Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → PTFE Immersion Heaters

3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

3HXOL Series, Multi Element Fluoropolymer (PTFE) HeatersEXCELLENT CHEMICAL RESISTANCE TO AGGRESSIVE ACIDS Compatible with virtually any chemistry. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. 3 element, bottom heater, fluoropolymer (PTFE) sleeved 316 stainless elements. 3000-18000 watts, 208-600 volts.3HXOL Fluoropolymer HeaterSPECIFICATIONSWattages 3,000 Watts to 18,000 Watts Voltages 208 Volts to 600 VoltsSafety FeaturesGrounded internal metal element.Built-in thermal protector. Replaceable PI protector sta...

Catalog Download

Inquiry

Features

3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters

EXCELLENT CHEMICAL RESISTANCE TO AGGRESSIVE ACIDS

Compatible with virtually any chemistry. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. 3 element, bottom heater, fluoropolymer (PTFE) sleeved 316 stainless elements. 3000-18000 watts, 208-600 volts.

3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters

3HXOL Fluoropolymer Heater

SPECIFICATIONS

Wattages 3,000 Watts to 18,000 Watts

Voltages 208 Volts to 600 Volts

Safety Features

Grounded internal metal element.

Built-in thermal protector.

Replaceable PI protector standard for solutions .

Non-floating construction.

3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters

Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).

GUARDS SOLD SEPARATELY

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Single SPIRAL L-SHAPED Teflon PTFE HEATERS

Release Time: 2016 - 07 - 13

Single SPIRAL L-SHAPED Teflon PTFE HEATERS:Low Profile Bottom HeaterWATTSVOLTSHot zonemm/inRisermm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120240155(6)305(12)41(1040)HXLP.5106HXLP.5206 6 (2.5)1000120240205(8)305(12)41(1040)HXLP1108HXLP1208 7 (3.5)2000120240480430(17)460(18)40(1015)HXLP2112HXLP2212HXLP2412 8 (4)3000240480430(17)460(18)40(1015)HXLP3217HXLP3417 13 (6)4000240480510(20)460(18)40(1015)HXLP4220HXLP4420 15 (7)5000240480610(24)460(18)36(915)HXLP5224HXLP5424 18 (8)6000240480735(29)460(18)30(760)HXLP6229HXLP6429 21 (10)8000240480940(37)460(18)40(1015)2HXLP82372...

LOW PROFILE Teflon Fluoropolymer PTFE HEATERS

Release Time: 2016 - 07 - 19

Low Profile Over the Side Single Phase HeaterLOW PROFILE Teflon Fluoropolymer PTFE HEATERS:WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneDiamm/inModel No.Ship WT.Lbs./Kg500120240155(6)355(14)915(36)125(5)HXFP.5105-14HXFP.5205-14 6 (2.5)1000120240180(7)355(14)915(36)155(6)HXFP1106-14HXFP1206-14 7 (3.5)2000120240480230(9)430(17)890(35)205(8)HXFP2108-17HXFP2208-17HXFP2408-17 8 (4)3000240480255(10)585(23)890(35)230(9)HXFP3209-23HXFP3409-23 13 (6)4000240480305(12)735(29)890(35)280(11)HXFP4211-29HXFP4411-29 15 (7)5000240480330(13)890(35)790(31)305(12)HXFP5212-35HXFP5412-35 18 (8)6000240480355(14)1015(40)660(26)330(13...

TEFLON-PTFE-Fluoropolymer Bottom Heaters

Release Time: 2016 - 07 - 19

Low Profile Bottom HeaterFluoropolymer HeaterTEFLON/PTFE/Fluoropolymer Bottom Heaters:Compatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Low profile, bottom design. Inert to most solutions with a corrosion reisistant head. Low watt density. Built-in thermal protector and grounded element. Corrosion-resistant head. Heats up to 212°F (100°C). 500-6000 watts, 120-600 volts.WATTSVOLTSHot zonemm/inRisermm/inMax coldzoneDiamm/inModel No.Ship WT.Lbs./Kg500120240125(5)305(12)915(36)125(5)HXFP.5105-14HXFP.5205-14 6 (2.5)1000120240155(6)305(12)915(36)155(6)HXFP1106-14HXFP1206-14 7 (3.5)2000120240480205(8)460(18)890(35)205(8)HXFP2108-17HXFP2208-17HXFP2408-17 8 ...

