Products Products
  / Products
Release Time: 2022 - 04 - 18
TIH In-line Chemical HeaterProcess fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The TIH offers unmatched performance and reliability with the ability to heat a variety of chemicalsup to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the mostdurable and long-lasting inline chemical heater available! FEATURESDesigned for Performance and SafetyHigh-temperature configuration available to heatchemicals up to 210°C Multiple plumbing layouts available to better facilitateinstallation into a variety of tool configurationsGrounded electric heating elementsRedundant temper...
Release Time: 2021 - 05 - 12
Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...
Release Time: 2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...
Release Time: 2021 - 03 - 16
PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...
Release Time: 2017 - 09 - 03
Highest Temperature Heating Available!PTFE Inline Chemical Heater - Electric Inline HeaterBest-in-class chemical heaterThe Inline Chemical Heater offers unmatched performance and reliability with the ability to heat a variety of chemicals. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the most durable and long-lasting inline chemical heater available! Multiple plumbing layouts facilitate easy installation into a variety of tool configurations. Fluoropolymer (PTFE) surfaces protect from permeation. Heats up to 210°C (410°F)ApplicationsSemiconductor Wet ProcessesSterilization/CleaningSolar/Photovoltaic Wafer CleaningPRODUCT DESCRIPTIONUnmatched ...
Release Time: 2016 - 08 - 01
Highest Temperature Heating Available!Fluoropolymer (PTFE) Inline Chemical Heater:Best-in-class chemical heaterThe Inline Chemical Heater offers unmatched performance and reliability with the ability to heat a variety of chemicals. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range of flow and temperature requirements. The TIH is the most durable and long-lasting inline chemical heater available! Multiple plumbing layouts facilitate easy installation into a variety of tool configurations. Fluoropolymer (PTFE) surfaces protect from permeation. Heats up to 210°C (410°F)ApplicationsSemiconductor Wet ProcessesSterilization/CleaningSolar/Photovoltaic Wafer CleaningPRODUCT DESCRIPTIONUnmatched in Semic...
Release Time: 2016 - 07 - 27
Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...
Release Time: 2016 - 07 - 21
Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-***  lnine chemical heat exch...
Release Time: 2016 - 07 - 21
Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling For use in most alkaline oracid solutionsVertical or horizontalconfigurationsEvery inch of coil surfaceis active exchange area2-inch thick, low profiledesign 316 stainless steel,Zirconium, Hastelloy Cand Titanium4.6 square foot to 89.9square foot of exchangearea100 PSI working pressure(steam or water) Features & Values   Wide variety of materials available for use in heatingor cooling applications for alkaline or acid solutionsand rinse tanks. Check solution guide or consult withyour chemical supplier for proper sheath material.   Heavy wall, 20 gauge metal tubing available in steel,316 stainless steel and titanium.  1” diamete...
Products Product Details

Anode Bags

Spec:
Scope:
Availability: 2022 - 04 - 18
Describe:
Explain:
Anode BagsPrecise Heater have been making high-quality anode bags for the electroplating industry for over 30 years. During that time we have strived to provide the highest quality anode bags quickly and economically. We can help with any special requests, troubleshoot problems and provide solutions.Anodes and baskets should be fitted with bags to prevent metal fines or metal residues from entering the electroplating solution. Poly nap and Polypropylene are widely used for anode bag because of its durability. However, other fabrics including cotton and other synthetics are also used successfully. We carry a complete line of materials for quick delivery.Anode Bags that Keep sludge in the bag…not in your bath! Almost all electroplating solutions require anode bags; chances are we’ve already ...
  • Features


Anode Bags


Anode Bags

Precise Heater have been making high-quality anode bags for the electroplating industry for over 30 years. During that time we have strived to provide the highest quality anode bags quickly and economically. We can help with any special requests, troubleshoot problems and provide solutions.


Anodes and baskets should be fitted with bags to prevent metal fines or metal residues from entering the electroplating solution. Poly nap and Polypropylene are widely used for anode bag because of its durability. However, other fabrics including cotton and other synthetics are also used successfully. We carry a complete line of materials for quick delivery.


