Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → Anode Baskets

Anode Baskets/Plating Equipment & Supplies / Anode Accessories

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

Anode Baskets/Plating Equipment & Supplies / Anode AccessoriesDescriptionAnode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.Baskets Construction MaterialTitaniumZirconiumNiobiumStainless SteelCarbon SteelMonelStandard Styles and sizes of Anode BasketsRectangular – 2.5″ x 6″ x LengthRound – 2.5″ diameter x LengthStandard Stock Lengths Included 18″, 24″, 30″, other lengths are built to orderAll Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, MonelTECHNICAL INFORMATION:Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes in a bathMini-Expanded / ...

Catalog Download

Inquiry

Features

Anode Baskets/Plating Equipment & Supplies / Anode Accessories

Description

Anode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.

Baskets Construction Material

Titanium
Zirconium
Niobium
Stainless Steel
Carbon Steel
Monel

Standard Styles and sizes of Anode Baskets
Rectangular – 2.5″ x 6″ x Length
Round – 2.5″ diameter x Length
Standard Stock Lengths Included 18″, 24″, 30″, other lengths are built to order
All Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, Monel

TECHNICAL INFORMATION:

Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes in a bath

Mini-Expanded / Micro Mesh: 3/8″ x 1/2″ (approx 65 % mesh open area)
is the most commonly used mesh type, offering a compromise between enough open area and basket stability

Large Expanded: 1/2″ x 1.25″ (approx 75 % mesh open area)
is highly used for large anode ball applications

Perforated : 1/2″ diameter on 11/16″ staggered centers (approx 50 % mesh open area)
is the most durable and used with a variety of anode material

BASKET AMPERAGE and HOOKS:

Amp Rating Per Hook	DKE Hook Size	Square Bar Hook Size
25 AMP	1/8″ x 1″	3/8″
>50 AMP	1/4″ x 1″	1/2″
75 AMP	3/8″ x 1″	5/8″
100 Amp	1/2″ x 1″	3/4″

Rectangular Baskets are standard with 50 AMP/bskt Double Contact Hooks (DKE). Higher amperage is available (i.e. 100 amps, 150 amps & 200 + amps).

BASKET SIZING:
The following rules of thumb are recommended for sizing baskets:

Baskets should be 2″ to 4″ shorter than the longest piece of work
Baksets should be 1″ aobve the solution level
Hook length is measured from top of anode bar to 1″ above the solution level

ANODE QUANTITIES:

Anodes To Fill Basket	Rectangular basket 2.5″ x 6″ x L	Round 2″ Dia x L
Nickel Chips	3 lbs / inch of Length	0.8 lbs / inch of Length
Copper Chunks	2.5″ lbs / inch of Length	0.75 lbs / inch of Length
2″ Copper Balls	2 lbs / inch of Length	0.625 lbs / inch of Length

BASKET OPTIONS:

Inverted “V” lift Hooks, Inverted “U” hooks and reverse Lift Hooks for easier access in lifting baskets
Submergible Hooks
Loading Chutes for easier anode loading
Mesh on 4 sides of basket foe greater anode to cathode ratio
Thicker mesh material
TiClad Copper Hooks for higher amperage rating

Anode Baskets,Bags & Hooks

Release Time: 2021 - 05 - 12

Anode Baskets - Process Equipment Solutions

Release Time: 1986 - 05 - 15

Anode Baskets - Process Equipment SolutionsHigh anode efficiencySolid side channelsDurabilityReinforcement straps and standard hooksConstant current distributionNon-corrosiveHigh strengthLightweightUniform anode areaLess voltage lossLess plating bath contaminationCommercially, they are commonly available as:Rectangular titanium anode baskets99.6% commercially pure titanium grade 25” thickness6” widthLength ranges from 12” to 60” Cylindrical titanium anode baskets99.6% commercially pure titanium grade 2Diameter ranges from 2.5” to 5”Length ranges from 12” to 60”With 6”-long hooks Some titanium manufacturers specialize in custom-designed titanium anode baskets that come in other shapes and sizes.Reel to reel plating titanium anode basketsConforming anode basketsSpiral titanium anod...

Anode Baskets, Titanium Anode Baskets

Release Time: 2021 - 03 - 24

Anode Baskets, Titanium Anode Baskets:We provide many types of very durable titanium anode baskets to fit all metal finishers process lines. Some of the advantages of our titanium baskets are:VARIOUS MESH TYPES INCLUDEPerforatedExpanded metal with 60% to 80% open areaROUND CONFIGURATIONHeavily reinforcedVertical band supportsHorizontal band supportsSolid bottom constructionTop reinforcing support ringTypical 2 ½” diameter or larger if neededRECTANGULAR CONFIGURATIONDouble contact carrier hooksHooks extend well into basket for added supportHeavily vertical reinforcingTypical baskets are 2 ½” x 6” x the length of 8” to 72” or longer if neededCUSTOM BASKETS INCLUDEConforming anodeDipping baskets of all typesSpiralHIGH QUALITY MATERIALS:TitaniumZirconium316 stainless steeltantalumVAR...

Anode Baskets For Electroplating

Release Time: 1996 - 05 - 09

Anode Baskets For ElectroplatingOur anode baskets are built to the highest standards in the industry, and are backed by a five-year warranty on workmanship. As one of the largest stocking manufacturers of raw material, PH is pleased to provide customers with fast turnaround. If stock is not immediately available, We will design, build and ship custom anode baskets in two weeks – wherever you need them.Considerations For Basket Sizing:Baskets should be 2' to 4' shorter than the longest piece of work.Baskets should be 1' above the solution level.Hook length is measured from the top of anode bar to 1' above the solution level.Quantities for rectangular baskets should be three (3) 2 ½' x 6' baskets for every two feet above the barSizing And Styles:Rectangular Baske...