Fluoropolymer PTFE Three Element Over the Side Immersion Heater

Release Time: 2016 - 07 - 19

Fluoropolymer PTFE Three Element Over the Side Immersion Heater :For Acid SolutionsCompatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. 3 element, O shaped fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). 1500-18000 watts, 120-600 volts. ApplicationsSurface Finishing WATTSVOLTSWidthmm/in Pad Lengthmm/inOverallmm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg1500120240263(10.5)152(6) 280(11)915(36)3HXOP1.5110-06-113HXOP1.5210-06-11 15 (6.8)3000240480280(11)152(6) &#...

Fluoropolymer PTFE Three Element L Shaped Heater

Release Time: 2016 - 07 - 19

3 Phase Bottom HeaterFluoropolymer PTFE Three Element L Shaped Heater:WATTSVOLTSWidthmm/in Pad Lengthmm/inRisermm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg3000240480203(8)330(13)460(18)915(36)3HXOLP3208-13-R3HXOLP3408-13-R 20 (9.1)4500240480263(10.5)280(11)460(18)890(35)3HXOLP4.5210.5-11-R3HXOLP4.5410.5-11-R 21 (9.5)6000240480263(10.5)485(19)460(18)890(35)3HXOLP6210.5-19-R3HXOLP6410.5-19-R 22 (10)9000240480263(10.5)585(23)460(18)890(35)3HXOLP9210.5-23-R3HXOLP9410.5-23-R 36 (16.3)12000240480263(10.5)760(30)460(18)890(35)3HXOLP12210.5-30-R3HXOLP12410.5-30-R 42 (19.1)15000240480263(10.5)915(36)460(18)790(31)3HXOLP15210.5-36-R3HXOLP15410.5-36-R&#...

HX Series,Fluoropolymer (PTFE) Single-Element Coil Heater

Release Time: 2023 - 02 - 27

HX Series,Fluoropolymer (PTFE) Single-Element Coil HeaterTypical ApplicationsCompatible with most plating tank solutions; inert to acids,anodizing and pickling solutions up to 190°F (88°C). Checkcompatibility guide on pages 11-88 and 11-89 and withchemical supplier for proper sheath material selection. Replaces more expensive alumina or graphite heaters.Design Features✴ 10 watts/in2 (1.4 watts/cm2) for long service life✴ Non-contaminating Fluoropolymer (PTFE) covered stainless steel elements✴ T1 thermal fuse protection standard; T2 bi-metal switchoptional✴ Grounded internal metal element for safety✴ UL listed for US and Canada✴ Lightweight, non-floating construction✴ Vapor-tight polypropylene terminal enclosure withuniversal mou...

Teflon-Fluoropolymer-PTFE-Single Element Coil-Heater

Release Time: 2016 - 07 - 19

Teflon-Fluoropolymer-PTFE-Single Element Coil-HeaterOpen Fluid Path Single Phase HeaterTeflon-Fluoropolymer-PTFE-Single Element Coil-Heater:WATTSVOLTSWidthmm/in Pad Lengthmm/inOverallmm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg500120240125(5)155(6) 280(11)915(36)HXOP.5105-06-11HXOP.5205-06-11 6 (2.5)1000120240155(6)180(7) 280(11)915(36)HXOP1106-07-11HXOP1206-07-11 7 (3.5)2000120240480155(6)255(10) 430(17)890(35)HXOP2106-10-17HXOP2206-10-17HXOP2406-10-17 8 (4)3000240480155(6)305(12) 585(23)890(35)HXOP3206-12-23HXOP3406-12-23 13 (6)4000240480155(6)485(19) 735(29)890(35)HXOP4206-19-29HXOP4406-19-29 ...

