Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksAnode Baskets Titanium anode baskets or anode cages are available in a variety of shapes, sizes and materials. They are designed to hold the anodes, which provide a source of metallic ions to be plated, and carry the electric current that drives the electroplating process.PreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If st...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater :SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644117(8)...

HX Style Spiral Over the side PTFE HEATERS

Release Time: 2016 - 07 - 19

HX Style Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → Immersion Coils Heat Exchangers > Metal Immersion Coils Exchanger

Serpentine Immersion Coils

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

Serpentine Immersion CoilsSerpentine Coils can be a simple “ U” shape, 4 pass, 6 pass or if need be 8 Pass Coil. These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.Heating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel andTitanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.Grid Steam CoilsTitan Industrial Heating Systems manufactures, Heating tank coils, Grid Steam coils & Serpent...

Catalog Download

Inquiry

Features

Serpentine Immersion Coils

Serpentine Coils can be a simple “ U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.

These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.

Heating Coils (Grid Steam, Serpentine, PTFE Coated)

PTFE Coated Heating Coils

PTFE Coated heating Coils are also available.

We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.

Serpentine Coils

Serpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.
These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.

Grid Steam Coils

Titan Industrial Heating Systems manufactures, Heating tank coils, Grid Steam coils & Serpentine Coils in many different sizes and shape to meet your specific needs.

PTFE Coated heating Coils are also available.

We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.

Special alloys available.

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Double Round Metal Immersion Coils Heat Exchangers

Release Time: 2016 - 07 - 21

Double Round Metal Immersion Coils Heat ExchangersDurable, low-profile designDesigned for the high demands of corrosive chemical heating or cooling for larger tanks and greater efficiency. Durable, low profile design. Every inch of coil surface is active exchange area. Check solution guide or consult with your chemical supplier for proper sheath material. Heavy wall, 20-gauge metal tubing available in steel, 316 stainless steel and titanium.DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-...

Double C Grid Coil Exchangers

Release Time: 2016 - 07 - 21

Double C Grid Coil ExchangersThe DCG Series Exchanger is one of two NEW INNOVATIVE DESIGNS offered by PH. This dual footprint design offer superior performance for use in heating and cooling applications where space is an issue.DG (Grid) C Series CoilDurable, low-profile designDesigned for the high demands of corrosive chemical heating or cooling for larger tanks and greater efficiency. Durable, low profile design. Every inch of coil surface is active exchange area. Check solution guide or consult with your chemical supplier for proper sheath material. Heavy wall, 20-gauge metal tubing available in steel, 316 stainless steel and titanium. DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) &#...

IMMERSION HEAT EXCHANGERS

Release Time: 2001 - 07 - 18

IMMERSION HEAT EXCHANGERSHORIZONTAL AND VERTICAL GRID COIL EXCHANGERSApplication:Available for in tank heating and cooling applications to be used in conjunction with a boiler or chiller system for aqueous solutions. Can be used with steam/water pressures up to 100PSI.Features: Available in 20 Gauge Steel, T316 S/S and Titanium. Horizontal and vertical design. Standard 1.0' NPT connections, 1.0' diameter tubing, 2.0' headers.Special length and 'L' shaped configurations available for bottom exchange applications. Options: Riser tube length extensions, exchanger hangers, sizes up 90 sq. ft. and 720,000 BTU sizes and water connections available.Grid coil heat exchangers are designed for immersion heating and coolingapplications where coils can be installed d...

Titanium Shell & Tube Heat Exchangers

Release Time: 2000 - 11 - 12

Titanium Shell & Tube Heat ExchangersOur titanium heat exchangers are fully constructed with titanium shell and corrugated titanium interior tubes, ensuring adequate turbulence and avoiding inefficient laminar flows. Our titanium shell and tube heat exchangers come in a wide range of cooling and heating capacities, from 1 Ton to 25 Ton cooling and 4 Ton to 375 Ton heating! These units can be used with a boiler for heating as well as glycol chillers or geothermal systems for cooling. These units provide the best combination of affordability, reliability, and efficiency in the industry today. These heat exchangers can be installed a number of ways to provide optimal heating and/or cooling for many applications. There are few wrong answers with installation, but reaching optimal heat...

Sepentina Metal Immersion Coils Exchangers

Release Time: 2016 - 07 - 21

Sepentina Metal Immersion Coils ExchangersSerpentine Series, 316 Stainless & Titanium Immersion CoilDesigned for the high demands of corrosive chemical heating or cooling.LengthIn./(mm)Model NumberCoils DepthInchSquare FeetSHIP WTLBS./(Kg)24(610)SPP4-24362.7510(4.5)36(915)SPP4-36363.7512(5.5)48(1220)SPP4-48364.7514(6.5)60(1525)SPP4-60365.7516(7.5)78(1980)SPP4-78367.2520(9)96(2440)SPP4-96368.7524(11) LengthIn./(mm)Model NumberCoils DepthInchSquare FeetSHIP WTLBS./(Kg)20(510)SPP6-20483.7512(5.5)30(760)SPP6-30485.0014(6.5)40(1015)SPP6-40486.2517(8)50(1270)SPP6-50487.5020(9)60(1525)SPP6-60488.7524(11)70(1780)SPP6-704810.0027(12.5) PRODUCT DESCRIPTIONDesigned for the high demands of corrosive chemical heating or cooling.FEATURESHeavy wall, 20-gauge metal tubing available in steel,...

