Products Products
  / Products
Anode Baskets,Bags & Hooks
Anode Baskets,Bags & Hooks
Release Time: 2021 - 05 - 12
Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...
Pulse Reverse power supplies, Cabinet models
Pulse Reverse power supplies, Cabinet models
Release Time: 2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...
PVDF/PFA/PTFE Heat Exchangers
PVDF/PFA/PTFE Heat Exchangers
Release Time: 2021 - 03 - 16
PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...
Ruthenium Iridium Titanium Anodes
Ruthenium Iridium Titanium Anodes
Release Time: 2016 - 07 - 27
Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...
Inline Fluoropolymer Chemical Heat Exchangers
Inline Fluoropolymer Chemical Heat Exchangers
Release Time: 2016 - 07 - 21
Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-***  lnine chemical heat exch...
Metal Heating and Cooling Grid Coils
Metal Heating and Cooling Grid Coils
Release Time: 2016 - 07 - 21
Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm)     Length(In./mm)    Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes  Depth(In./mm)   Length(In./mm)      Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...
SmartOne PTC Max Single Over the Side Heater
SmartOne PTC Max Single Over the Side Heater
Release Time: 2016 - 07 - 21
SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...
Vertical Spiral Over the side Teflon PTFE HEATERS
Vertical Spiral Over the side Teflon PTFE HEATERS
Release Time: 2016 - 07 - 19
Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211   6  (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211   7  (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417   8   (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423   13   (6)4000120-600510(20)735(29)41(1040)HXP42...
3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters
3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters
Release Time: 2016 - 07 - 13
3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409  14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413  15  (7)6000240480485(19)3FLSP62193FLSP6419   16  (7.5)9000240480660(26)3FLSP92263FLSP9446  17  (8)12000240480840(33)3FLSP122333FLSP12433  18  (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449  21  (10)   5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...
Products Product Details

PTFE Immersion Heater - Flat Assembly Type F

Spec:
Scope:
Availability: 2021 - 05 - 12
Describe:
Explain:
PTFE Immersion Heater - Flat F Assembly TypeDescription FLAT ASSEMBLY TYPE F  – PTFE Immersion HeaterUniversal ‘all plastic’ modelIdeal for important powers (from 6kW)Up to 15 kWIdeal for large tanksUniversal model for all types of installation such as side of tank, bottom of tank with feet or on slidings.Rigid structure ideal for important powers.Assembly type FOn a plastic rod frame PVDF or PP.Standard configuration : heating cable coated Teflon® FEP and PP or PVDF rod frame.For use on the side or at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:FEET FOR FFor installation at the bottom of the tank, feet in PP or PVDF (standard height 100 mm)ref in PP : PIPPref in PVDF : PIPFEXTRA LENGTH OF CABLESElectri...
  • Features


PTFE Immersion Heater - Flat F Assembly Type


PTFE Immersion Heater - Flat Assembly Type

Description

 FLAT ASSEMBLY TYPE F  – PTFE Immersion Heater

  • Universal ‘all plastic’ model

  • Ideal for important powers (from 6kW)

  • Up to 15 kW

  • Ideal for large tanks

Universal model for all types of installation such as side of tank, bottom of tank with feet or on slidings.
Rigid structure ideal for important powers.

Assembly type F
On a plastic rod frame PVDF or PP.
Standard configuration : heating cable coated Teflon® FEP and PP or PVDF rod frame.
For use on the side or at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.

Accessories and Options:


FEET FOR F

For installation at the bottom of the tank, feet in PP or PVDF (standard height 100 mm)

ref in PP : PIPP

ref in PVDF : PIPF


EXTRA LENGTH OF CABLES

Electrical cable C of type HO5 VV-F or HO7 RN-F. Non heating cable N to go out of the tank.


