Titanium Shell & Tube Heat ExchangersOur titanium heat exchangers are fully constructed with titanium shell and corrugated titanium interior tubes, ensuring adequate turbulence and avoiding inefficient laminar flows. Our titanium shell and tube heat exchangers come in a wide range of cooling and heating capacities, from 1 Ton to 25 Ton cooling and 4 Ton to 375 Ton heating! These units can be used with a boiler for heating as well as glycol chillers or geothermal systems for cooling. These units provide the best combination of affordability, reliability, and efficiency in the industry today. These heat exchangers can be installed a number of ways to provide optimal heating and/or cooling for many applications. There are few wrong answers with installation, but reaching optimal heat...
Immersion Coil & Shell & Tube Type Heat ExchangerThe new type is different from the traditional welded heat exchanger. PreciseHeaterprovides a special joint design (one piece without welded line) with excellent chemical resistance of PFA Tube, the application of pressure and corrosion resistance has a very excellent performance.In addition, because of PFA tube excellent flatness and ultra-low metal ion precipitation characteristics, it is not easy to attach dirt when used, it can also maintain the purity of the liquid for a long time to extend the service life.It has excellent properties are widely used in high temperature, high purity, high corrosive environment, such as the semiconductor industry, panel industry, PCB and steel industry...etc.There are several types:Free TypeModul...
Teflon(Fluoroplastic) Immersion Heat Exchangers:The products and applications that depend on the characteristics of Teflon™ fluoropolymers Heat Exchanger range from aerospace to energy, cookware to textiles, semiconductors to smart cities. Fluoropolymers address the myriad issues faced by manufacturers and processorsTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849....
Sepentina Metal Immersion Coils ExchangersSerpentine Series, 316 Stainless & Titanium Immersion CoilDesigned for the high demands of corrosive chemical heating or cooling.LengthIn./(mm)Model NumberCoils DepthInchSquare FeetSHIP WTLBS./(Kg)24(610)SPP4-24362.7510(4.5)36(915)SPP4-36363.7512(5.5)48(1220)SPP4-48364.7514(6.5)60(1525)SPP4-60365.7516(7.5)78(1980)SPP4-78367.2520(9)96(2440)SPP4-96368.7524(11) LengthIn./(mm)Model NumberCoils DepthInchSquare FeetSHIP WTLBS./(Kg)20(510)SPP6-20483.7512(5.5)30(760)SPP6-30485.0014(6.5)40(1015)SPP6-40486.2517(8)50(1270)SPP6-50487.5020(9)60(1525)SPP6-60488.7524(11)70(1780)SPP6-704810.0027(12.5) PRODUCT DESCRIPTIONDesigned for the high demands of corrosive chemical heating or cooling.FEATURESHeavy wall, 20-gauge metal tubing available in steel,...
Teflon Immersion Coils ExchangerEliminates stray currents in tanks. Excellent chemical compatibility and rugged design for your heating or cooling application. All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction with a heavy duty CPVC/PVDF mounting bracket. Standard coils are PTFE and rated up to 80 PSI steam service. PFA coils are available for steam service up to 80 PSI. 10 PSI minimum steam pressure required for operation. Heavy wall tubing improves circulations and reduces pressure drop. Features & Values3⁄4 All wetted parts of fluoropolymer (FEP, PFA or PTFE)construction with a heavy duty CPVC mountingbracket.3⁄4 Heavy wall tubing improves circulation and minimizespressure drop. Larger coils constructed of 1/2 inch(13mm) tubing, smaller coils have 1/...
Plastic Immersion-Type Heat ExchangerFurther details:Possible materials: PE-RT,PFA,FEP, PP and PVDFTemperature range: -22 to 284 °F (depending on the material chosen)Working pressure range: 45.5 to 232 oF (depending on the material chosen and the operating temperature)Cooling/heating/condensing Heating and cooling of corrosive or scale forming fluids and highly concentrated inorganic acids in open tanksHeating, cooling, condensing or evaporation of corrosive media in vesselsCustomized design from modular, pre-manufactured tube sections10 to 375 ft2 heat transfer surfaceFor use with water, steam or cooling media High cooling and heating efficiency Flexible and compact designFully corrosion resistantSafe heat transfer mediumBest in class flow efficiencyEasy maintenance an...
Ultra High Purity Plastic Heat Exchanger of FEP/PTFE/PFA:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FN...
PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys are also available at PreciseHeaterHeating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel andTitanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on special Applications.Grid Steam CoilsTitan Industrial Heating Systems manufactures, Heating tank coils, Grid Steam coils & Serpe...
Fluoropolymer (PTFE/PFA) Heat Exchangers The Fluoropolymer Advantage -- A leader influoropolymer heat exchangers for over 50 years –now offers shell and tube heat exchangers madewith ultrahigh-purity (UHP) PFA tubing that allowschemical processors and others to conform to thehighest standards of purity.The UHP heat exchangers are single pass, countercurrent designs that incorporate PreciseHeater’s uniquehoneycomb construction. They are ideal for heatingand cooling ultrapure water, acids and othercorrosive chemicals typically used in electronics,pharmaceutical, and semiconductor manufacture.Our new XXP280 Heat exchanger is the latesttechnology for heating and cooling, corrosive and ultrapure chemicals. The heat exchanger’s100% Fluoropolymer construction and ruggeddesign will allow...
Grid Steam Immersion CoilsPreciseHeater manufactures, Heating tank coils, Grid Steam coils & Serpentine Coils in many different sizes and shape to meet your specific needs.PTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Special alloys available.Heating Coils (Grid Steam, Serpentine, PTFE Coated)PTFE Coated Heating CoilsPTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium.Serpentine CoilsSerpentine Coils can be a simple “U” shape, 4 pass, 6 pass or if need be 8 Pass Coil.These come in 316 or Titanium. They can be made with other materials check with factory on speci...
Electric Immersion coil heat exchangersImmersion coil heat exchangers are often used in a variety of applications where a fluid needs to either be heated, cooled, or maintained at a specified temperature by the end user. Immersion coils most common uses are in industrial applications for tanks that may be exposed to outside temperatures and weather, surface finishing applications where an acid is used to apply a coating to a product (this could be galvanizing, chrome plating, or nickel-plating applications), steel pickling applications, energy storage applications where a basic solution is used to harvest excess energy from a power grid, and many other applications that have heating or cooling needs.An immersion coil is a heat transfer device that is directly immersed into a tank of soluti...
High Quality Immersion Coils Heat ExchangersImmersion Coil Heat Exchangers have small tubes made out of flexible fluoropolymer that are braided into coils. Coils can be installed into almost any tank configuration. Braids are separated by spacers for optimum thermal performance.Unlike some immersion coils made of sub-quality material, PreciseHeater tubing is made of high-quality FEP, PFA or proprietary Q-Series resins. As the original manufacturer of fluoropolymer heat exchangers, PreciseHeater has the tightest quality specs and the most experience solving scale and fouling issues.PreciseHeater heat exchangers feature braided tubing bundles and unique fused ends that provide significantly better heat transfer from a smaller footprint than similar heat exchangers, allowing installation in v...