PTFE Over The Side Immersion Heater/ Three Element Teflon Heater

Release Time: 2016 - 07 - 13

3 Phase Over the SidePTFE Over The Side Immersion Heater/ Three Element Teflon HeaterWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg1000120240280(11)430(17)3HXP11173HXP1217 10 (4.5)1500120240480405(16)585(23)3HXP1.51233HXP1.52233HXP1.5423 11 (5)2000240480560(22)735(29)3HXP22293HXP2429 12 (5.5)3000240480735(29)890(35)3HXP32353HXP3435 14 (6.5)4000240480990(39)1195(47)3HXP42473HXP4447 17 (8)50002404801220(48)1500(59)3HXP52593HXP5459 20 (9)60002404801420(56)1725(68)3HXP62683HXP6468 23 (10.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleev...

HXL Series, Spiral L-Shaped Fluoropolymer (PTFE) Heaters

Release Time: 2000 - 03 - 04

HXL Series, Spiral L-Shaped Fluoropolymer (PTFE) HeatersEXCELLENT CHEMICAL RESISTANCE TO AGGRESSIVE ACIDSCompatible with virtually any chemistry. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. Spiral, low profile, bottom heater. Fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions. 500-9000 watts, 120-600 volts.FEATURESInert to most aqueous acid, alkaline, anodizing, & picking solutions.Rugged, heavy wall PTFE covered stainless steel element reduces permeation. Guaranteed 100% pinhole free.Space saving & long service life with low Watt density design of 10 W/in2 (1.5 W/cm2).Vapor-resistant, flame retardant polypropylene termimal...

Over The Side PTFE Immersion Heaters Special For 3 Phase Request

Release Time: 2000 - 02 - 01

Over The Side PTFE Immersion Heaters Special For 3 Phase Request WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg3000200-600125(5)280(11)41(1040)HXS3211HXS34116(2.5)4000200-600180(7)280(11)41(1040)HXS4211HXS44117(3.5)5000200-600305(12)430(17)41(1040))HXS5217HXS5417HXS26178(4)6000200-600405(16)585(23)41(1040)HXS6223HXS642313(6)7000200-600510(20)735(29)41(1040)HXS7229HXS742915(7)8000200-600635(25)890(35)36(915)HXS8235HXS843518(8)9000200-600735(29)1015(40)30(760)HXS9240HXS944021(10)10000200-600940(37)1195(47)41(1040)2HXS102472HXS1044725(12)12000200-6001120(44)1370(54)35(890)2HXS122542HXS1245428(13)Excellent chemical resistance to aggressive acids.FEATURES· PTFE sleeved 304 stainless elements inert to most solutions up to 212°F (100°C).·...

Fluoropolymer PTFE Six Element Over the Side Heater

Release Time: 2016 - 07 - 13

3 Phase Over the SideFluoropolymer PTFE Six Element Over the Side Heater :WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg2000120240480230(9)430(17)6HXP21176HXP22176HXP2417 10 (4.5)3000120240380(15)585(23)6HXP32236HXP3423 19 (8.5)4000240480535(21)735(29)6HXP42296HXP4429 22 (10)6000240480710(28)890(35)6HXP62356HXP6435 24 (11)8000240480965(38)1195(47)6HXP82476HXP8447 27 (12.5)100002404801195(47)1500(59)6HXP102596HXP10459 33 (15)120002404801400(55)1725(68)6HXP122686HXP12468 45 (20.5)PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 stainless el...

