Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → Metal Immersion Heaters

Electric Immersion Heaters-Industrial Heaters

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

Electric Immersion Heaters-Industrial HeatersElectric Immersion Heaters aremost suitable for direct heating ofnearly all process liquids and corres-ponding applications. Excellentchemical resistance is ensured bythe use of different immersion tubematerials and variable fitting optionshelp you to meet the individual re-quirements of heating installations.A long life span with optimum reli-ability is assured by using high qual-ity materials thereby ensuring fault-less operation of your system.Electric Immersion heater isconstructed on a modular basis andconsists of a tube, a long-life heat-ing cartridge, a terminal casing andthe lead.The Immersion Heater TubeWe can offer you the optimum ma-terial for every application. Theheated length (minimum immersiondepth) is marked by a ring which ...

Catalog Download

Inquiry

Features

Electric Immersion Heaters-Industrial Heaters

Electric Immersion Heaters are most suitable for direct heating of nearly all process liquids and corres- ponding applications. Excellent chemical resistance is ensured by the use of different immersion tube materials and variable fitting options help you to meet the individual re- quirements of heating installations. A long life span with optimum reli- ability is assured by using high qual- ity materials thereby ensuring fault- less operation of your system.

Electric Immersion heater is constructed on a modular basis and consists of a tube, a long-life heat- ing cartridge, a terminal casing and the lead.

The Immersion Heater Tube

We can offer you the optimum ma- terial for every application. The heated length (minimum immersion depth) is marked by a ring which is generally two-thirds of the tube length. The tube is not heated above this mark. The heated portion must always be covered with liquid even in the case of high liquid level fluc- tuation.

The Long-Life Heating Cartridge

Long-life heating cartridges are made from ceramic groove bodies with high electrical insulation values and good mechanical strength.

A high temperature resistance heat- ing wire is fitted as a coil in order to achieve the best possible heat radiation from tube to liquid. The cartridges for immersion heaters are available in rated power voltages up to a maximum of 500 volts for one, two and three phase connections.

The Terminal Casing BC

The BC terminal casing for immer- sion heaters consists of high tem- perature stabilized PP.

Problemfree use in most process liquids is en- sured by good mechanical and thermal strength as well as wide ranging chemical resistance. The PVDF terminal casing (BC / L) is re- commended in cases of extreme temperature (liquid temperature >80°C) or when subjected to strongly oxidizing chemicals

(e.g. chrome electrolyte or HNO3). The protective casing is IP 65 (jet- waterproof) according to EN 60529.

Easy access to the terminal (after fit- ting) when connecting the lead is also ensured by unscrewing the cap with the mounting wrench SB.

Electric Immersion Heaters-Industrial Heaters

The Lead wires

The PVC connecting lead is with a standard length of 1.6 m. Other lead lengths can be provided if desired.

Electrical Safety

The immersion heaters are classified as “safety class 1” according to EN 60519 / 1-2. All metal parts that are not protected from human con- tact are securely connected to earth. Using non-conductive tubes made of porcelain or glass, a “protective coil“ is also fitted to the heating cartridges in order to earth these tubes. The highest possible elec- trical safety is therefore ensured by using an earth leakage circuit breaker (ELCB).

Accessories

• Mounting Sleeve EM • Holding Sleeve HM • Support HB
• Protective Tube SRF • Mounting Wrench SB • Support THB

• Support SHB

Electric Immersion Heaters-Industrial Heaters

Metal Over-the-Side Immersion Heaters

Release Time: 2016 - 07 - 13

Electric Immersion heaters are tubular heating elements used to directly heat liquids found in a variety of industries from process heating, power, chemical, oil and gas, pharmaceuticals, metals processing to the food & beverage industry.Precise Heater has over 40 years of experience in the application, design, and manufacture of robust immersion tank heaters and process assemblies for immersion heating applications.1 or 3 Phase Over the SideMetal Over-the-Side Immersion Heaters:304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1000120240155(6)280(11)RSP1111RSP1211RTP1111RTP1211 7(3.5)2000240480255(10)430(17)RSP2217RSP2417RTP2217RTP2417 10(4.5)3000240480405(16)585(23)RSP3223RSP3423RTP3223RTP3423 11 (5)4000240480510(20)735(29...