PTFE Coated Heating Coils

Release Time: 2001 - 05 - 17

PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys are also available at PreciseHeaterHeating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel andTitanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.Grid Steam CoilsTitan Industrial Heating Systems manufactures, Heating tank coils, Grid Steam coils & Serpe...

Grid Steam Immersion Coils

Release Time: 2001 - 05 - 26

Grid Steam Immersion CoilsPreciseHeater manufactures, Heating tank coils, Grid Steam coils & Serpentine Coils in many different sizes and shape to meet your specific needs.PTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys available.Heating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on speci...

Helical Immersion Coils

Release Time: 2016 - 04 - 29

Helical Immersion CoilsEngineered for youSpace saving helical design for use in heating or cooling applications, alkaline or acid solutions and rinse tanks with low flow (laminar flow) rates. Check solution guide or consult with your chemical supplier for proper sheath material. Available in multi-layer coils with heavy wall, 18-gauge metal tubing available in steel, 316 stainless steel and titanium. Features & Values Wide variety of materials available for use inheating or cooling applications for alkaline or acidsolutionsand rinse tanks. Check solution guide orconsult with your chemical supplier for proper sheathmaterial Heavy wall, 18 gauge metal tubing available in steel,316 stainless steel and titanium 1” diameter tubing and 1” MNPT connection fittingsstandardS...

PLATE HEAT EXCHANGERS (PHE)

Release Time: 2001 - 07 - 04

PLATE HEAT EXCHANGERS (PHE)Plate Heat ExchangerPlate Heat Exchangers “PHE” are utilized in heating andcooling systems designs requiring maximum and efficient heattransfer performance in a small footprint.Applications include food industry, industrial processes, DHW,space heating, steam heating, HVAC free cooling and aquaticseawater systems.Plate materials are available in 316SS, Titanium, Hastelloy orSMO 254. Plate patterns and gaskets are selected based on fluidproperties and thermal heat transfer performance of materialsrequired. Connections are available ASNI flanged, ANSI stud& NPT.Aquatic sea water package includes TI plates, TI nozzles/inserts, 316 SS carry bar & tie bolts and corrosive inhibitingepoxy finish. “THE MOST EFFICIENT THERMAL EXCHANGEDESIGN IN THE INDUSTRY...

Serpentine Immersion Coils

Release Time: 1996 - 05 - 16

Immersion Coils

Release Time: 1996 - 05 - 13

Immersion CoilsPreciseHeater supplies immersion coils in many different configurations to meet the specific needs of the industry. Grid coils are used to achieve the maximum heat transfer area in the least amount of dimensional space. Serpentine and 'U' coils are used in situations were smaller heat transfer requirements are needed.Available Materials Of Construction:TitaniumStainless SteelZirconiumTantalumNiobiumStandard Immersion Coil Features:1' O.D. Titanium TubingVarious Mounting Options AvailableSupport Braces Between Riser Tubes for Coil StrengthAll Styles Equipped for Water or Steam ServicePressure tested at 100 PSIG100% Inert Gas Purged Welds5-Year WarrantyStandard Immersion Coil Options:Hanger StrapsAnti-Flotation ArmsSolution Level JacketsHorizontal or Vertical Orien...

TUBULAR HEATING/COOLING IMMERSION COILS

Release Time: 2005 - 04 - 21

TUBULAR HEATING/COOLING IMMERSION COILSTubular heat exchanger in Teflon plastic for corrosive applications.For use as a cooler or heater with water.Rigid design. Chemically resistant Teflon covering an Stainless steel tube.The design is very durable in heating applications where pressure spikes can occur.Only 2 fittings, in/out.Thoroughly welded design. Pressure tested at 13 bar.Easy to install. We design the coil to fit your tank.The design is open and easy to inspect and clean if necessary.Flexible and valuable!Max pressure 7 bar.A x B x ThicknessSurface areaCOILS400 x 815 x 50 mm1,2 m²COILS400 x 1650 x 50 mm2,3 m²COILS400 x 815 x 100 mm2,3 m²COILS800 x 430 x 35 mm0,7 m²COILS800 x 430 x 50 mm1,4 m²COILS800 x 430 x 100 mm2,4 m²COILS800 x 860 x ...

Tubular Heating & Cooling Exchanger

Release Time: 2006 - 04 - 12

Tubular Heating & Cooling ExchangerStainless steel, titanium or zirconium, depending on the liquid to be heated or cooled.Take less space than a grid coil or serpentinecoil.Higher efficiency than serpentine or gridcoil with equal surface area.Easy to install.Can easily be custom fabricated.For use in most alkaline or acid solutionsVertical or horizontal configurationsEvery inch of coil surfaceis active exchange area1.5 inch thick, low profile design 316 stainless steel, Zirconium, Hastelloy C and Titanium5.4 square foot to 30.5 square foot of exchange area100 PSI working pressure (steam or water) One layerA x B x ThicknessSurface areaCoils435 x 920 x 35 mm0,5 m²Coils580 x 1080 x 35 mm0,95 m²Coils600 x 800 x 35 mm0,8 m²Coils600 x 1620 x 35 mm1,9 m²Coils735 ...

Custom Grid Coils & Heat exchangers

Release Time: 2016 - 07 - 21

Custom Grid Coils & Heat exchangers Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solutions and rinse tanks. Custom designed to your specifications. Heavy wall, 18-20 gauge tubing available in 316 stainless steel, and titanium. Single point connections reduce the potential for leaks and simplify installation.100 PSI working pressure (steam or water).

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16