FRAME SUPPORTS

Frame supports in PP or PVDF to fix on the edge of the tank.

ref in PP : SUPP

ref in PVDF : SUPF


REMOVABLE GUARDS FOR F

Perforated plastic guard in PP or PVDF.

ref in PP : PRPPP

ref in PVDF : PRPPF


CABLE GLAND, 75MM DIAMETER

Allow 300 mm extra on the H length (H=installation height on N)

ref in PP : PEPP, ref in PVDF : PEPF


WEDGES

Wedges for PP or PVDF frame to fix on the edge of the tank.

ref in PP : CAPP

ref in PVDF : CAPF


PTFE Immersion Heater - Flat Assembly Type

PTFE Immersion Heater - Flat Assembly Type

PTFE Immersion Heater - Flat Assembly Type

PTFE Immersion Heater - Flat Assembly Type


Vertical Spiral Over the side Teflon PTFE HEATERS
Vertical Spiral Over the side Teflon PTFE HEATERS
Release Time: 2016 - 07 - 19
Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211   6  (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211   7  (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417   8   (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423   13   (6)4000120-600510(20)735(29)41(1040)HXP42...
More
Single SPIRAL L-SHAPED Teflon PTFE HEATERS
Single SPIRAL L-SHAPED Teflon PTFE HEATERS
Release Time: 2016 - 07 - 13
Single SPIRAL L-SHAPED Teflon PTFE HEATERS:Low Profile Bottom HeaterWATTSVOLTSHot zonemm/inRisermm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120240155(6)305(12)41(1040)HXLP.5106HXLP.5206   6  (2.5)1000120240205(8)305(12)41(1040)HXLP1108HXLP1208   7  (3.5)2000120240480430(17)460(18)40(1015)HXLP2112HXLP2212HXLP2412   8   (4)3000240480430(17)460(18)40(1015)HXLP3217HXLP3417   13   (6)4000240480510(20)460(18)40(1015)HXLP4220HXLP4420   15   (7)5000240480610(24)460(18)36(915)HXLP5224HXLP5424   18   (8)6000240480735(29)460(18)30(760)HXLP6229HXLP6429   21   (10)8000240480940(37)460(18)40(1015)2HXLP82372...
More
LOW PROFILE Teflon Fluoropolymer PTFE HEATERS
LOW PROFILE Teflon Fluoropolymer PTFE HEATERS
Release Time: 2016 - 07 - 19
Low Profile Over the Side Single Phase HeaterLOW PROFILE Teflon Fluoropolymer PTFE HEATERS:WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneDiamm/inModel No.Ship WT.Lbs./Kg500120240155(6)355(14)915(36)125(5)HXFP.5105-14HXFP.5205-14   6  (2.5)1000120240180(7)355(14)915(36)155(6)HXFP1106-14HXFP1206-14   7  (3.5)2000120240480230(9)430(17)890(35)205(8)HXFP2108-17HXFP2208-17HXFP2408-17   8   (4)3000240480255(10)585(23)890(35)230(9)HXFP3209-23HXFP3409-23   13   (6)4000240480305(12)735(29)890(35)280(11)HXFP4211-29HXFP4411-29   15   (7)5000240480330(13)890(35)790(31)305(12)HXFP5212-35HXFP5412-35  18   (8)6000240480355(14)1015(40)660(26)330(13...
More
TEFLON-PTFE-Fluoropolymer Bottom Heaters
TEFLON-PTFE-Fluoropolymer Bottom Heaters
Release Time: 2016 - 07 - 19
Low Profile Bottom HeaterFluoropolymer HeaterTEFLON/PTFE/Fluoropolymer Bottom Heaters:Compatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Low profile, bottom design. Inert to most solutions with a corrosion reisistant head. Low watt density. Built-in thermal protector and grounded element. Corrosion-resistant head. Heats up to 212°F (100°C). 500-6000 watts, 120-600 volts.WATTSVOLTSHot zonemm/inRisermm/inMax coldzoneDiamm/inModel No.Ship WT.Lbs./Kg500120240125(5)305(12)915(36)125(5)HXFP.5105-14HXFP.5205-14   6  (2.5)1000120240155(6)305(12)915(36)155(6)HXFP1106-14HXFP1206-14   7  (3.5)2000120240480205(8)460(18)890(35)205(8)HXFP2108-17HXFP2208-17HXFP2408-17   8  ...
More
Fluoropolymer PTFE Three Element Over the Side Immersion Heater
Fluoropolymer PTFE Three Element Over the Side Immersion Heater
Release Time: 2016 - 07 - 19
Fluoropolymer PTFE Three Element Over the Side Immersion Heater :For Acid SolutionsCompatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. 3 element, O shaped fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). 1500-18000 watts, 120-600 volts. ApplicationsSurface Finishing                 WATTSVOLTSWidthmm/in Pad Lengthmm/inOverallmm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg1500120240263(10.5)152(6) 280(11)915(36)3HXOP1.5110-06-113HXOP1.5210-06-11   15  (6.8)3000240480280(11)152(6) &#...
