Products Products

/ Products

Release Time: 2021 - 05 - 12

Anode Baskets,Bags & HooksPreciseHeater is dedicated to being the premiere supplier of corrosion resistant anode baskets to the Metal Finishing, Plating and Anodizing Industries.Anode baskets are built to the highest standards in the industry and are backed by a five-year warranty on workmanship. If stock is not immediately available, the manufacturer will design, build and ship custom anode baskets in two weeks – wherever you need them.SpecificationsStandard StylesRectangular - 2-1/2' x 6' Round - 2-1/2' Diameter x Length Spiral - 2-1/4' I.D. - 2-5/8' O.D. x Length Standard Stock Length118 '24 '30 '36 '42 '48 'Basket MaterialCarbon Steel - Typically used for spiral baskets 316 Stainless Steel Monel Niobium ...

Pulse Reverse power supplies, Cabinet models

Release Time: 2021 - 04 - 01

Pulse Reverse power supplies, Cabinet modelsCooling: Water cooledOutput power: max. 64000 WattsEffective - and DC-current: max. 4240 APulse current: max. 9600 AEffective voltage: max. 6 VOutput power: max. 2 x 16000 Watts (max. 4 x 8000 Watts)Effective - and DC-current: max. 2 x 1060 A (max. 4 x 424 A)Reverse-current: max. 2 x 2400 A (max. 4 x 960 A)Effective voltage: Standard 2 x 6 V (4 x 6 V), other voltages on request (up to 600V)Typical applications:PCB lines Characteristic valuesSwitch mode technologyDual output, 4-fold output (single output optional) (see below matrix)Linearity inaccuracy Ripple less than Complex waveformsConstant current regulation (voltage regulation on request)SPI interface for control unit pe8005Fast rise and fall times (rectangular wav...

PVDF/PFA/PTFE Heat Exchangers

Release Time: 2021 - 03 - 16

PVDF/PFA/PTFE Heat ExchangersTeflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FNPT39.5(1000)33.9(860)3.15(80...

Ruthenium Iridium Titanium Anodes

Release Time: 2016 - 07 - 27

Ruthenium Iridium Titanium AnodesBecause of a very flexible production facility, we are able to manufacture anodes of all types: sheet, plate, mesh, wire, rod, tubular or combinations and/or assemblies of these materials. Their size and number vary from several cm2 to 2 m2 and from 1 to 10,000 pieces. The process in which the anodes are used determines size, shape and coating specification of an anode.Important parameters determining the anode design are:◆ The electrochemical cell or installation wherein the anodes are used◆ The process conditions, such as electrolyte composition, temperature, current density, design life, etc.◆ Mechanical load of the anode◆ Capacity of electrical conductivity of the base material.All anodes are produced according to customer specifications. When these spe...

Inline Fluoropolymer Chemical Heat Exchangers

Release Time: 2016 - 07 - 21

Inline Fluoropolymer Chemical Heat Exchangers:Fluoropolymer Inline Heat ExchangersExchange Area(Sq.Ft)LengthIn(mm)DIAIn(mm)PP ShellPVDF Shell6.515.7(400)10(255)XCH6.5-***XPH6.5-***1315.7(400)12(305)XCH13-***XPH13-***2020(500)14(355)XCH20-***XPH20-***3020(500)14(355)XCH30-***XPH30-***4024(600)14(355)XCH40-***XPH40-***5024(600)16(405)XCH50-***XPH50-***6027.5(700)16(405)XCH60-***XPH60-***7027.5(700)16(405)XCH70-***XPH70-***8031.4(800)16(405)XCH80-***XPH80-***9031.4(800)18(460)XCH90-***XPH90-***10031.4(900)18(460)XCH100-***XPH100-***11031.4(900)20(510)XCH110-***XPH110-***12039(1000)20(510)XCH120-***XPH120-***13039(1000)20(510)XCH130-***XPH130-***14043(1100)22(560)XCH140-***XPH140-***15043(1100)22(560)XCH150-***XPH150-***16047(1200)22(560)XCH160-***XPH160-*** lnine chemical heat exch...

