Multiple plumbing layouts facilitate easy installation into a variety of tool configurations. Fluoropolymer (PTFE) surfaces protect from permeation. Heats up to 210°C (410°F)ApplicationsSemiconductor Wet ProcessesSterilization/CleaningSolar/Photovoltaic Wafer CleaningPRODUCT DESCRIPTIONUnmatched ...
Release Time: 2016 - 08 - 01
Highest Temperature Heating Available!Fluoropolymer (PTFE) Inline Chemical Heater:Best-in-class chemical heaterThe Inline Chemical Heater offers unmatched performance and reliability with the ability to heat a variety of chemicals. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the most durable and long-lasting inline chemical heater available! Multiple plumbing layouts facilitate easy installation into a variety of tool configurations. Fluoropolymer (PTFE) surfaces protect from permeation. Heats up to 210°C (410°F)ApplicationsSemiconductor Wet ProcessesSterilization/CleaningSolar/Photovoltaic Wafer CleaningPRODUCT DESCRIPTIONUnmatched in Semic...
Release Time: 2016 - 07 - 27
Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...
Release Time: 2016 - 07 - 21
Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-***  lnine chemical heat exch...
Release Time: 2016 - 07 - 21
Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling For use in most alkaline oracid solutionsVertical or horizontalconfigurationsEvery inch of coil surfaceis active exchange area2-inch thick, low profiledesign 316 stainless steel,Zirconium, Hastelloy Cand Titanium4.6 square foot to 89.9square foot of exchangearea100 PSI working pressure(steam or water) Features & Values   Wide variety of materials available for use in heatingor cooling applications for alkaline or acid solutionsand rinse tanks. Check solution guide or consult withyour chemical supplier for proper sheath material.   Heavy wall, 20 gauge metal tubing available in steel,316 stainless steel and titanium.  1” diamete...
Products Product Details

Titanium Bar/Rod

Spec:
Scope:
Availability: 2022 - 04 - 18
Describe:
Explain:
Titanium Bar/RodApplication:Aircraft TurbinesChemical Processing IndustrialsAerospace FastenersEngine ComponentsAircraft Structural ComponentsHigh-Performance Automatic PartsSports EquipmentMarine ApplicationsMedical IndustryTitanium Bar:Specification and Standard for Titanium Bar and Its Alloys:Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSizeTitanium Bar, Forging Bar & Wire (Round, Square, Rectangle and Hexagon, etc.)ASTM B348, AMS 4928, AMS 6921, AMS 4975, AMS 4978, AMS 4966, ASTM F67, ASTM F136, ASME SB863, AWS A5.16, etc.H7/h7 toleranc...
  • Features


Titanium Bar/Rod


Titanium Bar/Rod


Application:


Aircraft Turbines

Chemical Processing Industrials

Aerospace Fasteners

Engine Components

Aircraft Structural Components

High-Performance Automatic Parts

Sports Equipment

Marine Applications

Medical Industry


Titanium Bar:

Specification and Standard for Titanium Bar and Its Alloys:

Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.

Products

Processing Standard

Grade

Size

Titanium Bar, Forging Bar & Wire (Round, Square, Rectangle and Hexagon, etc.)

ASTM B348, AMS 4928, AMS 6921, AMS 4975, AMS 4978, AMS 4966, ASTM F67, ASTM F136, ASME SB863, AWS A5.16, etc.

H7/h7 tolerance is available.

GR1, GR2, GR3,GR4, GR5, GR7,
GR9, GR12, GR16, GR17, GR23,
Ti-6Al-4V ELI, Ti-3-8-6-4-4, Ti-6-2-4-2, Ti-6-6-2, Ti-5-2.5, Ti-15-3-3-3, etc.

Bar: Φ(0.315”- 24”) x Straight Length/Coil

Wire: Φ(0.001”- 0.25”) x Straight Length/Coil

Welding Wire: Φ(0.020”- 0.20”) x Straight Length/Coil

Mechanical Properties:



Tensile Requirements - ASTM B348/B348M-19

GradeTensile strengthYield strength(0.2% Offset) min or rangeElongation in 4D, min, %Reduction of Area, min, %

ksi(min)Mpa(min)ksiMpa

135240201382430
250345402752030
2HB, C58400402752030
365450553801830
480550704831525
51308951208281025
61208281157951025
7HB, C58400402752030
990620704831525
9D90620704831225
1135240201382430
1270483503451825
1340275251702430
1460410402752030
1570483553801825
1650345402752030
16HB, C58400402752030
1735240201382430
1890620704831525
18D90620704831220
19E1157931107591525
19F135930130 - 159897 - 10961020
19G1651138160 - 1851104 - 1276520
20E1157931107591525
20F135930130 - 159897 - 10961020
20G1651138160 - 1851104 - 1276520
21E1157931107591535
21F140966130 - 159897 - 10961030
21G1701172160 - 1851104 - 1276820
23 1208281107591015
23D1208281107597.5 H, 6.0 /25


Features of Titanium Grades:

  • Titanium Grade 1

  • This is a non-alloyed, low strength titanium product containing low oxygen with high formability.

  • This grade is used in airframes, heat exchangers and desalination units. 

  • Titanium Grade 2

  • This is a non-alloyed, medium strength titanium product.

  • This grade is used in airframes, aircraft engines, and marine equipment.