More
Fluoropolymer PTFE Three Element L Shaped Heater
Fluoropolymer PTFE Three Element L Shaped Heater
Release Time: 2016 - 07 - 19
3 Phase Bottom HeaterFluoropolymer PTFE Three Element L Shaped Heater:WATTSVOLTSWidthmm/in Pad Lengthmm/inRisermm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg3000240480203(8)330(13)460(18)915(36)3HXOLP3208-13-R3HXOLP3408-13-R   20  (9.1)4500240480263(10.5)280(11)460(18)890(35)3HXOLP4.5210.5-11-R3HXOLP4.5410.5-11-R   21   (9.5)6000240480263(10.5)485(19)460(18)890(35)3HXOLP6210.5-19-R3HXOLP6410.5-19-R    22   (10)9000240480263(10.5)585(23)460(18)890(35)3HXOLP9210.5-23-R3HXOLP9410.5-23-R    36   (16.3)12000240480263(10.5)760(30)460(18)890(35)3HXOLP12210.5-30-R3HXOLP12410.5-30-R    42   (19.1)15000240480263(10.5)915(36)460(18)790(31)3HXOLP15210.5-36-R3HXOLP15410.5-36-R&#...
More
HX Series,Fluoropolymer (PTFE) Single-Element Coil Heater
HX Series,Fluoropolymer (PTFE) Single-Element Coil Heater
Release Time: 2023 - 02 - 27
HX Series,Fluoropolymer (PTFE) Single-Element Coil HeaterTypical ApplicationsCompatible with most plating tank solutions; inert to acids,anodizing and pickling solutions up to 190°F (88°C). Checkcompatibility guide on pages 11-88 and 11-89 and withchemical supplier for proper sheath material selection. Replaces more expensive alumina or graphite heaters.Design Features✴  10 watts/in2 (1.4 watts/cm2) for long service life✴  Non-contaminating Fluoropolymer (PTFE) covered stainless steel elements✴  T1 thermal fuse protection standard; T2 bi-metal switchoptional✴  Grounded internal metal element for safety✴  UL listed for US and Canada✴  Lightweight, non-floating construction✴  Vapor-tight polypropylene terminal enclosure withuniversal mou...
More
Teflon-Fluoropolymer-PTFE-Single Element Coil-Heater
Teflon-Fluoropolymer-PTFE-Single Element Coil-Heater
Release Time: 2016 - 07 - 19
Teflon-Fluoropolymer-PTFE-Single Element Coil-HeaterOpen Fluid Path Single Phase HeaterTeflon-Fluoropolymer-PTFE-Single Element Coil-Heater:WATTSVOLTSWidthmm/in Pad Lengthmm/inOverallmm/inMax Cold zonemm/inModel No.Ship WT.Lbs./Kg500120240125(5)155(6) 280(11)915(36)HXOP.5105-06-11HXOP.5205-06-11   6  (2.5)1000120240155(6)180(7)  280(11)915(36)HXOP1106-07-11HXOP1206-07-11   7  (3.5)2000120240480155(6)255(10)  430(17)890(35)HXOP2106-10-17HXOP2206-10-17HXOP2406-10-17   8   (4)3000240480155(6)305(12)  585(23)890(35)HXOP3206-12-23HXOP3406-12-23   13   (6)4000240480155(6)485(19)  735(29)890(35)HXOP4206-19-29HXOP4406-19-29   ...
More
PTFE Over The Side Immersion Heater/ Three Element Teflon Heater
PTFE Over The Side Immersion Heater/ Three Element Teflon Heater
Release Time: 2016 - 07 - 13
3 Phase Over the SidePTFE Over The Side Immersion Heater/ Three Element Teflon HeaterWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg1000120240280(11)430(17)3HXP11173HXP1217   10  (4.5)1500120240480405(16)585(23)3HXP1.51233HXP1.52233HXP1.5423    11  (5)2000240480560(22)735(29)3HXP22293HXP2429   12   (5.5)3000240480735(29)890(35)3HXP32353HXP3435   14   (6.5)4000240480990(39)1195(47)3HXP42473HXP4447   17   (8)50002404801220(48)1500(59)3HXP52593HXP5459   20   (9)60002404801420(56)1725(68)3HXP62683HXP6468    23   (10.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleev...
More
HXL Series, Spiral L-Shaped Fluoropolymer (PTFE) Heaters
HXL Series, Spiral L-Shaped Fluoropolymer (PTFE) Heaters
Release Time: 2000 - 03 - 04