Anode Baskets/Plating Equipment & Supplies / Anode Accessories

Release Time: 2021 - 03 - 24

TITANIUM ANODE BASKETS AND ANODE HOOKS

Release Time: 2021 - 03 - 24

TITANIUM ANODE BASKETS AND ANODE HOOKS:Custom Anode BasketsIf your anode basket requirements call for other than standard configurations, consult with us for alternatives and custom basket possibilities.Our extensive history in custom anode basket manufacturing gives you the ability to work with directly with our equipment experts to create the exact configuration you’re looking for.Talk with us. Together we’ll find just the answer to your basket dilemma.Considerations for Basket Sizing:Baskets should be 2″ to 4″ shorter than the longest piece of work.Baskets should be 1″ above the solution level.Hook length is measured from the top of anode bar to 1″ above the solution level.Quantities for rectangular baskets should be three (3) 2 ½” x 6″ baskets for every two feet above the bar.Sizi...

Titanium Zr Stainless Steel Anode Baskets For Electroplating And PCB Industry

Release Time: 1994 - 12 - 30

Titanium Zr Stainless Steel Anode Baskets For Electroplating And PCB Industry、DescriptionAnode baskets for virtually all plating applications including, zinc, copper, chromium, nickel and tin. Try our anode baskets to help produce consistently uniform plating thickness and more money-saving efficiency in your plating process.Baskets Construction MaterialTitaniumZirconiumNiobiumStainless SteelCarbon SteelMonel Standard Styles and sizes of Anode BasketsRectangular – 2.5″ x 6″ x LengthRound – 2.5″ diameter x LengthStandard Stock Lengths Included 18″, 24″, 30″, other lengths are built to orderAll Baskets available in Titanium, Zirconium, Niobium, Stainless Steel, Carbon Steel, MonelTECHNICAL INFORMATION:Industry Standard calls for 2:1 Anode to Cathode ratio when calculating anodes i...

Titanium Anode Baskets

Release Time: 1997 - 06 - 19

Titanium Anode Baskets Standard Styles and SizesRectangular—21⁄2′′×6′′×LengthRound—21⁄2′′ Diameter × LengthStandard Stock lengths include 18′′, 24′′, 30′′. Other lengths built to order.All Baskets available in Titanium, Zirconium, Stainless Steel and Monel Mesh Types & Choosing the Right OneMini-Expanded—3⁄16′′×SWD×1⁄2′′LWD............ 65%meshopenareaLarge-Expanded—1⁄2′′×SWD×11⁄4′′LWD........... 75%meshopenareaPerforated — 1⁄2′′ dia. on 11⁄16′′ staggered centers . . . . . . . 50% mesh open areaSWD = Short Width Dimension LWD = Long Width Dimensions on Diamond PatternIndustry Standard calls for 2:1 Anode to Cathode ratio when calculating anodesin a bath.Mini-Expanded Mesh is the most commonly used mesh type, offering a compromise between...

Anode Bags

Release Time: 2001 - 08 - 01

Anode BagsPrecise Heater have been making high-quality anode bags for the electroplating industry for over 30 years. During that time we have strived to provide the highest quality anode bags quickly and economically. We can help with any special requests, troubleshoot problems and provide solutions.Anodes and baskets should be fitted with bags to prevent metal fines or metal residues from entering the electroplating solution. Poly nap and Polypropylene are widely used for anode bag because of its durability. However, other fabrics including cotton and other synthetics are also used successfully. We carry a complete line of materials for quick delivery.Anode Bags that Keep sludge in the bag…not in your bath! Almost all electroplating solutions require anode bags; chances are we’ve already ...

Anode baskets with bags

Release Time: 2016 - 07 - 21

Anode baskets with bags:Standard Style:Rectangular:Thick :1.38’’- 2.5’’ x Width x LengthRound type: 2 1/2' Diameter x LengthStandard Stock Length:12’’18' 24' 30'36' 42' 48'59’’Basket Material:Titanium316 Stainless SteelZirconiumTantalumPolypropyleneStandard Length of Hook:3’’ 4’’5’’6’’ 7’’ 8’’Mesh Types:Large Expanded - 1/2' SWD x 1-1/4' LWD (75% mesh open area)Mini-Expanded - 3/16' SWD x 1/2' LWD (65% mesh open area)Perforated - 1/2' dia. on 11/16' staggered centers (50% mesh open area)Perforated Polypropylene - 1/4' dia. on 3/8' staggered centers (40% mesh open area)Amperage Rating per Hook:25AMP = 1/8' x 1' Double Contact Hook or 3/8' Square Bar Hook50AMP = 1/4' x 1' Double Contact ...

Titanium plating anode basket with PP anode cathode bags for electroplating

Release Time: 1995 - 02 - 09

Titanium plating anode basket with PP anode cathode bags for electroplatingitanium anode basket for electroplatingProducts DescriptionItem nameTitanium anode basket for electroplatingMaterialPure Gr1 or Gr2 titaniumDimension750*40*35mm760*40*105mm200*630*40 mm250*1150*60mm250*700*50 mmOr according to customer’s designMesh Hole Size6*3 mm, 5*4 mm, 8*4mm, 10*5mm, 12.5*4.5mmManufacturing methodCut, Bent, WeldedApplicationsElectroplating industryLead Time7-15 daysTitanium anode baskets are among the most commercially-available titanium products nowadays. They are made by fabricating titanium meshes, tubes and sheets, and they enable electrolytes to flow smoothly and easily.There are several different kinds of titanium anode baskets. They come in different shapes and sizes. Here are some of the...

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16