Derated Triple Metal Over-the-Side Immersion Heaters

Release Time: 2016 - 07 - 13

Derated Triple Metal Over the Side HeatersDerated Triple Metal Over-the-Side Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240155(6)280(11)D3SP1.5111D3SP1.5211D3TP1.5111D3TP1.5211 21(9.5)3000240480255(10)430(17)D3SP3217D3SP3417D3TP3217D3TP3417 30(14)4500240480405(16)585(23)D3SP4.5223D3SP4.5423D3TP4.5223D3TP4.5423 33 (15)6000240480510(20)735(29)D3SP6229D3SP6429D3TP6229D3TP6429 39 (18)7500240480635(25)890(35)D3SP7.5235D3SP7.5435D3TP7.5235D3TP7.5435 45 (20.5)9000240480762(30)1015(40)D3SP9240D3SP9440D3TP9240D3TP9440 51 (23)12000240480940(37)1195(47)D3SP12247D3SP12447D3TP12247D3TP12447 63(28.5)135002404801120(44)1370(54)D3SP13.5254D3SP13.5454D3TP13.5254D3TP13.5454 69...

Triple Metal L-Shaped Immersion Heaters

Release Time: 2016 - 07 - 11

Triple L Shaped Metal Bottom Heater Triple Metal L-Shaped Immersion Heaters:FEATURESDurable, efficient chemical heaterBottom style, L-shaped MOTS heater with heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Three phase. Heats up to 180°F (82°C). Three phase. 3000-36000 watts, 120-600 volts.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid tight conduit.Temperature and level controls sized to match the heater.Lower watt densities for highly viscous solutions. 304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)...

Electric Immersion Heaters-Industrial Heaters

Release Time: 2021 - 03 - 31

Derated Single Metal Over the Side Heaters

Release Time: 2016 - 07 - 13

Derated Single Metal Over the Side Heaters:304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)500120240155(6)280(11)DSP.511DSP.521DTP.511DTP.521 7(3.5)1000240480255(10)430(17)DSP1217DSP1417DTP1217DTP1417 10(4.5)1500240480405(16)585(23)DSP1.5223DSP1.5423DTP1.5223DTP1.5423 11 (5)2000240480510(20)735(29)DSP2229DSP2429DTP2229DTP2429 13 (6)2500240480635(25)890(35)DSP2.5235DSP2.5435DTP2.5235DTP2.5435 15 (7)3000240480762(30)1015(40)DSP3240DSP3440DTP3240DTP3440 17 (8)4000240480940(37)1195(47)DSP4247DSP4447DTP4247DTP4447 23(10.5)45002404801120(44)1370(54)DSP4.5254DSP4.5454DTP4.5254DTP4.5454 24 (11)50002404801245(49)1500(59)DSP5259DSP5459DTP5259DTP545925(11.5)60002404801475(58)1739(68)DSP6268DSP...

Triple Metal Over-the-Side Immersion Heaters

Release Time: 2016 - 07 - 13

Triple Metal Over-the-Side Immersion Heaters: 304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480155(6)280(11)3SP32113SP34113TP32113TP3411 21(9.5)6000240480255(10)430(17)3SP62173SP64173TP62173TP6417 30(14)9000240480405(16)585(23)3SP92233SP94233TP92233TP9423 33 (15)12000240480510(20)735(29)3SP122293SP124293TP122293TP12429 39 (18)15000240480635(25)890(35)3SP152353SP154353TP152353TP15435 45 (20.5)18000240480762(30)1015(40)3SP182403SP184403TP182403TP18440 51 (23)24000240480940(37)1195(47)3SP242473SP244473TP242473TP24447 63(28.5)270002404801120(44)1370(54)3SP272543SP274543TP272543TP27454 69 (31)300002404801245(49)1500(59)3SP302593SP304593TP302593TP30459 75 (34...

Vertical Stack Triple Metal L-Shaped Immersion Heaters

Release Time: 2016 - 07 - 13

Triple - VerticalVertical Stack Triple Metal L-Shaped HeaterDurable, efficient chemical heaterL-shaped, vertical MOTS heater with heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Heats up to 180°C (82°F). 3,000-36,000 watts, 200-600 volts.304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)485(19)3LVSP32133LVSP34133LVTP32133LVTP3413 30 (14)6000240480430(17)940(37)3LVSP62173LVSP64173LVTP62173LVTP6417 33 (15)9000240480560(22)940(37)3LVSP92223LVSP94223LVTP92223LVTP9422 36(16.5)12000240480660(26)940(37)3LVSP122263LVSP124263LVTP122263LVTP12426 39 (18)15000240480790(31)940(37)3LVSP152313LVSP154313LVTP152313LVTP15...