HXL Series, Spiral L-Shaped Fluoropolymer (PTFE) HeatersEXCELLENT CHEMICAL RESISTANCE TO AGGRESSIVE ACIDSCompatible with virtually any chemistry. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. Spiral, low profile, bottom heater. Fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions. 500-9000 watts, 120-600 volts.FEATURESInert to most aqueous acid, alkaline, anodizing, & picking solutions.Rugged, heavy wall PTFE covered stainless steel element reduces permeation. Guaranteed 100% pinhole free.Space saving & long service life with low Watt density design of 10 W/in2 (1.5 W/cm2).Vapor-resistant, flame retardant polypropylene termimal...
More
Over The Side PTFE Immersion Heaters Special For 3 Phase Request
Over The Side PTFE Immersion Heaters Special For 3 Phase Request
Release Time: 2000 - 02 - 01
Over The Side PTFE Immersion Heaters Special For 3 Phase Request WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg3000200-600125(5)280(11)41(1040)HXS3211HXS34116(2.5)4000200-600180(7)280(11)41(1040)HXS4211HXS44117(3.5)5000200-600305(12)430(17)41(1040))HXS5217HXS5417HXS26178(4)6000200-600405(16)585(23)41(1040)HXS6223HXS642313(6)7000200-600510(20)735(29)41(1040)HXS7229HXS742915(7)8000200-600635(25)890(35)36(915)HXS8235HXS843518(8)9000200-600735(29)1015(40)30(760)HXS9240HXS944021(10)10000200-600940(37)1195(47)41(1040)2HXS102472HXS1044725(12)12000200-6001120(44)1370(54)35(890)2HXS122542HXS1245428(13)Excellent chemical resistance to aggressive acids.FEATURES· PTFE sleeved 304 stainless elements inert to most solutions up to 212°F (100°C).·...
More
Fluoropolymer PTFE Six Element Over the Side Heater
Fluoropolymer PTFE Six Element Over the Side Heater
Release Time: 2016 - 07 - 13
3 Phase Over the SideFluoropolymer PTFE Six Element Over the Side Heater :WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg2000120240480230(9)430(17)6HXP21176HXP22176HXP2417   10  (4.5)3000120240380(15)585(23)6HXP32236HXP3423    19  (8.5)4000240480535(21)735(29)6HXP42296HXP4429   22   (10)6000240480710(28)890(35)6HXP62356HXP6435   24   (11)8000240480965(38)1195(47)6HXP82476HXP8447   27   (12.5)100002404801195(47)1500(59)6HXP102596HXP10459   33   (15)120002404801400(55)1725(68)6HXP122686HXP12468    45   (20.5)PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 stainless el...
More
3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters
3HXOL Series, Multi Element Fluoropolymer (PTFE) Heaters
Release Time: 2001 - 03 - 24
3HXOL Series, Multi Element Fluoropolymer (PTFE) HeatersEXCELLENT CHEMICAL RESISTANCE TO AGGRESSIVE ACIDS Compatible with virtually any chemistry. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. 3 element, bottom heater, fluoropolymer (PTFE) sleeved 316 stainless elements. 3000-18000 watts, 208-600 volts.3HXOL Fluoropolymer HeaterSPECIFICATIONSWattages           3,000 Watts to 18,000 Watts                Voltages            208 Volts to 600 VoltsSafety FeaturesGrounded internal metal element.Built-in thermal protector. Replaceable PI protector sta...
More
HXO Series SIngle Tube, FLuoropolymer (PTFE) Immersion Heaters
HXO Series SIngle Tube, FLuoropolymer (PTFE) Immersion Heaters
Release Time: 2001 - 02 - 14
HXO Series Single Tube, FLuoropolymer (PTFE) Immersion HeatersProduct Features and Benefits:SUPERIOR CHEMICAL RESISTANCE: Inert tomost aqueous acid, alkaline, anodizing and picklingsolutions up to 212°F (100°C).RUGGED CONSTRUCTION: Heavy wall fluoropoly-mer (PTFE) covered stainless steel element reducespermeation and eliminates the need for gas purgesystems. Guaranteed 100% pinhole free.OUSTANDING PERFORMANCE: Low watt densitydesign (10 watts/square inch, 1.5w/cm2) for long servicelife.CORROSION RESISTANT HEAD: Vapor tight, flameretardant polypropylene terminal enclosure with 3-foot(.9m) flexible PVC liquid tight conduit.SAFETY FEATURES:Grounded internal metal element.Thermal protector built in. Replaceable PT-I fusestandard for solutions up to 190°F (88°C).Non-floating...
More
Nine Element Fluoropolymer (PTFE) Heaters
Nine Element Fluoropolymer (PTFE) Heaters
Release Time: 2016 - 07 - 13