Anode Bags that Keep sludge in the bag…not in your bath! Almost all electroplating solutions require anode bags; chances are we’ve already made your size and shape to fit a particular problem in the past. We make affordable, quality anode bags of various fabrics to fit your anode bag requirements.


General description: Fabric bag made from material compatible with the application intended. Open on one side to accept the anode or basket. Tie cords are sewn into the opening to attach the bag to the anode or basket hook.


General use: Bagging of Electroplating/Refining anodes and baskets.


Function: Anode bags act as a filter to prevent small metal fines and impurities that develop during the electroplating process from entering the plating solution. They act as a container that allows metal fines generated to receive anodic current and dissolve.


Quality bags that last

We source almost all our Industrial quality fabrics right here in the China wherever possible.

Only top quality braided Polypropylene cord is used.

Premium #69 100% Polypropylene thread.


All fabrics are inspected during the cloth laying process for correct material, visual defects along with thickness checks if suspect. All cordage & thread used are tested for correct material and diameter/weight.


All Draw pockets and tie strings are sewn using a double-needle locks titch machine. This two-seam approach ensures the draw & tie strings remain firmly attached.


The bag is closed using a 5 thread over lock with safety stitch producing the highest quality seam available.


Each bag is then trimmed of any excess threads and inspected for correct size and defects prior to shipping.


Our skilled personnel take great pride in the product they produce.


All our anode bags are made to order due to the incredible number of sizes, materials and options.


We can quickly supply with in stock fabrics. Anode bags made from single layer, double layer, withdraw string only, tie strings only. Drawstring & tie strings, mid bag ties, extra long ties or draw strings, rubber bottom, rubber top, double bottom, Velcro closures. If you have a special request we can accommodate your needs. We have an extensive stock of industrial fabrics in house at all times. The fabrics listed are stock items. If you don’t see a fabric you need, we can try to source it from our many vendors*. We also stock PP cordage in many colors White is standard, but we carry Black, Brown, Yellow, Blue, & Red.


Standard anode bags are flat but there are different options available** flat/boxed bottom, Velcro closer flaps, round, semi round or torus 3d bags. Heat sealed slits for basket tabs.


Options:**


Rubber Bottom. “Crap Trap”


Rubber top.


Double bottoms.


Side Ties,


Colored draw & tie cords.


Velcro closure flaps.


3D Bags.


Boxed bottom bags.


Round and semi round bags.


*Non-stock fabrics are subject to availability and may require minimum quantities.


HOW TO SIZE YOUR ANODE BAGS:


Baskets: Add the width and depth of basket then add 1-1/2” for fit/seam allowance. Then take the length dimension and add 3” for fit/seam allowance.


Example Anode bag to fit 2-1/2”x6”x30” basket 2.5”+6”+1.5”=10” finished width. 30”+3”=33” finished length. The basket requires a 10″x33″ finished bag size.


Ovals: add 2” to the width for fit/seam allowance and 3” to the length for fit/seam allowance.

Example Anode bag to fit3” Ovalx36” long 3+2=5” finished width. 36”+3” =39” finished length. The Oval requires a 5″x39″ finished bag size.


Slabs: add the Width and Depth of slab then add 1” for fit/seam allowance. Then take the length dimension and add 3” for fit/seam allowance.


Rounds:

2-1/2” diameter requires a 5” finished width.

3” diameter requires a 6” finished width.

Add to length 3” for finished length

Finished dimensions are simply the laid flat dimensions measured across the bag.


To Order anode bags you will need all 3 dimensions of the anode/basket and on what side will be open. If you are not certain what material you need. We will need to know what plating solution it will be used in. Then we can make a recommendation.


ANODE BAG INSTALLATION TIPS.


Leaching is important and recommended on all anode bags. Today’s electroplating solutions are very exact and easily subject to upsets. While all our fabrics are to be free of all sizing. You have all the handling of the material and the thousands of feet of thread drawn through well oiled sewing machines. Needless to say we recommend all anode bags are leached prior to Installation. Leaching procedures vary with the material and the electroplating solution they are to be installed on. Always use a leaching solution that will not attack the bag material. Always use a leaching material that is compatible with the plating solution.