Phosphate Tank Immersion Heaters

Release Time: 2021 - 03 - 30

Phosphate Tank Immersion Heater316 Stainless Steel PhosphatePhosphateDesigned for phosphate coating applicationsFor use in iron, zinc and manganese phosphate tanks. Check solution recommendation chart with your chemical supplier for proper sheath material selection. P4 protector for solutions up to 230°F (110°C). Single or three phase. 1000-10000 watts, 120-600 volts.Phosphate coatings are applied to iron or steel parts to increase corrosion resistance. Heating phosphates is difficult, but it's a prerequisite to getting the future coatings to apply. The end result is a superior metal finish.Phosphate Coating HeatersWe offer 316 stainless steel or Titanium sheath or PTFE coated heaters. If you choose SS, upgrade to electro-polish on the sheath. The Teflon o...

L-Shaped Metal Immersion Heaters

Release Time: 2016 - 07 - 13

L-Shaped Metal Immersion Heaters: 304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1000120240330(13)380(15)LSP1113LSP1213LTP1113LTP1213 10 (4.5)2000120240480430(17)485(19)LSP2117LSP2217LSP2417LTP2117LTP2217LTP2417 11 (5)3000240480560(22)635(25)LSP3222LSP3422LTP3222LTP3422 12 (5.5)4000240480660(26)635(25)LSP4226LSP4426LTP4226LTP4426 13 (6)5000240480790(31)940(37)LSP5231LSP5431LTP5231LTP5431 14 (6.5)6000240480915(36)1270(50)LSP6236LSP6436LTP6236LTP6436 15 (7)80002404801120(44)1270(50)LSP8244LSP8444LTP8244LTP8444 18 (8)90002404801270(50)1270(50)LSP9250LSP9450LTP9250LTP9450 20 (9)100002404801400(55)1270(50)LSP10255LSP10455LTP10255LTP10455 22 (10)12...

Derated Single L Shaped Metal Bottom Heater

Release Time: 2016 - 07 - 13

Derated Single L Shaped Metal Bottom Heater Derated Single L Shaped Metal Bottom Heater:Durable, efficient chemical heater. Available in Steel, 304 Stainless Steel, 316 Stainless Steel, and Titanium. FEATURESFor use in most aqueous alkaline solutions, plating and phosphatetanks. Check solution recommendation chart with your chemicalsupplier for proper sheath material selection.Heavy wall metal sheaths available in: steel, 304 stainlesss steel,316 stainless steel, titanium.Watt densities up to 18 watts per square inch (2.7 w/cm2) ensurelong service life.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid tight conduit.Temperature and level controls sized to match the heater.Lower watt densities for highly viscous solutions. 304...

Precise Heater 3HS Series, 3 Element Stainless Steel Heaters

Release Time: 2001 - 12 - 14

3HS Series, 3 Element Stainless Steel HeatersOver the side, durable, efficient, 3 element, tubular chemical heater. Available in Steel, 304 Stainless Steel, 316 Stainless Steel, and Titanium. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Three phase. Three phase. 3000-10500 watts, 200- 600 volts.FEATURESFor use in most aqueous alkaline solutions and rinse tanks. Checksolution recommendation chart with your chemical supplier forproper sheath material selection.Heavy wall metal sheaths available in: steel, 304 stainless steel,316 stainless steel, titanium.Watt densities up to 40 watts per square inch (6.2 w/cm2) ensurelong service life.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid t...

Metal Triple Tube Style Plating Immersion Heater

Release Time: 1995 - 02 - 16

Metal Triple Tube Style Plating Immersion Heater These heaters – the 3P, 3S, 3F, and 3T series – are built with three side-by-side elements and fit easily next to the wall of a tank. The standard wiring is three-phase, but single-phase is available. They have a watt density of 35 W/in².Select a heater below by wattage and sheath material to go to an ordering page, where you can choose voltage and other options. If you don't know what sheath material you need, you can use our Material Selector.Design Features for TMM2T1 thermal fuse protection standard; T2 bi-metal switch optionalGrounded for safetyVapor-tight polypropylene terminal enclosure with universal mounting flangeStandard 3-ft. flexible PVC liquid-tight conduit120, 240, 480 volts standard as listed...