3 Phase Over the Side Nine Element Fluoropolymer (PTFE) Heaters: WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480230(9)430(17)9HXP32179HXP3417   28  (13)4500240480380(15)585(23)9HXP4.52239HXP4.5423    33  (15)6000240480535(21)735(29)9HXP62299HXP6429   36 (16.5)9000240480710(28)890(35)9HXP92359HXP9435    40   (18)12000240480965(38)1195(47)9HXP122479HXP12447     49   (22.5)150002404801195(47)1500(59)9HXP152599HXP15459    60   (27.5)180002404801400(55)1725(68)9HXP182689HXP18468    67   (30.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 ...
More
Flexible Riser Over-the-Side PTFE Immersion Heaters
Flexible Riser Over-the-Side PTFE Immersion Heaters
Release Time: 2021 - 03 - 31
Flexible Riser Over-the-Side Fluoropolymer (PTFE) Immersion HeatersExcellent chemical resistance to aggressive acids! Compatible with virtually any chemistryCustom, low watt density, flexible riser bottom heater has heavy-wall fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions up to 212°F (100°C) and a chemical resistance to aggressive acids! Grounded internal metal element and built-in thermal protector. Resettable P3 protector. Corrosion-resistant head. Single phase. 1000-6000 watts, 120-600 volts.ApplicationsSurface FinishingAnodizingPrecious Metal DepositionGeneral Metal FinishingUp to 100°C (212°F) 1000 to 6,000 Watts 120 to 600 Volts PTFE sleeved 316 stainless steel 1.HXSL Flex Riser PTFE Heater, 1kW, Cus...
More
Flexible Riser Bottom PTFE Immersion Heater
Flexible Riser Bottom PTFE Immersion Heater
Release Time: 2016 - 03 - 01
Flexible Riser Bottom (Fluoropolymer) PTFE Immersion HeaterCompatible with virtually any chemistryFlexible riser, low watt density, bottom heater has Fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions up to 212°F (100°C) and a a chemical resistance to aggressive acids! Grounded internal metal element and built-in thermal protector. Resettable P3 J-type thermocouple standard. Single phase. 1000-6000 watts, 120-600 volts.ApplicationsSurface FinishingAnodizingPrecious Metal DepositionGeneral Metal FinishingUp to 100°C (212°F) 1000 to 6,000 Watts 120 to 600 Volts PTFE sleeved 316 stainless steel Features & ValuesInert to most aqueous acid, alkaline, anodizing, & pickling solutions up to 100°C...
More
Teflon(PTFE) Sheathed Chemical Bottom Heater
Teflon(PTFE) Sheathed Chemical Bottom Heater
Release Time: 2012 - 08 - 26
Teflon(PTFE) Sheathed Chemical Bottom HeaterWattsVoltagePhaseDimension(mm)Model NumberSHIP Wt.(kg)2000120-600Single or Three300×150×40TFP2-123.53000240-600Single or Three350×180×40TFP3-144.54500240-600Single or Three450×200×40TFP4.5-1866000240-600Single or Three600×250×50TFP6-2479000240-600Single or Three750×350×50TFP6-30810000240-600Single or Three800×450×50TFP10-32912000240-600Single or Three900×500×50TFP12-361015000240-600Single or Three1000×600×50TFP15-401118000240-600Single or Three1100×700×50TFP18-43121. Fluoropolymer Sleeve Heating Element Quality resistance element is sleeved in braided material for even coil separation. The entire element is given an outer sleeving of pretested and pre-e...
More
PTFE (Fluoropolymer) Flange Immersion Heaters
PTFE (Fluoropolymer) Flange Immersion Heaters
Release Time: 2017 - 03 - 31
PTFE (Fluoropolymer) Flange Immersion HeatersPTFE Flanged Immersion HeatersExcellent chemical resistance to aggressive acidsHeavy wall fluoropolymer sheath (PTFE) covered stainless steel element reduces permeation. Excellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Thermal protector built in. 3' and 6' flange sizes. Heats up to 180°F (82°C). 3000-7200 watts, 208-600 volts.Inert to most solutions Low Watt densitydesign saves space& ensures long life Corrosion-resistant head Built-in thermal protector& grounded element Up to 100°C (212°F) 1000 to 18,000 Watts 208 to 600 ...
More
Teflon (PTFE) Immersion Bottom Heater
Teflon (PTFE) Immersion Bottom Heater
Release Time: 2021 - 04 - 30
