Products Products
  / Products
Release Time: 2021 - 05 - 12
Anode Baskets,Bags & HooksAnode Baskets Titanium anode baskets or anode cages are available in a variety of shapes, sizes and materials. They are designed to hold the anodes, which provide a source of metallic ions to be plated, and carry the electric current that drives the electroplating process.PreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If st...
Release Time: 2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...
Release Time: 2021 - 03 - 16
PVDF/PFA/PTFE Heat ExchangersPTFE Heat Exchangers: A Universal Solution for Corrosive EnvironmentsTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNP...
Release Time: 2016 - 07 - 27
Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...
Release Time: 2016 - 07 - 21
Inline Fluoropolymer Chemical Heat Exchangers:Inline PTFE Heat Exchangers are designed for Heating and Cooling highly corrosive and high purity fluidsSHELL & TUBE TYPEPTFE Tube Bundles of 30 to 1,200 TubesTube Diameters Ranging from 1/8″ to 3/8″Shell Diameters Ranging from 3″ to14″Shell Material: Available with Carbon Steel, PTFE Lined CT and SS ShellIndustry: Semiconductor Industry, Fine chemical IndustryFluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(80...
Release Time: 2016 - 07 - 21
Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm)     Length(In./mm)    Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes  Depth(In./mm)   Length(In./mm)      Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...
Release Time: 2016 - 07 - 21
SmartOne PTC Max Single Over the Side Heater :SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644117(8)...
Release Time: 2016 - 07 - 19
HX Style Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211   6  (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211   7  (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417   8   (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423   13   (6)4000120-600510(20)735(29)41(1040)HXP42...
Release Time: 2016 - 07 - 13
3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409  14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413  15  (7)6000240480485(19)3FLSP62193FLSP6419   16  (7.5)9000240480660(26)3FLSP92263FLSP9446  17  (8)12000240480840(33)3FLSP122333FLSP12433  18  (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449  21  (10)   5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...
Products Product Details

Plating & Metal Finishing Tank Liners

Spec:
Scope:
Availability: 2021 - 05 - 12
Describe:
Explain:
Plating & Metal Finishing Tank LinersPreciseHeater™ custom fabricates flat sheet liners, one piece primary, and secondary containment liners for all types of applications.  We utilize various methods for welding the different materials, ranging from dielectric machines, which ensure clean fast seals on PVC based materials to automated wedge welders.All inlets, outlets, weirs, skirts and sumps are custom fabricated onto the liner, keeping the liner in one solid piece.  Several different types of materials can be used for containment for each specific chemical and operating temperature requirement.EPA regulations require secondary containment for chemical operations in many states.  Precise Heater can custom fabricate any size liner to fit inside your tank, or fabrica...
  • Features


Plating & Metal Finishing Tank Liners


Plating & Metal Finishing Tank LinersPlating & Metal Finishing Tank Liners


PreciseHeater™ custom fabricates flat sheet liners, one piece primary, and secondary containment liners for all types of applications.  We utilize various methods for welding the different materials, ranging from dielectric machines, which ensure clean fast seals on PVC based materials to automated wedge welders.

All inlets, outlets, weirs, skirts and sumps are custom fabricated onto the liner, keeping the liner in one solid piece.  Several different types of materials can be used for containment for each specific chemical and operating temperature requirement.

EPA regulations require secondary containment for chemical operations in many states.  Precise Heater can custom fabricate any size liner to fit inside your tank, or fabricate a berm around your tank in order to keep chemicals from seeping into the ground soil.  A liner in your storage tank will also ensure a longer life for your vessel, keeping corrosive chemicals from damaging the container. 

Custom Tank Liners

  • Preciseheater™ can fabricate almost any size tank liner, fabricated with the proper material to meet your requirements. Email the application and tank dimensions to us

  Installation and Removal

  • Our experience installers are available to provide complete installation of any liner.  We specialize in the most difficult and complex installations and can assist with the removal of old liners when necessary.

  Turn Key Secondary Containment

  • Our secondary containment gives you the peace of mind that no matter the application; you are protected.  We can assist with both small and large projects.  No size is too small when it comes to secondary containment.

  Confined Entry

  • PreciseHeater™ provides a fully trained staff specific for confined entries.  This allows for us to assist our customers with every aspect of a tank liner or secondary containment installation.

  Repairs

  • We understand first hand the cost of being shut-down when replacing a tank liner.  Let PreciseHeater™ evaluate and repair your existing liner while minimizing your down time and expense. 

Duraliner Customer Tank Liners

  • Duraliner was developed to hold up to both Hard Chrome and Decorative Chrome Applications. We can customize to almost any size or shape. This proprietary PVC blend can be fabricated in either 1/8' or 3/16' materials. We can add a double bottom and a skirt to any liner. 

Collapsible Secondary Containment  

  • Instant secondary containment that allows for access in just minutes with collapsible walls. Our strength of materials can withstand the traffic of a forklift, allowing you to contain almost any product or project. Fabricated out of flexible materials prevents the risk of premature cracking. You can pick up and relocate giving you the flexibility needed today.  