TUBULAR HEATERS - Titanium Over the side Heater

Release Time: 1992 - 04 - 19

TUBULAR HEATERS - Titanium Over the side HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 316 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 120-240 V2 for 3 phase 120-240 V3 for 3 phase 208-600 V4 for 1 phase 208-480 V5 for 3 phase 415 V,600VWattsSurface RatingHot zoneLPTI50010+V1000 W2,1 W/cm²370 mm480 mmPTI60020+V2000 W3,0 W/cm²460 mm570 mmPTI80020+V2000 W2,3 W/cm²610 mm780 mmPTI80025+V2500 W2,9 W/cm²610 mm780 mmPTI10030+V3000 W2,6 W/cm²780 mm980 mmPTI12535+V...

Screwed Rod Electric immersion Heaters

Release Time: 2016 - 07 - 21

Screwed Rod Electric immersion Heaters304 SS316 SSTitaniumWATTSVOLTSPipe Thread(NPT)IN.Number of ElementsLengthMM./INModel No.Model No.Ship Wt.LBS./(Kg)200024048023205(8)3S22083S24083T22083T2408 5 (2.5)300024048023305(12)3S32123S34123T32123T3412 6 (3)400024048023460(18)3S42183S44183T42183T4418 7 (3.5)600024048023635(25)3S62253S64253T62253T6425 8 (4)800024048023815(32)3S82323S84323T82323T8432 10 (4.5)10000240480231015(40)3S102403S104403T102403T10440 12 (5.5)12000240480231220(48)3S122483S124483T122483T12448 14 (6)15000240480231320(52)3S152523S154523T152523T15452 15 (7)18000240480231370(54)3S182543S184...

Metal Single Tube Over The Side Immersion Heaters For Surface Finishing Industry

Release Time: 2002 - 02 - 14

Metal Single Tube Over The Side Immersion Heaters For Surface Finishing Industry304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.OverallMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1000120240155(6)280(11)RSP1111RSP1211RTP1111RTP12117(3.5)2000240480255(10)430(17)RSP2217RSP2417RTP2217RTP241710(4.5)3000240480405(16)585(23)RSP3223RSP3423RTP3223RTP342311(5)4000240480510(20)735(29)RSP4229RSP4429RTP4229RTP442913(6)5000240480635(25)890(35)RSP5235RSP5435RTP5235RTP543515(7)6000240480762(30)1015(40)RSP6240RSP6440RTP6240RTP644017(8)8000240480940(37)1195(47)RSP8247RSP8447RTP8247RTP844723(10.5)90002404801120(44)1370(54)RSP9254RSP9454RTP9254RTP945424(11)100002404801245(49)1500(59)RSP10259RSP10459RTP10259RTP1045925(11.5)120002404801475(58)1739(68)RSP12268RSP12468RTP12268RTP1246828(13) PRODUCT DESCRIPTIO...

Two Elements Screw Plug Heater

Release Time: 2001 - 05 - 07

Two Elements Screw Plug HeaterFeatures & Values3⁄4 For use in most aqueous alkaline solutions and rinsetanks. Check solution recommendation chart withyour chemical supplier for proper sheath materialselection 3⁄4 Heavy wall metal sheaths and screwplug in 316stainless steel and titanium 3⁄4 Watt densities up to 45-55 watts per square inch for316 Stainless steel and 3⁄4 Vapor tight, flame retardant PVC enclousre 3⁄4 Temperature and level controls sized to match the heater 3⁄4 Lower watt densities for highly viscous solutions

Nine elements Stainless steel Heaters

Release Time: 2016 - 07 - 13

Nine elements Stainless steel HeatersImmersion Heaters | industrial heatersTubularDurable, efficient chemical heaterOver the side, durable, efficient, 9 element, tubular chemical heater. Heavy wall metal sheaths available in 316 stainless steel. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Corrosion-resistant head. Three phase. Heats up to 180°F (82°C). Three phase. 9000-31500 watts, 208-600 volts. WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg9000240480255(10)430(17)9HSP92179HSP9417 16 (7.5)13500240480405(16)585(23)9HSP13.52239HSP13.5423 19 (9)22500240480510(20)735(29)9HSP22.52299HXP22.5429 23 (10.5)31500240480635(25)865(34)9HSP...