3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters

Release Time: 2001 - 03 - 24

HXO Series SIngle Tube, FLuoropolymer (PTFE) Immersion Heaters

Release Time: 2001 - 02 - 14

HXO Series Single Tube, FLuoropolymer (PTFE) Immersion HeatersProduct Features and Benefits:SUPERIOR CHEMICAL RESISTANCE: Inert tomost aqueous acid, alkaline, anodizing and picklingsolutions up to 212°F (100°C).RUGGED CONSTRUCTION: Heavy wall fluoropoly-mer (PTFE) covered stainless steel element reducespermeation and eliminates the need for gas purgesystems. Guaranteed 100% pinhole free.OUSTANDING PERFORMANCE: Low watt densitydesign (10 watts/square inch, 1.5w/cm2) for long servicelife.CORROSION RESISTANT HEAD: Vapor tight, flameretardant polypropylene terminal enclosure with 3-foot(.9m) flexible PVC liquid tight conduit.SAFETY FEATURES:Grounded internal metal element.Thermal protector built in. Replaceable PT-I fusestandard for solutions up to 190°F (88°C).Non-floating...

Nine Element Fluoropolymer (PTFE) Heaters

Release Time: 2016 - 07 - 13

3 Phase Over the Side Nine Element Fluoropolymer (PTFE) Heaters: WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480230(9)430(17)9HXP32179HXP3417 28 (13)4500240480380(15)585(23)9HXP4.52239HXP4.5423 33 (15)6000240480535(21)735(29)9HXP62299HXP6429 36 (16.5)9000240480710(28)890(35)9HXP92359HXP9435 40 (18)12000240480965(38)1195(47)9HXP122479HXP12447 49 (22.5)150002404801195(47)1500(59)9HXP152599HXP15459 60 (27.5)180002404801400(55)1725(68)9HXP182689HXP18468 67 (30.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 ...

Flexible Riser Over-the-Side PTFE Immersion Heaters

Release Time: 2021 - 03 - 31

Flexible Riser Over-the-Side Fluoropolymer (PTFE) Immersion HeatersExcellent chemical resistance to aggressive acids! Compatible with virtually any chemistryCustom, low watt density, flexible riser bottom heater has heavy-wall fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions up to 212°F (100°C) and a chemical resistance to aggressive acids! Grounded internal metal element and built-in thermal protector. Resettable P3 protector. Corrosion-resistant head. Single phase. 1000-6000 watts, 120-600 volts.ApplicationsSurface FinishingAnodizingPrecious Metal DepositionGeneral Metal FinishingUp to 100°C (212°F) 1000 to 6,000 Watts 120 to 600 Volts PTFE sleeved 316 stainless steel 1.HXSL Flex Riser PTFE Heater, 1kW, Cus...

Flexible Riser Bottom PTFE Immersion Heater

Release Time: 2016 - 03 - 01

Flexible Riser Bottom (Fluoropolymer) PTFE Immersion HeaterCompatible with virtually any chemistryFlexible riser, low watt density, bottom heater has Fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions up to 212°F (100°C) and a a chemical resistance to aggressive acids! Grounded internal metal element and built-in thermal protector. Resettable P3 J-type thermocouple standard. Single phase. 1000-6000 watts, 120-600 volts.ApplicationsSurface FinishingAnodizingPrecious Metal DepositionGeneral Metal FinishingUp to 100°C (212°F) 1000 to 6,000 Watts 120 to 600 Volts PTFE sleeved 316 stainless steel Features & ValuesInert to most aqueous acid, alkaline, anodizing, & pickling solutions up to 100°C...

Teflon(PTFE) Sheathed Chemical Bottom Heater

Release Time: 2012 - 08 - 26

Teflon(PTFE) Sheathed Chemical Bottom HeaterWattsVoltagePhaseDimension(mm)Model NumberSHIP Wt.(kg)2000120-600Single or Three300×150×40TFP2-123.53000240-600Single or Three350×180×40TFP3-144.54500240-600Single or Three450×200×40TFP4.5-1866000240-600Single or Three600×250×50TFP6-2479000240-600Single or Three750×350×50TFP6-30810000240-600Single or Three800×450×50TFP10-32912000240-600Single or Three900×500×50TFP12-361015000240-600Single or Three1000×600×50TFP15-401118000240-600Single or Three1100×700×50TFP18-43121. Fluoropolymer Sleeve Heating Element Quality resistance element is sleeved in braided material for even coil separation. The entire element is given an outer sleeving of pretested and pre-e...