Metal Heating and Cooling Grid Coils

Release Time: 2016 - 07 - 21

Metal Heating and Cooling Grid CoilsDesigned for the high demands of corrosive chemical heatingor cooling DOUBLE C STYLE GRID COILS DCGExchange Area Squre Ft12-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number6.582612.5/31814/35526DCG-148.82612.5/31818/45726DCG-18122612.5/31824/60926DCG-2415.62612.5/31830/76226DCG-30192612.5/31836/91426DCG-3625.82612.5/31848/1,21926DCG-48292612.5/31854/1,37126DCG-5434.92612.5/31864/1,62526DCG-6418-1/2” WIDTH Tubes Depth(In./mm) Length(In./mm) Model number133818.5/47018/45738DCG-18183818.5/47024/60924DCG-24233818.5/47030/76224DCG-3027.93818.5/47036/91424DCG-36353818.5/47048/1,21924DCG-4842.93818.5/47054/1,37124DCG-54513818.5/47064/1,62524DCG-6459.53818.5/...

SmartOne PTC Max Single Over the Side Heater

Release Time: 2016 - 07 - 21

SmartOne PTC Max Single Over the Side Heater : SmartOne heaters' elements are PTC positive temperature coefficient semiconductors – making the heaters self-limiting. That is, they reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), meaning they are especially safe for process applications. WATTSVOLTSHot ZoneMM/IN.Overall MM/IN.304SS316SSTitaniumShip Wt.Lbs./(Kg)1000120240180(7)280(11)S1SP1111S1SP1211S1TP1111S1TP12117(3.5)2000240480330(13)430(17)S1SP2117S1SP2217S1TP2117S1TP221710(4.5)3000240480460(18)585(23)S1SP3223S1SP3423S1TP3223S1TP342311(5)4000240480610(24)735(29)S1SP4229S1SP4429S1TP4229S1TP442913(6)5000240480760(30)890(35)S1SP5235S1SP5435S1TP5235S1TP543515(7)6000240480890(35)1040(41)S1SP6241S1SP6441S1TP6241S1TP644...

Vertical Spiral Over the side Teflon PTFE HEATERS

Release Time: 2016 - 07 - 19

Vertical Spiral Over the side Teflon PTFE HEATERS:Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY WATTSVOLTSHot zonemm/inOverallmm/inMax coldzoneModel No.Ship WT.Lbs./Kg500120-240125(5)280(11)41(1040)HXP.5111HXP.5211 6 (2.5)1000120-240180(7)280(11)41(1040)HXP1111HXP1211 7 (3.5)2000120-240305(12)430(17)41(1040))HXP2117HXP2217HXP2417 8 (4)3000120-600405(16)585(23)41(1040)HXP3223HXP3423 13 (6)4000120-600510(20)735(29)41(1040)HXP42...

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion HeatersTubular Heater Industrial Heating Heater: 3' 150 lbs. Stainless Steel Flange (3 Elements) Heater:WATTSVOLTSLengthMM./INModel NumberShip Wt.LBS./(Kg)3000240480230(9)3FLSP32093FLSP3409 14 (6.5)4500240480330(13)3FLSP4.52133FLSP4.5413 15 (7)6000240480485(19)3FLSP62193FLSP6419 16 (7.5)9000240480660(26)3FLSP92263FLSP9446 17 (8)12000240480840(33)3FLSP122333FLSP12433 18 (8.5)150002404801015(41)3FLSP152413FLSP15441 20 (9)180002404801245(49)3FLSP182493FLSP18449 21 (10) 5' 150 lbs. Stainless Steel Flange (6 Elements) Heater: WATTSVOLTSLengthMM./INModel NumberShi...