Teflon (PTFE) Immersion Bottom HeatersOverviewPreciseHeater immersion tank heaters are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact PreciseHeater with inquiries about other tank materials.Harsh Chemicals & DI WaterThese rugged and durable heaters come in grid, frame, and fence models, with outputs of 1.0 to 30.0 kW. They feature a low watt de...
More
PTFE/PFA Immersion Tank Heaters
PTFE/PFA Immersion Tank Heaters
Release Time: 2021 - 04 - 08
PTFE/PFA Immersion Tank HeatersMarketsSemiconductorLife SciencesApplicationsFluid HeatingPRODUCT OVERVIEWPreciseHeater's immersion tank heaters are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact PreciseHeater with inquiries about other tank materials.BOTH AGGRESSIVE CHEMISTRIES AND DEIONIZED WATERThese rugged and durable heaters come in grid, f...
More
PTFE Immersion Heater – FLAT ASSEMBLY TYPE B
PTFE Immersion Heater – FLAT ASSEMBLY TYPE B
Release Time: 2000 - 05 - 09
PTFE Immersion Heater – FLAT ASSEMBLY TYPE BDescriptionFLAT ASSEMBLY TYPE B – PTFE Immersion HeaterPower from 0.5 kW to 15 kWWith a fixing bracket for an easy installation on the side of the tankMinimum bulkModels adapted to all installations on the side of the tank. With a PVDF or PP fixing bracket to secure the heater on the side.Recommended up to 6 kW.Assembly Type BOn metallic frame coated PP, PVDF, FEP or stainless steel frame.Standard configuration: heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use on the side of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:REMOVABLE GUARDS FOR BPerforated plastic guard in PP or PVDF.ref in PP : PRPPP, ref in PVDF : PRPPFCABLE GLAND, 75MM DIAMETERAllow 300 mm ...
More
PTFE Immersion Heater – FLAT ASSEMBLY TYPE C
PTFE Immersion Heater – FLAT ASSEMBLY TYPE C
Release Time: 2021 - 05 - 12
PTFE Immersion Heater – FLAT ASSEMBLY TYPE CDescription FLAT ASSEMBLY TYPE C – PTFE Immersion Heater‘All-plastic’ modelDesigned for small tank configurations and low powersFrom 0.5 kWMinimum bulk‘All-plastic’ models particularly adapted to small tank configurations and low powers. Small overall dimensions as the structure follows the oval shape of the heating part.Recommended up to 6 kW.Assembly Type COn plastic structure PVDF, PP or FEP.Standard configuration: heating cable coated Teflon® FEP and frame with PP or PVDF strips.For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:FEET FOR CFor installation at the bottom of the tank, feet in PP or PVDF (standard height 50 mm)ref in PP : PIPP, ref in...
More
PTFE Immersion Heater - Flat Assembly Type F
PTFE Immersion Heater - Flat Assembly Type F
Release Time: 2001 - 05 - 01
PTFE Immersion Heater - Flat F Assembly TypeDescription FLAT ASSEMBLY TYPE F  – PTFE Immersion HeaterUniversal ‘all plastic’ modelIdeal for important powers (from 6kW)Up to 15 kWIdeal for large tanksUniversal model for all types of installation such as side of tank, bottom of tank with feet or on slidings.Rigid structure ideal for important powers.Assembly type FOn a plastic rod frame PVDF or PP.Standard configuration : heating cable coated Teflon® FEP and PP or PVDF rod frame.For use on the side or at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.Accessories and Options:FEET FOR FFor installation at the bottom of the tank, feet in PP or PVDF (standard height 100 mm)ref in PP : PIPPref in PVDF : PIPFEXTRA LENGTH OF CABLESElectri...
More
PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIES
PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIES
Release Time: 2006 - 04 - 19
PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIESCompatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). 1000-6000 watts, 120-600 volts (600 volts on 4500 watts or lower only)ApplicationsChemical HeatingAnodizingSurface FinishingFeatures & ValuesInert to most aqueous acid, alkaline, anodizing, &pickling solutions up to 100°C (212°F)Rugged, heavy wall PTFE covered stainless steelelement reduces permeation. Guaranteed 100%pinhole free Space saving & long service life with low Watt densitydesign of 10 W/in2...