PTFE (Fluoropolymer) Flange Immersion Heaters

Release Time: 2017 - 03 - 31

PTFE (Fluoropolymer) Flange Immersion HeatersPTFE Flanged Immersion HeatersExcellent chemical resistance to aggressive acidsHeavy wall fluoropolymer sheath (PTFE) covered stainless steel element reduces permeation. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Thermal protector built in. 3' and 6' flange sizes. Heats up to 180°F (82°C). 3000-7200 watts, 208-600 volts.Inert to most solutions Low Watt densitydesign saves space& ensures long life Corrosion-resistant head Built-in thermal protector& grounded element Up to 100°C (212°F) 1000 to 18,000 Watts 208 to 600 ...

Teflon (PTFE) Immersion Bottom Heater

Release Time: 2021 - 04 - 30

Teflon (PTFE) Immersion Bottom HeatersOverviewPreciseHeater immersion tank heaters are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact PreciseHeater with inquiries about other tank materials.Harsh Chemicals & DI WaterThese rugged and durable heaters come in grid, frame, and fence models, with outputs of 1.0 to 30.0 kW. They feature a low watt de...

PTFE/PFA Immersion Tank Heaters

Release Time: 2021 - 04 - 08

PTFE/PFA Immersion Tank HeatersMarketsSemiconductorLife SciencesApplicationsFluid HeatingPRODUCT OVERVIEWPreciseHeater's immersion tank heaters are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact PreciseHeater with inquiries about other tank materials.BOTH AGGRESSIVE CHEMISTRIES AND DEIONIZED WATERThese rugged and durable heaters come in grid, f...

PTFE Immersion Heater – FLAT ASSEMBLY TYPE B

Release Time: 2000 - 05 - 09

PTFE Immersion Heater – FLAT ASSEMBLY TYPE BDescriptionFLAT ASSEMBLY TYPE B – PTFE Immersion HeaterPower from 0.5 kW to 15 kWWith a fixing bracket for an easy installation on the side of the tankMinimum bulkModels adapted to all installations on the side of the tank. With a PVDF or PP fixing bracket to secure the heater on the side.Recommended up to 6 kW.Assembly Type BOn metallic frame coated PP, PVDF, FEP or stainless steel frame.Standard configuration: heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use on the side of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:REMOVABLE GUARDS FOR BPerforated plastic guard in PP or PVDF.ref in PP : PRPPP, ref in PVDF : PRPPFCABLE GLAND, 75MM DIAMETERAllow 300 mm ...

PTFE Immersion Heater – FLAT ASSEMBLY TYPE C

Release Time: 2021 - 05 - 12

PTFE Immersion Heater – FLAT ASSEMBLY TYPE CDescription FLAT ASSEMBLY TYPE C – PTFE Immersion Heater‘All-plastic’ modelDesigned for small tank configurations and low powersFrom 0.5 kWMinimum bulk‘All-plastic’ models particularly adapted to small tank configurations and low powers. Small overall dimensions as the structure follows the oval shape of the heating part.Recommended up to 6 kW.Assembly Type COn plastic structure PVDF, PP or FEP.Standard configuration: heating cable coated Teflon® FEP and frame with PP or PVDF strips.For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:FEET FOR CFor installation at the bottom of the tank, feet in PP or PVDF (standard height 50 mm)ref in PP : PIPP, ref in...

