Horizontal Filter Pumps SystemHorizontal Filter Pumps3000 - 6000 L/HDiscs, cartridges, bagTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive pump• Filter chamber with welded bottom (no seal)• Discs (thin/thick paper, cloth), cartridges or pleated bag• All PP construction• Max. temperature PP 80˚C• Bottom-out or top-out model• Choice of slurry tank for carbon treatment, mixing and priming• Unions for rigid piping (PP or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, pressure gauge, air release and drain valveOptions• Hose connection• Contact manometer• Single open end cartridges
Horizontal Filter PumpsHorizontal Filter Pumps1000 - 3000 L/HCartridgesTypical applications• Plating and process industryFeatures• Magnetic drive pump• Filter chamber with welded bottom (no seal)• One or two filter chambers (parallel or serial)• String wound, spunbonded, pleated or carbon cartridge• All PP or PVDF construction• Max. temperature PP 80˚C / PVDF 100˚C• Unions for rigid piping (PP, PVDF or CPVC sockets)• Standard with 3 phase motor, thermal overload switch, lead without plug, air release and drain valveOptions• Hose connection• Pressure gauge• Single phase motor• Single open end cartridges
Vertical Pumps 2000 - 40000 L/HVertical Pumps2000 - 40000 L/HTypical applications• Alkaline cleaners• Electroless nickelFeatures• Sealless• Self priming• Integral drive shaft• Fume protectionOptions• Suction extension pipe• Customised mounting plate• Customised immersion length• Out of tank version (OT)• MPT threaded discharge pipe (X version)
Horizontal Disc Filtration SystemsOur smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.Designed for the filtration of nickel, copper and zinc electrolytes.Operating temperature to 180 °F (82 °C)For plating tanks from 200 to approximately 400 gallons depending on the type of process.Can be supplied with horizontal discs or cartridges depending on the application.Filter Pack Easily MaintainedAll filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.SpecificationsPrecoated Flow Rate (Filtering Capacity)600 gphOpen Pumping Capacity2,400 gphFiltration Surface Area7 ft²Number of Filter Media20...
Polypropylene Cartridge Filter Chambers 2008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate3,840 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight265.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Polypropylene Cartridge Filter Chambers 3008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Horizontal Pumps 1000 - 3000 L/HHorizontal Pumps1000 - 3000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters
Vertical Pumps 40000 - 180000 L/HVertical Pumps40000 - 180000 L/HTypical applications• Designed and developed for low life cycle cost in corrosive low pressure applications• Scrubbing (fume and air)• Waste water treatment• RinsingFeatures• Low energy consumption due to high hydraulic efficiency and IE3 class Premium Efficiency Motor• Machined high grade Simona® AlphaPlus™ PP• Elastomers EPDM• Sealless pump, can run dry endlessly• Round mounting plate for easy installation• Including discharge pipe with GF union • Impeller locked (no damage with wrong rotation direction)• Oversized motor according to Hendor heavy duty specifications• Stainless steel shaft and fasteners (no metal in contact with liquid) • Motor 4...
Vertical Pumps 12000 - 43000 L/HVertical Pumps12000 - 43000 L/HTypical applications• Plating - Rinsing - Filtration• Waste treatmentFeatures• Immersion length 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self-priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Hose connection• Out of Tank model
Horizontal Filter Pumps Horizontal Filter Pumps35000 - 110000 L/HDiscs, cartridges, bagsTypical applications• Plating and process industryFeatures• Service friendly, ideal cleaning access height• Magnetic drive or mechanical seal pump• Filterchamber with welded bottom (no seal)• Thin discs (large filter area) or thick discs (large dirt holding capacity)• Filter paper (thin/thick), cloth, cartridges or bags• Discs can be removed in manageable stacks• All PP construction, max. temperature 80˚C• Wheels for portability may be removed once installed• Multifunctional large round slurry tank with sloping bottom• Unions for rigid piping (PP, CPVC sockets)• Standard with 3 phase motor, lead without plug, pressure gauge, air release and drain...
Horizontal Pumps 2000 - 12000 L/HHorizontal Pumps2000 - 12000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection
Polypropylene Cartridge Filter Chambers 2012SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber12 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.