PVDF for Plating on Plastic Etch Tanks

  • Why spend tens of thousands on Rigid PVDF or Titanium tank liners, we offer 45 mil thick PVDF. This patented material is flexible unlike the rigid materials being used today that often cracks prematurely. The cost is a fraction of the rigid materials because of how thin and easy to fabricate



Release Time: 2016 - 07 - 21
Plating Process Tanks & Tank Liner : Utilized heavily in the automotive and hardware industries,Plating process tanks are ideal for coating steel parts and electroplating. With rack and barrel inserts, our plating tanks can hold the chemicals your facility uses, along with water for rinse tanks and more. We can fabricate process tanks to your exact specifications, any size, shape and capacity you require. In addition to our excellent standard industrial warranty, we can also offer extended warranties of  3 years, 5 years and more on our plating process tanks. Custom Manufactured Tanks and Flexible PVC Tank Liners: ·  Process Tanks·  Sectioned Plastic Tanks·  Chemical Storage Tanks·  Vertical ...
Release Time: 2006 - 05 - 31
Electroless Nickel Plating Tank Systems PreciseHeater was the first seller of Electroless Nickel in China. After years of developing new procedures in Electroless Nickel Plating and its chemistry, Our team put together the ultimate “EN” plating system and named it PHISome benefits of the Preciseheater EN system are that it utilizes basic engineering and combines it with years of technical experience. We then customize our knowledge to fit your needs. Unlike our competitors, all our systems are custom built to meet YOUR facility’s requirements.Tank Size: We have designed and built tanks as small as 25 gallons up to 3000 gallons.Material: While we prefer to build our tanks with natural poly, we also have standard white poly, PVC, Titanium,PVDF and stainless...
Release Time: 2006 - 05 - 10
Tanks and LinersPreciseHeater Sales offers plating tanks in Titanium,PVDF,PVC, stainless steel, polypropylene and steel, and plating tank liners in a variety of sizes and materials that prevent plating tank corrosion and provide secondary containment.Typical ApplicationsAccessories AvailablePlating TanksOverflow WeirsRinse TanksSkirtsEtching TanksStainless Steel ClipsStorage TanksSumpsConcrete SumpsDouble BottomsEarthen Pits and PondsLeak DetectorsFloor AreasPatch KitsConcrete TrenchesRigid PVCWaste Water TreatmentBatten Strips (plastic)Horizontal TanksOverflow WeirsConcrete VaultsSkirts
Release Time: 1996 - 04 - 16
Plating & Metal Finishing Tank LinersPreciseHeater™ custom fabricates flat sheet liners, one piece primary, and secondary containment liners for all types of applications.  We utilize various methods for welding the different materials, ranging from dielectric machines, which ensure clean fast seals on PVC based materials to automated wedge welders.All inlets, outlets, weirs, skirts and sumps are custom fabricated onto the liner, keeping the liner in one solid piece.  Several different types of materials can be used for containment for each specific chemical and operating temperature requirement.EPA regulations require secondary containment for chemical operations in many states.  Precise Heater can custom fabricate any size liner to fit inside your tank, or fabrica...
Release Time: 2002 - 05 - 09
Plating Tank LinersPreciseHeater is an industry leader in the design and distribution of custom plating tanks.Plating TanksPlating tanks are constructed of a high-impact co-polymer polypropylene. Polypropylene is a rugged material that will not delaminate or embrittle when exposed to aggressive chemicals.We manufacture plastic tanks for a variety for surface finishing applications, including pickling, galvanizing, anodizing, cleaning, and electroplating tanks.Capabilities OverviewPreciseHeater has the ability to fabricate custom tanks of any size & specification. Tanks are equipped with vertical or horizontal steel encapsulated in polypropylene for external structural support.The following features are available upon request:Heat ExchangersThreaded or Flanged NozzlesInte...
Release Time: 1992 - 05 - 06
Custom Plating TankFor more than 30 years PreciseHeater has specialized in the design, fabrication, and installation of plastic tanks. Our plastic tanks are designed and built in accordance with DVS standards created by the German Welding Society.PreciseHeater has the ability to fabricate plastic tanks of any size, shape, and material. Our versatile manufacturing capabilities make it possible for us to accommodate the needs of each customer.Thermoplastic/FRP Dual-Laminate TanksFor many tank applications the corrosion resistance of thermoplastics is required along with the structural strength of fiberglass. For these applications the best solution often is to utilize a dual-laminate tank construction.Dual laminate is a hybrid system made of fiberglass FRP structure outside and speciali...
Hot Products / Hot Products More
2021 - 05 - 12
Anode Baskets,Bags & HooksAnode Baskets Titanium anode baskets or anode cages are available in a variety of shapes, sizes and materials. They are designed to hold the anodes, which provide a source of metallic ions to be plate...
2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standar...
2021 - 03 - 16
PVDF/PFA/PTFE Heat ExchangersPTFE Heat Exchangers: A Universal Solution for Corrosive EnvironmentsTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36...
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务