An example of a bright nickel bag installation would be soak bags in a 2.5 to 5% sulfuric acid solution with a little wetting agent added for 12-24 hours then rinse with DI water.


At the very least they should be laundered then rinsed with DI water prior to installation.


Consult your plating chemical supplier for a recommend leaching solution and procedures for your operation.


Care should be taken to avoid tearing or damage to the bags during installation.


To ensure that metal fines are kept within the electrical field of the basket, anode bags should be close-fitting and tied so all fines receive anodic current and can dissolve. There should be no ‘billowing’ of the anode bags, which would allow metal fines to fall outside the basket. They should be close-fitting around the basket.


Tie anode bags to the hooks of the basket -not to an unprotected anode rod. Otherwise, moistening of the ties could lead to contamination by anodic dissolution of copper ions into the solution. Double bagging can be desirable.


Anode bags should be removed from the baskets when they become so clogged that free movement of solution through them has become restricted.


It is recommended to use close-fitting anode bags and tie tightly, to prevent metal fines from falling outside the electrical field. Double bag if desired, and only tie the bag to the titanium anode hook, not to an unprotected copper anode rod.


Release Time: 2021 - 05 - 12
Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...
Release Time: 1986 - 05 - 15
Anode Baskets - Process Equipment SolutionsHigh anode efficiencySolid side channelsDurabilityReinforcement straps and standard hooksConstant current distributionNon-corrosiveHigh strengthLightweightUniform anode areaLess voltage lossLess plating bath contaminationCommercially, they are commonly available as:Rectangular titanium anode baskets99.6% commercially pure titanium grade 25” thickness6” widthLength ranges from 12” to 60” Cylindrical titanium anode baskets99.6% commercially pure titanium grade 2Diameter ranges from 2.5” to 5”Length ranges from 12” to 60”With 6”-long hooks Some titanium manufacturers specialize in custom-designed titanium anode baskets that come in other shapes and sizes.Reel to reel plating titanium anode basketsConforming anode basketsSpiral titanium anod...
Release Time: 2021 - 03 - 24
Anode Baskets, Titanium Anode Baskets:We provide many types of very durable titanium anode baskets to fit all metal finishers process lines. Some of the advantages of our titanium baskets are:VARIOUS MESH TYPES INCLUDEPerforatedExpanded metal with 60% to 80% open areaROUND CONFIGURATIONHeavily reinforcedVertical band supportsHorizontal band supportsSolid bottom constructionTop reinforcing support ringTypical 2 ½” diameter or larger if neededRECTANGULAR CONFIGURATIONDouble contact carrier hooksHooks extend well into basket for added supportHeavily vertical reinforcingTypical baskets are 2 ½” x 6” x the length of 8” to 72” or longer if neededCUSTOM BASKETS INCLUDEConforming anodeDipping baskets of all typesSpiralHIGH QUALITY MATERIALS:TitaniumZirconium316 stainless steeltantalumVAR...
Release Time: 1996 - 05 - 09
Anode Baskets For ElectroplatingOur anode baskets are built to the highest standards in the industry, and are backed by a five-year warranty on workmanship. As one of the largest stocking manufacturers of raw material, PH is pleased to provide customers with fast turnaround. If stock is not immediately available, We will design, build and ship custom anode baskets in two weeks – wherever you need them.Considerations For Basket Sizing:Baskets should be 2' to 4' shorter than the longest piece of work.Baskets should be 1' above the solution level.Hook length is measured from the top of anode bar to 1' above the solution level.Quantities for rectangular baskets should be three (3) 2 ½' x 6' baskets for every two feet above the barSizing And Styles:Rectangular Baske...
Release Time: 2021 - 03 - 24