Over-the-Side Electric Immersion Heaters for Deep Tank

Release Time: 2016 - 07 - 13

Over-the-Side Electric Immersion Heaters for Deep Tank: 304SS316SSTITANIUMWATTSVOLTSHotzoneMM/IN.OverallMM/IN.Model No.Model no.Ship/Wt.LBS(Kg)120003804801475(48)2440(96)SP12496TP1249637(17)120003804801475(48)3050(120)SP124120TP12412045(20)120003804801475(48)3655(144)SP124144TP12414453(24)150003804801930(76)2440(96)SP15496TP1549637(17)150003804801930(76)3050(120)SP154120TP15412045(20)150003804801930(76)3655(144)SP154144TP15414453(24)180003804802085(82)2440(96)SP18496TP1849637(17)180003804802085(82)3050(120)SP184120TP18412045(20)180003804802085(82)3655(144)SP184144TP18414453(24)Durable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 35 watts/square inch (5.4 w/cm²).Vapor resi...

Derated Triple Metal L-Shaped Immersion Heaters

Release Time: 2016 - 07 - 13

Derated Triple Metal L-Shaped Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240330(13)380(15)D3LSP1.5113D3LSP1.5213D3LTP1.5113D3LTP1.5213 30 (14)3000240480430(17)940(37)D3LSP3217D3LSP3417D3LTP3217D3LTP3417 33 (15)4500240480560(22)940(37)D3LSP4.5222D3LSP4.5422D3LTP4.5222D3LTP4.5422 36(16.5)6000240480660(26)940(37)D3LSP6226D3LSP6426D3LTP6226D3LTP6426 39 (18)7500240480790(31)940(37)D3LSP7.5231D3LSP7.5431D3LTP7.5231D3LTP7.5431 42 (19)9000240480915(36)1270(50)D3LSP9236D3LSP9436D3LTP9236D3LTP9436 45 (20.5)120002404801120(44)1270(50)D3LSP12244D3LSP12444D3LTP12244D3LTP12444 54 (24.5)135002404801270(50)1270(50)D3LSP13.5250D3LSP13.5450D3LTP13.5250D3LTP13.5450 60&#...

2” TUBULAR SCREW PLUG HEATER

Release Time: 2001 - 05 - 10

2” TUBULAR SCREW PLUG HEATER T Series Heater Features and Benefits SUPERIOR CHEMICAL RESISTANCE:♦ For use in most aqueous alkaline solutions,and plating and phosphate tanks. Check solutionrecommendation chart with your chemical supplierfor proper sheath material selection.RUGGED CONSTRUCTION:♦ Heavy wall metal sheaths and screwplug available in:304 stainless steel316 stainless steelTitaniumOUTSTANDING PERFORMANCE:♦ Watt densities up to 35 watts per square inch (5.4w/cm2) ensure long service life.CORROSION RESISTANT HEAD:♦ Vapor resistant, flame retardant polypropylenetermimal enclosure with 3 ft (.9m) flexible PVC liquidtight conduit. SAFETY FEATURES:♦ Grounded construction.CERTIFICATIONS: cULus listed (except steel) and CEcompliant.SIZES: 1,000 watts to 12,000 watts.VOLTAGE...

3V Series, Triple Metal Deep Tank Heaters

Release Time: 2001 - 03 - 14

3V Series, Triple Metal Deep Tank Heaters3V Features and Benefits SUPERIOR CHEMICAL RESISTANCE:♦ Materials available for use in most aqueous alkalinesolutions, plating solutions, and rinse tanks. Checksolution recommendation chart or with your chemicalsupplier for proper sheath material selection.RUGGED CONSTRUCTION:♦ Heavy wall metal sheaths available in:Plain Steel304 stainless steel 316 stainless steel TitaniumLONG-LASTING PERFORMANCE:♦ Watt densitites of 35 watts per square inche (5.4cm/cm2 ensure long service life）CORROSION RESISTANT HEAD:♦ Vapor resistant, flame retardant polypropyleneterminal enclosure with 3-foot (.9mm) flexible PVCliquid tight conduit.SAFETY FEATURES: ♦ Grounded construction.♦ Thermal protection built in. Resettable P2 protector...