Products Product Details

You are here : Home → Products → Flange Heater

41" 15KW 48 watts per sq. inch Flange Heater

Spec:

Scope:

Availability: 2021 - 05 - 12

Describe:

Explain:

41' 15KW 48 watts per sq. inch Flange Heater41 inch, 15kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

Catalog Download

Inquiry

Features

41' 15KW 48 watts per sq. inch Flange Heater

41 inch, 15kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.

Titanium/316SS/Incoloy sheath element (other sheath material available)
Titanium/316SS/Incoloy thermowell
150lb. flange (300lb. available)
1 or 3 phase
208 to 600 volt
N1, N4 and N7 Terminal housing options

For heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.

Optional Flange Heater Configurations:

T1, T2 and T3 Thermostats
Process Thermocouples: J, K or 100 ohm RTD
Hi-Limit over temp thermocouple clamped to element sheath: J or K

3’’-5’’-6’’ Flange Heaters -Tubular Flanged Immersion Heaters

Release Time: 2016 - 07 - 13

18" 6KW 48 watts per sq. inch Flange Heater

Release Time: 2002 - 05 - 28

18' 6KW 48 watts per sq. inch Flange Heater18 inch, 6kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208-600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

20" 7.5KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 08

20' 7.5KW 48 watts per sq. inch Flange Heater20 inch, 7.5kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

26" 9KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 01

26' 9KW 48 watts per sq. inch Flange Heater26 inch, 9kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

Flanged Immersion Heater

Release Time: 1996 - 05 - 08

Flanged Immersion HeaterImmersion HeatersOur immersion heaters has long been recognised as the most versatile and widely used source of electric, commercial, industrial, scientific and domestic heat. Our immersion heaters are used for a number of applications which include fluids, including water, oils, chemicals and more.Our industrial immersion heaters are reliable, strong, adaptable and suitable for an unlimited number of applications and environments. Elmatic has the expertise, design and manufacturing facilities to meet your particular requirements, whether it’s a large quantity requirement or a special one.Depending on the application required, these immersion heaters can be made in various types of materials including incoloy, stainless steel, mild steel and titanium. Enabling tempe...

41" 15KW 48 watts per sq. inch Flange Heater

Release Time: 2021 - 05 - 10

33" 12KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 09

33' 12KW 48 watts per sq. inch Flange Heater33 inch, 12KW, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

48" 18KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 23

48'' 18KW 48 watts per sq. inch Flange Heater48 inch, 18kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

52" 20KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 09

52' 20KW 48 watts per sq. inch Flange Heater52 inch, 20kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

Explosion-Proof Flanged Immersion Heaters

Release Time: 1998 - 11 - 03

Explosion-Proof Flanged Immersion HeatersPreciseHeater’s explosion-proof flanged immersion heaters are one of the most widely used solutions for heating fluids and gases in hazardous locations. CSA approved for Class 1, Division 1, Group B, C and D locations and/or approved for ATEX and IECEx Zone 1 and/or Zone 21 locations. PreciseHeater's explosion-proof flange heaters are designed for use in tanks, vessels, and in-line heating.Product HighlightsWattages up to 8.5 megawattsWatt densities up to 200 w/in2Voltages up to 600VElement sheath temperatures up to 1,500°FMultiple flange and element materialsFlange sizes up to 30' and 2500# ASME B16.5Standard Construction FeaturesANSI B16.5 150# or 300# flange 3' up to 30' (max flange size of 24' for div 1 ...

62" 25KW 48 watts per sq. inch Flange Heater

Release Time: 1996 - 05 - 16

62' 25KW 48 watts per sq. inch Flange Heater62 inch, 25kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 or 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

78" 30KW 48 watts per sq. inch Flange Heater

Release Time: 2021 - 05 - 10

78' 30KW 48 watts per sq. inch Flange Heater78 inch, 30kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 or 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

Hot Products / Hot Products More

Anode Baskets,Bags & Hooks

2021 - 05 - 12

Pulse Reverse power supplies, Cabinet models

2021 - 04 - 01

PVDF/PFA/PTFE Heat Exchangers

2021 - 03 - 16