Anode Baskets/Plating Equipment & Supplies / Anode AccessoriesDescriptionAnode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.Baskets Construction MaterialTitaniumZirconiumNiobiumStainless SteelCarbon SteelMonelStandard Styles and sizes of Anode BasketsRectangular – 2.5″ x 6″ x LengthRound – 2.5″ diameter x LengthStandard Stock Lengths Included 18″, 24″, 30″, other lengths are built to orderAll Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, MonelTECHNICAL INFORMATION:Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes in a bathMini-Expanded / ...
Release Time: 2021 - 03 - 24
TITANIUM ANODE BASKETS AND ANODE HOOKS:Custom Anode BasketsIf your anode basket requirements call for other than standard configurations, consult with us for alternatives and custom basket possibilities.Our extensive history in custom anode basket manufacturing gives you the ability to work with directly with our equipment experts to create the exact configuration you’re looking for.Talk with us. Together we’ll find just the answer to your basket dilemma.Considerations for Basket Sizing:Baskets should be 2″ to 4″ shorter than the longest piece of work.Baskets should be 1″ above the solution level.Hook length is measured from the top of anode bar to 1″ above the solution level.Quantities for rectangular baskets should be three (3) 2 ½” x 6″ baskets for every two feet above the bar.Sizi...
Release Time: 1997 - 06 - 19
Titanium Anode Baskets Standard Styles and SizesRectangular—21⁄2′′×6′′×LengthRound—21⁄2′′ Diameter × LengthStandard Stock lengths include 18′′, 24′′, 30′′. Other lengths built to order.All Baskets available in Titanium, Zirconium, Stainless Steel and Monel Mesh Types & Choosing the Right OneMini-Expanded—3⁄16′′×SWD×1⁄2′′LWD............ 65%meshopenareaLarge-Expanded—1⁄2′′×SWD×11⁄4′′LWD........... 75%meshopenareaPerforated — 1⁄2′′ dia. on 11⁄16′′ staggered centers . . . . . . . 50% mesh open areaSWD = Short Width Dimension LWD = Long Width Dimensions on Diamond PatternIndustry Standard calls for 2:1 Anode to Cathode ratio when calculating anodesin a bath.Mini-Expanded Mesh is the most commonly used mesh type, offering a compromise between...
Release Time: 2001 - 08 - 01
Anode BagsPrecise Heater have been making high-quality anode bags for the electroplating industry for over 30 years. During that time we have strived to provide the highest quality anode bags quickly and economically. We can help with any special requests, troubleshoot problems and provide solutions.Anodes and baskets should be fitted with bags to prevent metal fines or metal residues from entering the electroplating solution. Poly nap and Polypropylene are widely used for anode bag because of its durability. However, other fabrics including cotton and other synthetics are also used successfully. We carry a complete line of materials for quick delivery.Anode Bags that Keep sludge in the bag…not in your bath! Almost all electroplating solutions require anode bags; chances are we’ve already ...
Release Time: 2016 - 07 - 21
Anode baskets with bags:Standard Style:Rectangular:Thick :1.38’’- 2.5’’ x Width x LengthRound type:  2 1/2' Diameter x LengthStandard Stock Length:12’’18' 24' 30'36' 42' 48'59’’Basket Material:Titanium316 Stainless SteelZirconiumTantalumPolypropyleneStandard Length of Hook:3’’ 4’’5’’6’’ 7’’ 8’’Mesh Types:Large Expanded - 1/2' SWD x 1-1/4' LWD (75% mesh open area)Mini-Expanded - 3/16' SWD x 1/2' LWD (65% mesh open area)Perforated - 1/2' dia. on 11/16' staggered centers (50% mesh open area)Perforated Polypropylene - 1/4' dia. on 3/8' staggered centers (40% mesh open area)Amperage Rating per Hook:25AMP = 1/8' x 1' Double Contact Hook or 3/8' Square Bar Hook50AMP = 1/4' x 1' Double Contact ...
Hot Products / Hot Products More
2022 - 04 - 18
TIH In-line Chemical HeaterProcess fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The TIH offers unmatched performance and reliability with the ability to heat a variety of chemicalsup to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best-in-class performance over a wide range ...
2021 - 05 - 12
Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode b...
2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standar...
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务