  • This grade features good weldability and corrosion resistance.


  • Titanium Grade 3

  • This is a non-alloyed, high strength titanium product providing excellent corrosion resistance and good weldability.

  • This grade is primarily used in airframes and aircraft engine parts.


  • Titanium Grade 4

  • This is the highest strength pure non-alloyed titanium product.

  • This grade is used exclusively for aircraft components, marine equipment, surgical implants,

    and hydraulic tubing. It contains good formability and it is corrosion resistant.

  • Titanium Grade 5 (6Al – 4V)

  • This is an alloyed products containing 6% aluminum and 4% vanadium.

    • Titanium Grade 7

    • This is a non-alloyed medium strength product containing palladium in the range of 0.12% to 0.25%.

    • It has superior corrosion resistance. This grade is mainly used for industrial applications.

    • Titanium Grade 9 (3Al – 2.5V)

    • This is an alloyed titanium product containing 3% aluminum and 2.5% vanadium.

    • 6AL - 2Sn - 4Zr - 2Mo (6-2-4-2)

    • This is an alloyed product containing 6% aluminum, 2% tin, 4% zirconium, and 2% molybdenum.

    • 6AL - 6V - 2Sn (6-6-2)

    • This is an alloyed product containing 6% aluminum, 6% vanadium, and 2% tin.

    • 5AL - 2.5Sn (5-2.5)

    • This is an alloyed product containing 5% aluminum and 2.5% tin.

    • 8AL-1V-1Mo (8-1-1)

    • This is an alloyed product containing 8% aluminum, 1% vanadium, and 1% molybdenum.

    Material:

    • Grade 9: Ti-3AI-2.5V

    • Grade 12: Ti-0.3Mo-0.8Ni

    • Grade 23: Ti-6AI-4V ELI








    Release Time: 1996 - 05 - 30
    Titanium Bar/RodApplication:Aircraft TurbinesChemical Processing IndustrialsAerospace FastenersEngine ComponentsAircraft Structural ComponentsHigh-Performance Automatic PartsSports EquipmentMarine ApplicationsMedical IndustryTitanium Bar:Specification and Standard for Titanium Bar and Its Alloys:Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSizeTitanium Bar, Forging Bar & Wire (Round, Square, Rectangle and Hexagon, etc.)ASTM B348, AMS 4928, AMS 6921, AMS 4975, AMS 4978, AMS 4966, ASTM F67, ASTM F136, ASME SB863, AWS A5.16, etc.H7/h7 toleranc...
    Release Time: 1997 - 06 - 03
    Titanium Tube/PipeTitanium Seamless TubeSpecification and Standard for Titanium Tubes and Its Alloys:Apart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSize Titanium Seamless Tube, Pipe Square Seamless Tube ASME SB338, ASME SB337, ASME SB861 AMS4943, AMS 4944, AMS 4945 GR1, GR2, GR3, GR4, GR7, GR9, GR12, GR16, GR17 OD: (0.059”-24.41”) WT: (0.0158”-0.787”) Max Length: 59 feetQuality Tests for Titanium and Titanium Alloy Tubes:Inspections and tests ensure that materials meet international standard specifications ...
    Release Time: 1992 - 06 - 09
    Titanium ForgingApart from the products listed below, other available metal products are not listed here. Other metal products USTi can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube.ProductsProcessing StandardGradeSize   Titanium Flange   ASME B16.5  GR1, GR2, GR3,GR4, GR5, GR7, GR9, GR12, GR16, GR17, GR23, Ti-6Al-4V ELI, Ti-3-8-6-4-4, Ti-6-2-4-2, Ti-6-6-2, Ti-5-2.5, Ti-15-3-3-3, etc. Type: SORF, BLIND, RFWN, etc.Size: NPS1/2”- NPS48”Thickness: Sch5s-Sch80Pressure: CL150, CL300, CL400, CL600, CL900, CL1500, CL2500We supply titanium forging such as:Titanium ringsTitanium discsTitanium flangesTitanium shaftsTitanium Rings:Including titanium seamless ro...
    Release Time: 1996 - 06 - 03
    Metal-Titanium PartsDescriptions Of TitaniumCompared to other metals, titanium is a lustrous and silver transition metal with low density and high corrosion resistance to sea water, aqua regia and chlorine, etc. Titanium is alloyed with aluminum, manganese, iron, molybdenum and other metals to increase strength, to withstand high temperatures, and to lighten the resultant alloy.Advanced Refractory Metals is a leading supplier of titanium products. We offer low pricing and great lead times on all our materials, and we’re capable of supplying custom materials per any specs/drawings you provide us with.List Of Our Titanium ProductsTitanium Wire (diameter)0.050 mm0.063 mm0.080 mm0.10 mm0.125 mm0.16 mm0.20 mm0.25 mm0.32 mm0.40 mm0.50 mm0.63 mm0.80 mm1.0 mm1.60 mmTitanium Rod ...
    Hot Products / Hot Products More
    2022 - 04 - 18
    TIH In-line Chemical HeaterProcess fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The TIH offers unmatched performance and reliability with the ability to heat a variety of chemicalsup to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range ...
    2021 - 05 - 12
    Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode b...
    2021 - 04 - 01
    Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standar...
    Service Hotline
    020-31056110
    客户端下载
    Client Downloads
    Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
    犀牛云提供企业云服务