Ceramic Cartridge Heaters

Release Time: 2001 - 05 - 18

Ceramic Cartridge Heaters DescriptionCeramic Heating CartridgeDirect heating of liquids and under certain conditions of non-aqueous and non-liquid productsModular basisFrom 0.5 kW to 9.5 kWCeramic cartridge heaters are specially suited to the direct heating of liquids. Under certain conditions they can also be used for direct heating of non- aqueous and non-liquid mediaCeramic heating cartridgeThe cartridge heaters consist of ceramic groove bodies with high electrical insulation and excellent temperature fluctuation resistance. A high temperature heating wire is fitted as a coil in order to ensure good heat radiation and a long life-span of the cartridge.Accessories and OptionsTERMINAL CASING BCMaterial red terminal casing : PP, ref. BCMaterial white terminal casing : PVDF, ref. ...

ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTAT

Release Time: 2021 - 05 - 14

ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTATDescriptionImmersion heater element kits which include heater enclosure and digital thermostat with temperature probe. Immersion Heater with Digital Thermostat Single phase power supply connectionLow heat density, ideal for heating used/waste vegetable oils.Digital temperature controller2' BSP fittingThermocouple integrated into the elementThese heating elements are specifically designed with a low heat density. This means while the output of the heater element is still 800W or 2400W the surface of the element does not get as hot as other elements. This helps prevent degradation of the fluid being heated. Having a low heat density makes these heaters ideal for heating biodiesel and vegetable oil...

Three Elements Stainless steel Heater-Plating Immersion Heaters

Release Time: 2016 - 07 - 13

Three Elements Stainless steel Heater-Plating Immersion HeatersWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480280(11)430(17)3HSP32173HSP3417 9 (4)4500240480405(16)585(23)3HSP4.52233HSP4.5423 10 (4.5)7500240480535(21)735(29)3HSP7.52293HSP7.5429 12 (5.5)10500240480660(26)865(34)3HSP10.52343HSP10.5434 14 (6.5)PRODUCT DESCRIPTIONDurable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 40 watts/square inch (6.2 w/cm²).Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.Grounded construction and built in t...

Triple Tubes Metal Immersion Heater for Deep Tank

Release Time: 2016 - 07 - 13

Triple Tubes Metal Immersion Heater for Deep Tank304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)485(19)3LVSP32133LVSP34133LVTP32133LVTP3413 30 (14)6000240480430(17)940(37)3LVSP62173LVSP64173LVTP62173LVTP6417 33 (15)9000240480560(22)940(37)3LVSP92223LVSP94223LVTP92223LVTP9422 36(16.5)12000240480660(26)940(37)3LVSP122263LVSP124263LVTP122263LVTP12426 39 (18)15000240480790(31)940(37)3LVSP152313LVSP154313LVTP152313LVTP15431 42 (19)18000240480915(36)1270(50)3LVSP182363LVSP184363LVTP182363LVTP18436 45 (20.5)240002404801120(44)1270(50)3LVSP242443LVSP244443LVTP242443LVTP24444 54 (24.5)270002404801270(50)1270(50)3LVSP272503LVSP274503LVTP272503LVTP27450 60 (27.5)30000...

Six Elements 316 Stainless Steel Heaters

Release Time: 2016 - 07 - 13

Six Elements 316 Stainless Steel Heaters-Tubular Industrial Electric Immersion HeatersDurable, efficient metal heater. Available in Steel, 304 Stainless Steel, 316 Stainless Steel, and Titanium. WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg6000240480255(10)430(17)6HSP62176HSP6417 12 (5.5)9000240480405(16)585(23)6HSP92236HSP9423 13 (6)15000240480510(20)735(29)6HSP152296HXP15429 16 (7.5)21000240480635(25)865(34)6HSP212346HSP21434 18 (8.5)FEATURESFor use in most aqueous alkaline solutions, plating and phosphatetanks. Check solution recommendation chart with your chemicalsupplier for proper sheath material selection.Heavy wall metal sheaths available in: steel, 304 stainlesss st...

Over-the-Side Heaters

Release Time: 1996 - 11 - 21

Over-the-Side HeatersPreciseHeater Over-the-Side Immersion Heaters are designed toprovide years of trouble free operation if properly installed andmaintained. Please read and follow these instructions forinstalling and maintaining the heater.Over-the-Side Heaters are built with tubular electric resistanceelements soldered or welded to a fabricated box. The heatercan be installed in holding or storage tanks to heat a fluid.Standard designs utilize a riser tube to route the electricalwiring up above the fluid level of the tank.Instructions for Industrial Control Panels, if provided, are perIOM ENM - 2179. For additional product information andofferings, refer to Indeeco catalog literature on CirculationHeaters, Immersion Heaters, or Tubular Heating Elements.Standard construction is rated for...

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16