More
PTFE Immersion Heater-Flat Bottom
PTFE Immersion Heater-Flat Bottom
Release Time: 2001 - 05 - 20
PTFE Immersion Heater-Flat BottomPTFE Immersion HeaterPower from 0.5 kW to 15 kWMinimum bulkQuick to installModels adapted to all classic tank configurations and offers a large exchange surface in a minimum bulk.Assembly Type AOn metallic frame coated PP, PVDF, FEP or stainless steel frame.Standard configuration: heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.With options Feet & Cable-gland these models are specifically adapted to keep liquid storagetanks from freezing, all sizes with or without double wall. Installation through the inspection trap(ø 500 mm minimum). Can be installed in a tank filled when support feet are ordered on ea...
More
Industrial Immersion Heaters - Fluoropolymer Heater
Industrial Immersion Heaters - Fluoropolymer Heater
Release Time: 2021 - 06 - 17
Industrial Immersion Heaters - Fluoropolymer HeaterHigh performance,non-corrodable electrictank heater The Popular is manufactured from high integrityfluoropolymers to give best protection againstdeterioration and to give high performance incorrosive solutions.Now available - fitted to orderOTP: Protect your plant from catastrophic heater failure.Switches the heater off if the element gets too hot.HPD: Protect your heater from low level failure.Simple conductive level device built into the heater. The element has an open construction to allow free flow of liquid across the surface and to limit solidretention, which is particularly important when used in solutions which generate solid deposition suchas electroless nickel and copper plating processes.The heater is thin enough to fi...
More
PFA coated Electric Immersion Heater
PFA coated Electric Immersion Heater
Release Time: 2001 - 05 - 02
PFA coated Electric Immersion HeaterOur immersion heaters consist of a stainless steel heating element encapsulated  with a MoldflonTM-PFA  tube using a unique process which minimizes air inclusion and improves thermal efficiency. The connecting harness consists of electrical cables which are wrapped together with a PTFE film and then shrouded in a PolytetraflonTM-PTFE outer shell which can be hermetically sealed to the tank using a suitable bulk-head fitting.  The combination of materials used  provide a thermally stable interconnecting system suitable for use in a wide range of applications and process temperatures.The heater head is machined from solid PolytetraflonTM-PTFE without any mechanical connections. The heater tubes and connecting harness are welded in place...
More
Teflon Tubular Heater
Teflon Tubular Heater
Release Time: 2014 - 04 - 01
Teflon Tubular HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 304 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 230 V2 for 3 phase 230 V3 for 3 phase 400 V4 for 1 phase 240 V5 for 3 phase 415 VWattsSurface RatingHot zoneOverallPTE60010+V1000 W2,1 W/cm²460 mm570 mmPTE80018+V1800 W2,3 W/cm²610 mm780 mmPTE10022+V2200 W2,0 W/cm²780 mm980 mmPTE12528+V2800 W2,0 W/cm²900 mm1210 mmPTE15033+V3300 W2,2 W/cm²1150 mm1470 mm
More
Hot Products / Hot Products More
Anode Baskets,Bags & Hooks
Anode Baskets,Bags & Hooks
2021 - 05 - 12
Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode b...
More
Pulse Reverse power supplies, Cabinet models
Pulse Reverse power supplies, Cabinet models
2021 - 04 - 01
Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power:  max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current:  max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standar...
More
PVDF/PFA/PTFE Heat Exchangers
PVDF/PFA/PTFE Heat Exchangers
2021 - 03 - 16
PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4&...
More
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
 
  Map
犀牛云提供企业云服务