Products Products
  / Products
Products Product Details

Rod-type Temperature thermostat

Spec:
Scope:
Availability: 2016 - 08 - 02
Describe:
Explain:
The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated into one single unit.The desired controlling temperature is set using a dial in the terminal casing  The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated in a single unit. Any change in the liquid temperature causes the fluid in the measuring system (capillary tube) to expand or contract and this moves the switch diaphragm. This, in turn, actuates a changeover contact which switches the heater on or off, as applicable. The desired controlling temperature is set with a knob in the terminal casing. Voltages ...
  • Features

1·.png

 The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated into one single unit.The desired controlling temperature is set using a dial in the terminal casing

  The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated in a single unit. Any change in the liquid temperature causes the fluid in the measuring system (capillary tube) to expand or contract and this moves the switch diaphragm. This, in turn, actuates a changeover contact which switches the heater on or off, as applicable. The desired controlling temperature is set with a knob in the terminal casing. Voltages greater than 230V and/or powers greater than 2.3 kW must be switched with an external power relay. The controller is normally equipped with the terminal casing made of PP. This has the degree of protection IP 65 (jetwaterproof). In the case of extremely high temperatures (liquid temperature >80°C) or if the controller is exposed to strongly oxidant chemicals (such as chrome electrolyte or HNO3 solutions) the terminal casing made of PVDF, should be used.



Release Time: 2016 - 07 - 21
Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrate all necessary components into a large control cabinet. Our solution – All components necessary for the safe operation of the heating system are contained in a light grey, glass fibre reinforced polyester enclosure (protection type IP 65). The control cabinet can be mounted with stainless steel mounting brackets onto a wall directly next to the container. Standard size Technical dataKTC230KTC400Dimensions(H×W×D) in mm515×415×230mm515×415×230mmWeight12,6Kg13,9KgSupply Voltage240V-50/60Hz or 480V-3P480V-3P,50/60HzRated Maximum Current16A40AMax.Total connected Load3.6KW/240V to 10.5KW/480V 3p27...
Release Time: 2016 - 07 - 21
With a temperature probe and a suitable electronic unit you can regulate and control the temperature of your liquids.The temperature probes are equipped with Pt100 sensors.Particularly in surface treatment, the precise measurement and control of temperatures is of decisive importance for the subsequent quality of the treated items. To keep the temperature of the liquid in storage tanks within the desired range, also prevents negative effects on the process liquids, such as freezing, crystallisation and excessive viscosity.The following functions need to be implemented: • Control of the temperature in order to automate process steps (such as keeping the desired process temperature)• Monitoring of the temperature in order to avoid possible damage to the process, the process liquid (e.g....
Release Time: 2016 - 07 - 21
The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated into one single unit.The desired controlling temperature is set using a dial in the terminal casing  The rod-type thermostat offers a low-cost solution for controlling the temperature of a liquid, since the temperature sensor and the switching circuit are integrated in a single unit. Any change in the liquid temperature causes the fluid in the measuring system (capillary tube) to expand or contract and this moves the switch diaphragm. This, in turn, actuates a changeover contact which switches the heater on or off, as applicable. The desired controlling temperature is set with a knob in the terminal casing. Voltages ...
Hot Products / Hot Products More
2016 - 07 - 13
(1).Excellent CHEMICAL RESISTANCE: Triple tubes Metal heaters are available for mostweak acid and alkaline solutions, plating, and phosphate solutions. (2).Heaters materials is available for Titanium and stainless steel (3).Outstanding Performance:35 watts per square inch (5.4 w/cm2) of heating capacity  (4).PVC RESISTANT HEATERS HEAD (5).Safety Thermal protection:replaceable t...
2016 - 07 - 13
(1).Excellent CHEMICAL RESISTANCE: Triple tubes Metal heaters are available for mostweak acid and alkaline solutions, plating, and phosphate solutions. (2).Heaters materials is available for Titanium and stainless steel (3).Outstanding Performance:35 watts per square inch (5.4 w/cm2) of heating capacity  (4).PVC RESISTANT HEATERS HEAD (5).Safety Thermal protection:replaceable t...
Service Hotline
020-31056110
客户端下载
Client Downloads
Copyright ©2005 - 2013 Guangzhou Precise Heater Co.,LTD
犀牛云提供企业云服务