PTFE Immersion Heater - Flat Assembly Type F

Release Time: 2001 - 05 - 01

PTFE Immersion Heater - Flat F Assembly TypeDescription FLAT ASSEMBLY TYPE F – PTFE Immersion HeaterUniversal ‘all plastic’ modelIdeal for important powers (from 6kW)Up to 15 kWIdeal for large tanksUniversal model for all types of installation such as side of tank, bottom of tank with feet or on slidings.Rigid structure ideal for important powers.Assembly type FOn a plastic rod frame PVDF or PP.Standard configuration : heating cable coated Teflon® FEP and PP or PVDF rod frame.For use on the side or at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:FEET FOR FFor installation at the bottom of the tank, feet in PP or PVDF (standard height 100 mm)ref in PP : PIPPref in PVDF : PIPFEXTRA LENGTH OF CABLESElectri...

PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIES

Release Time: 2006 - 04 - 19

PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIESCompatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). 1000-6000 watts, 120-600 volts (600 volts on 4500 watts or lower only)ApplicationsChemical HeatingAnodizingSurface FinishingFeatures & ValuesInert to most aqueous acid, alkaline, anodizing, &pickling solutions up to 100°C (212°F)Rugged, heavy wall PTFE covered stainless steelelement reduces permeation. Guaranteed 100%pinhole free Space saving & long service life with low Watt densitydesign of 10 W/in2...

PTFE Immersion Heater-Flat Bottom

Release Time: 2001 - 05 - 20

PTFE Immersion Heater-Flat BottomPTFE Immersion HeaterPower from 0.5 kW to 15 kWMinimum bulkQuick to installModels adapted to all classic tank configurations and offers a large exchange surface in a minimum bulk.Assembly Type AOn metallic frame coated PP, PVDF, FEP or stainless steel frame.Standard configuration: heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.With options Feet & Cable-gland these models are specifically adapted to keep liquid storagetanks from freezing, all sizes with or without double wall. Installation through the inspection trap(ø 500 mm minimum). Can be installed in a tank filled when support feet are ordered on ea...

Industrial Immersion Heaters - Fluoropolymer Heater

Release Time: 2021 - 06 - 17

Industrial Immersion Heaters - Fluoropolymer HeaterHigh performance,non-corrodable electrictank heater The Popular is manufactured from high integrityfluoropolymers to give best protection againstdeterioration and to give high performance incorrosive solutions.Now available - fitted to orderOTP: Protect your plant from catastrophic heater failure.Switches the heater off if the element gets too hot.HPD: Protect your heater from low level failure.Simple conductive level device built into the heater. The element has an open construction to allow free flow of liquid across the surface and to limit solidretention, which is particularly important when used in solutions which generate solid deposition suchas electroless nickel and copper plating processes.The heater is thin enough to fi...

PFA coated Electric Immersion Heater

Release Time: 2001 - 05 - 02

PFA coated Electric Immersion HeaterOur immersion heaters consist of a stainless steel heating element encapsulated with a MoldflonTM-PFA tube using a unique process which minimizes air inclusion and improves thermal efficiency. The connecting harness consists of electrical cables which are wrapped together with a PTFE film and then shrouded in a PolytetraflonTM-PTFE outer shell which can be hermetically sealed to the tank using a suitable bulk-head fitting. The combination of materials used provide a thermally stable interconnecting system suitable for use in a wide range of applications and process temperatures.The heater head is machined from solid PolytetraflonTM-PTFE without any mechanical connections. The heater tubes and connecting harness are welded in place...

Teflon Tubular Heater

Release Time: 2014 - 04 - 01

Teflon Tubular HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 304 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 230 V2 for 3 phase 230 V3 for 3 phase 400 V4 for 1 phase 240 V5 for 3 phase 415 VWattsSurface RatingHot zoneOverallPTE60010+V1000 W2,1 W/cm²460 mm570 mmPTE80018+V1800 W2,3 W/cm²610 mm780 mmPTE10022+V2200 W2,0 W/cm²780 mm980 mmPTE12528+V2800 W2,0 W/cm²900 mm1210 mmPTE15033+V3300 W2,2 W/cm²1150 mm1470 mm

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16